SP1200SA KEXIN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

www.kexin.com.cn 1 Thyristors ■ Features

  • Low voltage overshoot
  • Low on-state voltage
  • Does not degrade with use ■ Absolute Maximum Ratings Ta = 25℃ Parameter Symbol Rating Unit Thermal Resistance Junction to Ambient RthJA 90 ℃/W Junction Temperature TJ -40 to 150 Storage Temperature Range Tstg -65 to 150 1.950 2.650 4.600 4.050 5.600 5.100 3.95 3.30 2.200 1.950 2.00 2.8 1.600 0.750 0.200 0.050 0.410 0.150 Recommended Land Pattern DO-214AA(SMB) Unit: mm ■ Electrical Characteristics (Ta = 25℃, unless otherwise noted.) Part Number Marking VDRM @l DRM =5µA VS @100V/µs IH IS IT VT @IT=2.2 A Capacitance @1MHz, 2V bias V min V max SP1200SA P12A 100 130 120 800 2.2 4 30 45 SP2000SA P20A 180 220 120 800 2.2 4 25 35 SP2500SA P25A 230 290 120 800 2.2 4 20 35 SP1200SB P12B 100 130 120 800 2.2 4 30 65 SP2000SB P20B 180 220 120 800 2.2 4 25 95 SP2500SB P25B 230 290 120 800 2.2 4 35 95 SP1200SC P12C 100 130 120 800 2.2 4 20 35 SP2000SC P20C 180 220 120 800 2.2 4 20 35 SP2500SC P25C 230 290 120 800 2.2 4 30 85 mA min mA max A max V max pF min pF min ■ Surge Ratings Series IPP ITSM 50/60 Hz di/dt0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A 20 150 150 90 50 75 75 45 75 20 500 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 30 500 A min A min A min A min A min Amps/µs maxA min A min A min A min A min Notes:

1 Current waveform in µs

2 Voltage waveform in µs

  • Peak pulse current rating (IPP ) is repetitive and guaranteed for the life of the product. - IPP - The device must initially be in thermal equilibrium with -40°C < TJ < Protection Thyristor SP1200SA ~ SP2500SC
  • HF ROHS Asymmetrical Discrete Series- DO-214 2.00

www.kexin.com.cn2 Thyris tors ■ Typical Characterisitics 25°C Case Temperature (TC ) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature IH IT IS IDRM VDRMVT +V-V VS 100 tr td Peak Value Half Value t – Time (µs) IPP – Peak Pulse Current – %IPP tr = rise time to peak value td = decay time to half value Waveform = tr x td V-I Characteristics tr x t d Pulse Waveform -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (T J) – °C Percent of V S Change – % 25 °C Time erutarep meT TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to T P Figure 1 Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (T s(min) ) - Temperature Max (Ts(max) ) - Time (Min to Max) (ts ) 60-180 secs. Average ramp up rate (Liquidus Temp (T L) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL ) (Liquidus) - Temperature (t L ) 60-150 secs. Peak Temp (TP ) Time within 5°C of actual Peak Temp (t p ) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed Protection Thyristor SP1200SA ~ SP2500SC