SP03-3-3 LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Applications
This new broadband protection component from Littelfuse provides overvoltage protection for applications such as 10/100/1000 BaseT Ethernet, T3/E3 DS3 interfaces, ADSL2+, and VDSL2+. This new protector combines the TVS diode element with a diode rectifier bridge to provide both longitudinal and differential protection in one package. This design innovation results in a capacitive loading characteristic that is log-linear with respect to the signal voltage across the device. This reduces intermodulation (IM) distortion caused by a typical solid-state protection solution. The application schematic provides the connection information. Pinout Functional Block Diagram Agency Approvals Agency Agency File Number E128662
- RoHS compliant
- SOIC-8 surface mount package (JEDEC MS-012)
- Low insertion loss, log- linear capacitance
- Combined longitudinal and metallic protection
- IEC 61000-4-5, 2nd edition: 8/20 surge, 150A surge immunity
- Clamping speed of nanoseconds
- UL 94V-0 epoxy molding
- UL Recognized epoxy meeting flammability rating V-0
- Low clamping voltage
- Lead-free
- T1/E1 Line cards
- T3/E3 and DS3 Interfaces
- STS-1 Interfaces
- 10/100/1000 BaseT Ethernet SOIC-8 (Top View) Pin 1 and 8 Pin 4 and 5 Pin 2, 3, 6, and 7 Line out Line outLine in Line in Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. RoHS Pb GREEN Application Example This schematic shows a high-speed data interface protection solution. The SP03-3.3 provides both metallic (differential) and longitudinal (common mode) protection from lightning induced surge events. Its surge rating is compatible with the intra-building surge requirements of Telcordia’s GR-1089-CORE, and the Basic Level Recommendations of ITU K.20 and .21 . This component protects against both positive and negative induced surge events. The TeleLink fuse provides overcurrent protection for the long term 50/60 Hz power fault events. to chipset (Ethernet PHY, T3/E3 PHY, etc.) RING TIP TeleLink (0461 1.25) SP03-3.3 SP03-3.3 Series 3.3V 150A Diode Array Additional Information SamplesResources
© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/09/17 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection - SP03-3.3 Series Absolute Maximum Ratings Parameter Rating Units Peak Pulse Current (8/20µs) 150 A Peak Pulse Power (8/20µs) 3300 W IEC 61000-4-2, Contact Discharge, (Level 4) 30 kV IEC 61000-4-2, Air Discharge, (Level 4) 30 kV IEC 61000-4-5, 2 edition (8/20µs) 150 A Telcordia GR 1089 (Intra-Building) (2/10µs) 100 A ITU K.20 (5/310µs) 40 A Electrical Characteristics (TOP = 25°C) Thermal Information Parameter Rating Units Operating Temperature Range –40 to 125 °C Storage Temperature Range –55 to 150 °C Maximum Junction Temperature 150 °C Maximum Lead Temperature (Soldering 20-40s) (SOIC - Lead Tips Only) 260 °C Parameter Symbol Test Conditions Min Typ Max Units Reverse Stand-Off Voltage VRWM - - - 3.3 V Reverse Breakdown Voltage VBR IT= 2µA 3.3 - - V Reverse Breakdown Voltage VBR IT= 50µA 3.3 - - V Reverse Leakage Current IR VRWM= 3.3V , T= 25°C - - 1 µA Clamping Voltage, Line-Ground VC IPP= 50A, tp=8/20 µs - - 11. 5 V Clamping Voltage, Line-Ground VC IPP= 100A, tp=8/20 µs - - 15 V Clamping Voltage, Line-Line VC IPP= 50A, tp=8/20 µs - - 13.5 V Clamping Voltage, Line-Line VC IPP= 100A, tp=8/20 µs - - 18 V Junction Capacitance Cj Between I/O Pins and Ground VR=0V , f= 1MHz - 16 25 pF Between I/O Pins VR=0V , f= 1MHz - 8 12 pF CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Figure 2: Current Derating CurveFigure 1: Non-repetitive Peak Pulse Current vs. Pulse Time Pulse decay time (µs) 100 1000 11 01 00 1000 Peak Pulse Cur rent (A) Per centage of Rat ed Cur rent (%I Ambient Temperature (C) 100 120 02 04 06 08 01 00 1201 40 160
© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/09/17 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection - SP03-3.3 Series Part Numbering System
Ordering Information
Part Number Package Marking Min. Order Qty. SP03-3.3BTG SOIC-8 Tape & Reel SP03-3.3 2500 SP 03 3.3 B T G Series Working Voltage Package T= Tape & Reel G= Green B = SOIC TVS Diode Arrays (SPA® Diodes) Part Marking System Package Dimensions — Mechanical Drawings and Recommended Solder Pad Outline Package SOIC-8 Pins 8 JEDEC MS-012 Millimetres Inches Min Max Min Max A 1 .35 1 .75 0.053 0.069 A1 0.10 0.25 0.004 0.010 A2 1 .25 1 .65 0.050 0.065 B 0.31 0.51 0.012 0.020 c 0.17 0.25 0.007 0.010 D 4.80 5.00 0.189 0.197 E 5.80 6.20 0.228 0.244 E1 3.80 4.00 0.150 0.157 e 1 .27 BSC 0.050 BSC L 0.40 1 .27 0.016 0.050 o Recommended Soldering Pad Outline (Reference Only) FL First Line: Part number Second Line: Date code FLSP03-3.3 XXXXXXXX Embossed Carrier T ape & Reel Specification — SOIC Package Millimetres Inches Min Max Min Max E 1 .65 1 .85 0.065 0.073 F 5.4 5.6 0.213 0.22 P2 1 .95 2.05 0.077 0.081 D 1. 5 1. 6 0.059 0.063 D1 1 .50 Min 0.059 Min P0 3.9 4.1 0.154 0.161 10P0 40.0 ± 0.20 1 .57 4 ± 0.008 W 11. 9 12.1 0.468 0.476 P 7. 9 8.1 0.311 0.319 A0 6.3 6.5 0.248 0.256 B0 5.1 5.3 0.2 0.209 K0 2 2.2 0.079 0.087 t 0.30 ± 0.05 0.012 ± 0.002 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. User Feeding Direction Pin 1 Location