SP0201U-ELC-01UTG LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • 0.15 pF TYP bidirectional
  • 0.30 pF TYP unidirectional
  • ESD, IEC 61000-4-2, ±22kV contact, ±22kV air
  • Low clamping voltage of 14V @ I PP=2.5A (Bidirectional) (tP=8/20μs)
  • Low profile 0201 and

0402 DFN packages

  • Facilitates excellent signal integrity
  • ELV Compliant
  • Halogen free, Lead free and RoHS compliant Bottom View

0402 DFN0201DFN

Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.

©2016 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 06/12/17 Enhanced ESD Discrete TVS Series CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 2.5 A TOP Operating Temperature -30 to 85 °C TSTOR Storage Temperature -55 to 150 °C Uidirectional Electrical Characteristics - (TOP=25°C) Parameter Test Conditions Min Typ Max Units Input Capacitance @ VR = 0V , f = 3GHz 0.30 pF Breakdown Voltage VBR @ IT=1mA 8.80 V Reverse Working Voltage 7. 0 V Reverse Leakage Current IL @ VRWM=5.0V 25 nA Clamping Voltage VCL @ IPP=2.5A 13.0 V ESD Withstand Voltage IEC 61000-4-2 (Contact) ±22 kV IEC 61000-4-2 (Air) ±22 Bidirectional Electrical Characteristics - (TOP=25°C) Parameter Test Conditions Min Typ Max Units Input Capacitance @ VR = 0V , f = 3GHz 0.15 pF Breakdown Voltage VBR @ IT=1mA ± 9.6 V Clamping Voltage VCL @ IPP=2.5A ± 14.0 V ESD Withstand Voltage IEC 61000-4-2 (Contact) ±22 kV IEC 61000-4-2 (Air) ±22 Insertion Loss Diagram - Unidirectional Frequency (Hz) 1.E+09 -20.0 S21 Insertion Loss (dB) -10.0 -5.0 -15.0 -25.0 -30.0 Insertion Loss Diagram - Bidirectional Frequency (Hz) 1.E+09 S21 Insertion Loss (dB) -30.0 -20.0 -10.0 -5.0 -15.0 -25.0

©2016 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA® Diodes) Revision: 06/12/17 Enhanced ESD Discrete TVS Series SP1013 Device IV Curve - Unidirectional -2 -1 01 2 34 56 78 Cur rent (mA) Voltage (V) 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 91 0 Device IV Curve - Bidirectional -10- 8- 6- 4 -2 02 46 8 Cur rent (mA) Voltage (V) 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Product Characteristics of 0402 DFN Package Lead Plating Pre-Plated Frame Lead Material Copper Alloy Lead Coplanarity 0.004 inches(0.102mm) Substrate material Silicon Body Material Molded Epoxy Flammability UL Recognized epoxy meeting flammability rating V-0. Notes : 1 . All dimensions are in millimeters 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 5. Package surface matte finish VDI 11-13. USB3.0 Eye Diagram Without Device With Device

5.0 Gb/s, 1000mV differential, CPO Compliant Test Pattern

©2016 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 06/12/17 Enhanced ESD Discrete TVS Series Package Dimensions — 0201 DFN TOP VIEW BOTTOM VIEW SIDE VIEW SIDE VIEW SOLDERING PATTERN TOP VIEW END VIEW-1 END VIEW-2 SIDE VIEW-1 BOTTOM VIEW-1 BOTTOM VIEW-2 SIDE VIEW-2 SOLDERING PATTERN Package Dimensions — 0402 DFN Symbol Millimeters Inches Min Typ Max Min Typ Max A 0.33 - 0.55 0.013 - 0.022 A1 0 - 0.05 0.000 - 0.002 A3 0.13REF 0.005REF e 0.65BSC 0.026BSC TOP VIEW END VIEW-1 END VIEW-2 SIDE VIEW-1 BOTTOM VIEW-1 BOTTOM VIEW-2 SIDE VIEW-2 SOLDERING PATTERN Symbol Millimeters Inches Min Max Min Max A 0.23 0.33 0.009 0.013 A1 0.00 0.05 0.000 0.002 A3 0.100 ref. 0.004 ref. b 0.2 0.3 0.008 0.012 D 0.55 0.65 0.022 0.026 E 0.25 0.35 0.010 0.014 e 0.35-0.40 BSC 0.014-0.016 BSC L1 0.12 0.23 0.005 0.009 L2 0.12 0.24 0.005 0.009 K 0.17 BSC 0.007 BSC

©2016 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA® Diodes) Revision: 06/12/17 Enhanced ESD Discrete TVS Series SP1013 Embossed Carrier T ape & Reel Specification — 0402 DFN Embossed Carrier T ape & Reel Specification — 0201 DFN Part Numbering System Part Marking System D D

Ordering Information

Unidirectional Bidirectional D D Part Number Package Marking Reel Quantity SP0201U-ELC-01UTG 0201 DFN I D 15000 SP0201B-ELC-01UTG 0201 DFN D 15000 SP0402U-ELC-01ETG 0402 DFN I D 10000 SP0402B-ELC-01ETG 0402 DFN D 10000 T W P0 P2 D0 F T W P0 P2 D0 F X ELCxxxx Size 0201 Directional U: Unidirectional B: Bidirectional 0402 Surge SP TVS Diode Arrays (SPA Diodes) – 01 X T G Package T= Tape & Reel G= Green U: 0201 DFN Number of Channels E: 0402 DFN Symbol Millimeters A0 0.33 min/0.41 max B0 0.63 min/0.71 max D0 ø 1 .50 +0.10/ -0 D1 ø 0.20 +/- 0.05 E1 1 .75+/-0.10 F 3.50+/-0.05 K0 0.30 min/0.39 max P0 4.00+/-0.10 P1 2.00+/-0.10 P2 2.00+/-0.05 W 8.00+0.30/-0.10 T 0.13 min/0.25 max Symbol Millimeters A0 0.70+/-0.05 B0 1 .15+/-0.05 D0 ø 1 .50+/-0.10 D1 ø 0.40 +/-0.10 E1 1 .75+/-0.10 F 3.50+/-0.10 K0 0.55+/-0.05 P0 4.00+/-0.10 P1 2.00+/-0.10 P2 2.00+/-0.05 W 8.00+0.30/-0.10 T 0.20+/-0.05