SP1112-01UTG

SP11XX LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

Features

• ESD, IEC 61000-4-2, ±30kV contact, ±30kV air
• EFT , IEC 61000-4-4, 40A (5/50ns)
• Lightning, IEC 61000- 4-5 2nd edition, 80A (tP=8/20μs, SP1105S)
• Low clamping voltage
• Low leakage current
• Moisture Sensitivity Level(MSL -1)
• Lead free and RoHS compliant
• AEC-Q101 qualified
• Switches / Buttons
• Test Equipment / Instrumentation
• Point-of-Sale Terminals
• Medical Equipment
• Notebooks / Desktops / Servers
• Computer Peripherals
• Automotive Electronics Pinout and Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. RoHS Pb GREENSP11xx Series Discrete Unidirectional TVS Diode Pin 1 Pin 2

TVS Diode Array (SPA ® Diodes) General Purpose Surge Protection - SP11xx Series © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/24/20 CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR≤1μA - - 5.0 V Reverse Voltage Drop VR IR=1mA 6.0 - - V Leakage Current ILEAK VR=5V - - 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd - 7. 3 - V IPP=70A, tP=8/20μs, Fwd - 10.9 - V Dynamic Resistance2 RDYN TLP , tP=100ns, I/O to GND - 0.05 - Ω Peak Pulse Current Ipp tp=8/20µs - - 70 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Diode Capacitance1 CD Reverse Bias=0V , f=1MHz - 630 - pF Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR≤1μA - - 5.0 V Reverse Voltage Drop VR IR=1mA 6.0 - 7. 5 V Leakage Current ILEAK VR=5V - - 1. 0 μA Clamp Voltage1 VC IPP=40A, tp=8/20µs, Fwd - 8.3 - V IPP=80A, tP=8/20μs, Fwd - 9.2 - V Dynamic Resistance2 RDYN TLP , tP=100ns, I/O to GND - 0.05 - Ω Peak Pulse Current Ipp tp=8/20µs - - 80 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Diode Capacitance1 CD Reverse Bias=0V , f=1MHz - 630 - pF Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR≤1μA - - 12.0 V Reverse Voltage Drop VR IR=1mA 13.3 - - V Leakage Current ILEAK VR=12V - - 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd - 15.2 - V IPP=40A, tP=8/20μs, Fwd - 26.5 - V Dynamic Resistance2 RDYN TLP , tP=100ns, I/O to GND - 0.05 - Ω Peak Pulse Current Ipp tp=8/20µs - - 40.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Diode Capacitance1 CD-GND Reverse Bias=0V , f=1MHz - 230 - pF

TVS Diode Array (SPA ® Diodes) General Purpose Surge Protection - SP11xx Series © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/24/20 Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR≤1μA - - 15.0 V Reverse Voltage Drop VR IR=1mA 16.7 - - V Leakage Current ILEAK VR=15V - - 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd - 19.3 - V IPP=30A, tp=8/20µs, Fwd - 30.2 - V Dynamic Resistance2 RDYN TLP , tP=100ns, I/O to GND - 0.05 - Ω Peak Pulse Current Ipp tp=8/20µs - - 30.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Diode Capacitance1 CI/O-GND Reverse Bias=0V , f=1MHz - 180 - pF Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR≤1μA - - 24.0 V Reverse Voltage Drop VR IR=1mA 26.7 - - V Leakage Current ILEAK VR=24V - - 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd - 29.8 - V IPP=20A, tp=8/20µs, Fwd - 44.7 - V Dynamic Resistance2 RDYN TLP , tP=100ns, I/O to GND - 0.1 - Ω Peak Pulse Current Ipp tp=8/20µs - - 20.0 A ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 - - kV IEC 61000-4-2 (Air Discharge) ±30 - - kV Diode Capacitance1 CI/O-GND Reverse Bias=0V , f=1MHz - 130 - pF Note: 1. Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns

TVS Diode Array (SPA ® Diodes) General Purpose Surge Protection - SP11xx Series © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/24/20 Capacitance vs. Bias Capacitance (pF) Bias Voltage (V) 100 200 300 400 500 600 024681 01 21 41 61 82 02 22 4 SP1105(S) SP1112 SP1115 SP1124 SP1105 Clamp Voltage (VC ) Peak Pulse Current - IPP (A) 0.0 2.0 4.0 6.0 8.0 10.0 12.0 40 45 50 55 60 65 70 75 80 SP1105S SP1112 SP1115 SP1124 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 10 15 20 25 30 35 40 Clamp Voltage (VC) Peak Pulse Current - IPP (A) SP1105, SP1105S Clamping voltage vs. IPP for 8/20μs waveshape SP1112, SP1115, SP1124 Clamping voltage vs. IPP for 8/20μs waveshape 8/20μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP T ransmission Line Pulsing (TLP) Plot 05 10 15 20 25 30 35 40 TLP Voltage (V) TLP Current (A) SP1105(S) SP1112 SP1115 SP1124

TVS Diode Array (SPA ® Diodes) General Purpose Surge Protection - SP11xx Series © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/24/20 SP1105 IEC 61000 -4-2 +8 kV Contact ESD Clamping Voltage SP1105 IEC 61000 -4-2 -8 kV Contact ESD Clamping Voltage SP1105S IEC 61000 -4-2 +8 kV Contact ESD Clamping Voltage SP1105S IEC 61000 -4-2 -8 kV Contact ESD Clamping Voltage SP1112 IEC 61000 -4-2 +8 kV Contact ESD Clamping Voltage SP1112 IEC 61000 -4-2 -8 kV Contact ESD Clamping Voltage

TVS Diode Array (SPA ® Diodes) General Purpose Surge Protection - SP11xx Series © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/24/20 Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - T emperature Min (Ts(min)) 150°C - T emperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) T emp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - T emperature (TL) (Liquidus) 217°C - T emperature (tL) 60 – 150 seconds Peak T emperature (TP) 260+0/-5 °C Time within 5°C of actual peak T emperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak T emperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters SP1115 IEC 61000 -4-2 +8 kV Contact ESD Clamping Voltage SP1115 IEC 61000 -4-2 -8 kV Contact ESD Clamping Voltage SP1124 IEC 61000 -4-2 +8 kV Contact ESD Clamping Voltage SP1124 IEC 61000 -4-2 -8 kV Contact ESD Clamping Voltage

TVS Diode Array (SPA ® Diodes) General Purpose Surge Protection - SP11xx Series © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/24/20

Ordering Information

Part Number Package Marking Min. Order Qty. SP1105-01UTG 1 .6x1 .0mm DFN AAKx 3000 SP1112-01UTG 1 .6x1 .0mm DFN ABKx 3000 SP1115-01UTG 1 .6x1 .0mm DFN ACKx 3000 SP1124-01UTG 1 .6x1 .0mm DFN ADKx 3000 SP1105S-01UTG 1 .6x1 .0mm DFN AEKx 3000 Package Dimensions D E L e b h h A Top View Bottom View Side View 1 2 1 2 Pin1 Recommended Soldering pad layout (mm) 1.00 0.58 1.70 0.58 Symbol 1.6x1.0mm DFN Millimeters Min Nor Max A 0.45 0.50 0.55 A1 - 0.02 0.05 D 1 .55 1 .60 1 .65 E 0.95 1 .00 1 .05 b 0.75 0.80 0.85 L 0.35 0.40 0.45 e 1 .10 BSC h 0.15 0.20 0.25 Part Numbering SystemPart Marking System 11 ** 01 T G Voltage Number of Channels Package T= Tape & Reel G= Green U: 1.6x1.0mm DFN USP TVS Diode Arrays (SPA Diodes) xx K x Date code Assembly sitePart code AA = SP1105-01UTG AB = SP1112-01UTG AC = SP1115-01UTG AD = SP1124-01UTG AE = SP1105S-01UTG Part code : PIN1 Embossed Carrier T ape & Reel Specification Symbol Millimeters A0 1 .14 +/- 0.03 B0 1 .75 +/- 0.03 K0 0.67 +/- 0.05 F 3.50 +/- 0.05 P1 2.00 +/- 0.10 W 8.00 +/- 0.10 ,Ref. ,Ref. ,Ref. W AO P1 0.50 ±0.05 Do 1.50 0.10 0.00 2.00 0.05(I) PO 4.00 0.1(II) F(III) 1.75 0.1 Y Y X X BO KO T 0.20 0.02 SECTION Y-Y REF 3° SECTION X-X User Feeding Direction Pin 1 Location W AO P1 0.50 ±0.05 Do 1.50 0.10 0.00 2.00 0.05(I) PO 4.00 0.1(II) F(III) 1.75 0.1 Y Y X X BO KO T 0.20 0.02 SECTION Y-Y REF 3° SECTION X-X User Feeding Direction Pin 1 Location W AO P1 0.50 ±0.05 Do 1.50 0.10 0.00 2.00 0.05(I) PO 4.00 0.1(II) F(III) 1.75 0.1 Y Y X X BO KO T 0.20 0.02 SECTION Y-Y REF 3° SECTION X-X User Feeding Direction Pin 1 Location Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.