SMT50GW HY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

  • Low forward voltage drop
  • High current capability RoHS
  • High reliability COMPLIANT
  • Meet UL flammability classification 94V-0 Mechanical Data
  • Case: Epoxy case with heat sink
  • Polarity: Symbol marked on body
  • Mounting position:
  • Mounting torque: 2 N.m Note: Products with logo or are made by HY Electronic (Cayman) Limited.

Applications

  • For use in high power supply inverters,servo motor and welding machine applications Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Repetitive Peak Reverse Voltage VRRM V Maximum RMS Voltage VRMS V Maximum DC Blocking Voltage VDC V Peak Non-Repetitive Reverse Voltage VRSM V Maximum Average Forward Rectified Current @T C=55 ℃ I(AV) A Peak Forward Surge Current, 8.3mS Single Half Sine-Wave, Superimposed on Rated Load (JEDEC Method) I2t Rating for Fusing (t<8.3mS) I2 t A2 S Peak Forward Voltage per Diode at 25A DC VF V Maximum DC Reverse Current at Rated @TJ=25℃ μA DC Blocking Voltage per Diode @TJ=150℃ mA RMS lsolation Voltage from Case to Lead VISO V Operating Junction Temperature Range TJ ℃ Storage Temperature Range TSTG ℃ Rev. 11, 18-May-2020 www.hygroup.com.tw Glass Passivated 3 Phase Bridge Rectifiers 400 2500 -55 to +150 560 700 840 980 1120 800 1000 1200 1400 1600 -08GW -55 to +125 1700 800 1000 1200 1400 1600 Characteristics Symbol IFSM IR Unit A 664 1.1 900 1100 1300 1500 -10GW -12GW -14GW -16GW SMT50 SMT50 SMT50 SMT50 SMT50 SMT50GW SERIES Reverse Voltage - 800 to 1600Volts Forward Current - 50 Amperes Package Outline Dimensions in Inches (Millimeters) Pb All d ata sheet.com

Rating and Characteristic Curves SMT50GW SERIES The curve above is for reference only. Rev. 11, 18-May-2020 0.1 TJ=25°C TJ=75°C TJ=100°C TJ=125°C Pulse Width 300uS 2%Duty Cycle Fig. 4 - Typical Forward Characteristics I nstantaneous Forward Current (A) Instantaneous Forward Voltage (V) I nstantaneous Reverse Current (mA) Fig. 3 - Typical Reverse Characteristics 100 1000 20 40 60 80 100 TJ=25°C TJ=75°C TJ=100°C TJ=125°C Percent of Rated Peak Reverse Voltage (%) Case Temperature (℃) 0 50 100 150 200 Fig. 1 - Forward Current Derating Curve A verage Forward Current (A) 100 150 200 250 300 350 400 450 1 10 100 Pe ak Forward Surge Current (A) 8.3mS Single Half-Sine-Wave (JEDEC METOD) Fig. 2 - Maximum Non-Repetitive Surge Current Number of Cycles at 60Hz TJ=150°C 2000 All d ata sheet.com

ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require- ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi- lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet- ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers- onnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of HY. Product names and markings noted herein may be trademarks of their respective owners. Rev. 11, 18-May-2020 Disclaimer All d ata sheet.com