SP1004-04VTG

SP1004-04VTG

Littelfuse

Analog video ports typically have signals that swing above and below GND

SP1004-04VTG LITTELFUSE | Alldatasheet

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 1

Analog video ports typically have signals that swing above and below GND (i.e. ±2V) → A bidirectional protection device should be used as these devices will not clip the analog signal
S-Video, Composite, and RF/Coaxial are a few of the common low-speed analog video signals in use today →Typical bus speeds will not exceed 5MHz so capacitance is not much of a concern → Protection of the three are shown below (Y, C, Video, and RF) Application Schematic: Recommended SPA Devices: Ordering Number ESD Level (Contact) Lightning (tP=8/20μs) I/O Capacitance # of Channels VRWM Packaging SP1004-04VTG ±8kV 2A 5pF 4 6V SOT953 SP1002-01JTG ±8kV 2A 5pF 1 6V SC70-3 SP1002-02JTG ±8kV 2A 5pF 2 6V SC70-5 Video ADC Outside World Y Case GND Video Port C Chrominance Luminance Composite IC Video RF Coaxial Case GND SP1004

Summary

Analog video ports typically have signals that swing above and below GND

Description

Analog video ports typically have signals that swing above and below GND

Source title SP1004-04VTG Datasheet(PDF) - Littelfuse