SP0201U-ULC-01UTG LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • 0.13pF MAX bidirectional
  • 0.25pF MAX unidirectional
  • ESD, IEC61000-4-2, ±20kV contact, ±20kV air
  • Low clamping voltage of 10V @ IPP=2A (Bidirectional) (tP=8/20μs)
  • Low profile 0201 and

0402 DFN packages

  • Facilitates excellent signal integrity
  • AEC-Q101 Qualified
  • ELV Compliant
  • Halogen free, Lead free and RoHS compliant

Ultra Low Capacitance Discrete TVS Series © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/19 CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 2.0 A TOP Operating Temperature -30 to 85 °C TSTOR Storage Temperature -55 to 150 °C Thermal Information Parameter Rating Units Storage Temperature Range -55 to 150 °C Maximum Junction Temperature 150 °C Maximum Lead Temperature (Soldering 20-40s) 260 °C Unidirectional Electrical Characteristics - (TOP=25°C) Parameter T est Conditions Min Ty p Max Units Input Capacitance @ VR = 0V , f = 3GHz 0.20 0.25 pF Breakdown Voltage VBR @ IT=1mA 9.00 V Reverse Working Voltage 7. 0 V Reverse Leakage Current IL @ VRWM=5.0V 25 50 nA Clamping Voltage VCL @ IPP=2.0A 9.20 V ESD Withstand Voltage IEC61000-4-2 (Contact) ±20 kV IEC61000-4-2 (Air) ±20 Bidirectional Electrical Characteristics - (TOP=25°C) Parameter T est Conditions Min Ty p Max Units Input Capacitance @ VR = 0V , f = 3GHz 0.10 0.13 pF Breakdown Voltage VBR @ IT=1mA 9.80 V Reverse Working Voltage -7 .0 7. 0 V Reverse Leakage Current IL @ VRWM=5.0V 25 50 nA Clamping Voltage VCL @ IPP=2.0A 10.0 V ESD Withstand Voltage IEC61000-4-2 (Contact) ±20 kV IEC61000-4-2 (Air) ±20 Insertion Loss Diagram - Unidirectional Frequency (Hz) 1.E+09 -20.0 S21 Insertion Loss (dB) -10.0 -5.0 -15.0 -25.0 -30.0 Insertion Loss Diagram - Bidirectional Frequency (Hz) 1.E+09 -20.0 S21 Insertion Loss (dB) -10.0 -5.0 -15.0 -25.0 -30.0 Ultra Low Capactance Discrete TVS series

Ultra Low Capacitance Discrete TVS Series © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/19 Device IV Curve - Unidirectional -2 -1 01 2 34 56 78 Cur rent (mA) Voltage (V) 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 91 0 Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - T emperature Min (Ts(min)) 150°C - T emperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) T emp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - T emperature (TL) (Liquidus) 217°C - T emperature (tL) 60 – 150 seconds Peak T emperature (TP) 260+0/-5 °C Time within 5°C of actual peak T emperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak T emperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Device IV Curve - Bidirectional -10- 8- 6- 4 -2 02 46 8 Cur rent (mA) Voltage (V) 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 Product Characteristics of 0402 DFN Package Lead Plating Pre-Plated Frame Lead Material Copper Alloy Lead Coplanarity 0.004 inches(0.102mm) Substrate material Silicon Body Material Molded Epoxy Flammability UL 94 V-0 Notes : 1. All dimensions are in millimeters 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 5. Package surface matte finish VDI 11-13. Without Component With Component

5.0 Gb/s, 1000mV differential, CPO Compliant Test Pattern

USB3.0 Eye Diagram

Ultra Low Capacitance Discrete TVS Series © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/19 Package Dimensions — 0201 DFN Symbol Millimeters Inches Min Max Min Max A 0.23 0.33 0.009 0.013 A1 0.00 0.05 0.000 0.002 A3 0.100 ref. 0.004 ref. b 0.2 0.3 0.008 0.012 D 0.55 0.65 0.022 0.026 E 0.25 0.35 0.010 0.014 e 0.35-0.40 BSC 0.014-0.016 BSC L1 0.12 0.23 0.005 0.009 L2 0.12 0.24 0.005 0.009 K 0.17 BSC 0.007 BSC M 0.32 0.013 N 0.24 0.009 P 0.14 0.006 TOP VIEW BOTTOM VIEW SIDE VIEW SIDE VIEW SOLDERING PATTERN TOP VIEW END VIEW-1 END VIEW-2 SIDE VIEW-1 BOTTOM VIEW-1 BOTTOM VIEW-2 SIDE VIEW-2 SOLDERING PATTERN Package Dimensions — 0402 DFN Symbol Millimeters Inches Min Ty p Max Min Ty p Max A 0.33 - 0.55 0.013 - 0.022 A1 0 - 0.05 0.000 - 0.002 A3 0.13REF 0.005REF e 0.65BSC 0.026BSC TOP VIEW END VIEW-1 END VIEW-2 SIDE VIEW-1 BOTTOM VIEW-1 BOTTOM VIEW-2 SIDE VIEW-2 SOLDERING PATTERN

Ultra Low Capacitance Discrete TVS Series © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/19 Embossed Carrier T ape & Reel Specification — 0402 DFN Embossed Carrier T ape & Reel Specification — 0201 DFN Part Numbering System Part Marking System X ULCxxxx Size 0201 Directional U: Unidirectional B: Bidirectional 0402 Ultra LC SP TVS Diode Arrays (SPA Diodes) – 01 X T G Package T= Tape & Reel G= Green U: 0201 DFN Number of Channels E: 0402 DFN C C

Ordering Information

Part Number Package Marking Reel Quantity SP0201U-ULC-01UTG 0201 DFN I C 15000 SP0201B-ULC-01UTG 0201 DFN C 15000 SP0402U-ULC-01ETG 0402 DFN I C 10000 SP0402B-ULC-01ETG 0402 DFN C 10000 Unidirectional Bidirectional C C T W P0 P2 D0 F T W P0 P2 D0 F Symbol Millimeters A0 0.33 min/0.41 max B0 0.63 min/0.71 max D0 ø 1 .50 +0.10/ -0 D1 ø 0.20 +/- 0.05 E1 1 .75+/-0.10 F 3.50+/-0.05 K0 0.30 min/0.39 max P0 4.00+/-0.10 P1 2.00+/-0.10 P2 2.00+/-0.05 W 8.00+0.30/-0.10 T 0.13 min/0.25 max Symbol Millimeters A0 0.70+/-0.05 B0 1 .15+/-0.05 D0 ø 1 .50+/-0.10 D1 ø 0.40 +/-0.10 E1 1 .75+/-0.10 F 3.50+/-0.10 K0 0.55+/-0.05 P0 4.00+/-0.10 P1 2.00+/-0.10 P2 2.00+/-0.05 W 8.00+0.30/-0.10 T 0.20+/-0.05 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own