SMT40C2

SMT40C2 ADVANCEDENERGY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

©2021 Advanced Energy Industries, Inc. ARTESYN SIL/SMT40C2 SERIES C-Class Non-Isolated Total Power:

40 Amps

Input Voltage: 4.5 to 13.8 VDC # of Outputs: Single AT A GLANCEAdvanced Energy's Artesyn SIL40C2 and SMT40C2 series of 40 amp non-isolated DC-DC converters are designed for cost- and space-sensitive applications. Both converters accept a wide range 4.5 to 13.8 VDC input and provide an output that is adjustable from 0.6 to 5.0 VDC to accommodate a wide variety of silicon power needs. Rated at 200 watts, the converters are capable of delivering up to 40 amps and have a typical efficiency of 94%. Standard features include remote sense, remote On/Off and remote ‘power good’ indication. These converters also support current sharing – multiple modules can be connected in parallel. SPECIAL FEATURES  40 A current rating  Input voltage range: 4.5 - 13.8 VDC  Output voltage: 0.6 to 5 V  Industry-leading value  Cost optimized design  Excellent transient response  Output enable  Output voltage adjustability  Supports silicon voltage migration  Reduced design-in and qual time  RoHS compliant SAFETY  UL, cUL CAN/CSA 22.2 No. E139421 UL6950 File No. TBD  TÜV Product Service (EN60950)  Certificate No. TBD  CB report and certificate to IEC60950

2 advancedenergy.com SIL/SMT40C2 ELECTRICAL SPECIFICATIONS Input Input voltage ra nge 4.5 - 13.8 VDC Input current Minimum load Remote OFF 50 mA 5 mA Input current (max.) See Note 3 25 A @ lo max. Start-up time Remote ON/OFF 3 ms Output Output voltage See Note 5 0.6 - 5 V Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min./max. load 0 A/40 A Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. Ripple and noise

5 Hz to 20 MHz

Vin = 5 V, Vout = 2.5 V Transient response See Note 1, 2 130 mV max. deviation 50 μs recovery to within regulation band General Efficiency (high input) Vin = 5 V, Vo = 2.5 V, lo = 20 A 94% Switching frequency Fixed 500 kHz Material flammability UL94V-0 Weight 17 g (0.06 oz.) MTBF 12 V @ 40 °C, 100% load Bellcore 332 6,749,409 hours Coplanarity Surface mount models 150 μm

advancedenergy.com 3 SIL/SMT40C2 Thermal performance Operating ambient temperature -0 °C to +70 °C See Note 5 Non-operating temperature -40 °C to +125 °C Protection Short-circuit Hiccup, non-latching Overvoltage protection Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 μF Output See Note 7 0 μF ENVIRONMENTAL SPECIFICATIONS

ORDERING INFORMATION

PART NUMBER SYSTEM WITH OPTIONS Product Family Rated Output Current Performance Generation Input Voltage Output Voltage Mounting Option RoHS Compliance SXX 40 C 2 - 00 SADJ - V J SIL = Single In Line SMT = Surface Mount 06 = 6 Amp 15 = 15 Amp 20 = 20 Amp 30 = 30 Amp 40 = 40 Amp C = Cost Optimized Blank = Standard 2 = Increased current density 00 = 4.5 - 13.8 V Single Adjustable Output V = Vertical H = Horizontal (Applicable to SIL version only) J = Pb free (RoHS 6/6 compliant) Model Number (3,5) Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load

4 advancedenergy.com SIL/SMT40C2 OUTPUT VOLTAGE ADJUSTMENT STANDARD APPLICATION DRAWING The ultra-wide output voltage trim range offers major advantages to users who select the SIL40C2 series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.6-5 V. When the SIL40C2 converter leaves the factory, the output has been adjusted to the default voltage of 0.6 V. Notes: 1. Measured as per recommended system capacitance. 2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.75 lo to full lo and full lo to 0.75. 3. External input fusing is recommended. 4. Additional part numbers may be available with different output voltages. 5. Airflow dependent, 100 LFM minimum required. 6. No capacitors needed for ripple current stability. 7. No capacitors needed for stability. 8. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Power representative or use the on-line model number search tool at http://www.artesyn.com to find a suitable alternative. 9. To order a Horizontal Mounting option with a pin length of 0.165”, please use model SIL40C2-00S-HP5.

advancedenergy.com 5 SIL/SMT40C2 MECHANICAL DRAWINGS Vertical Mount Horizontal Mount

6 advancedenergy.com SIL/SMT40C2 Surface Mount MECHANICAL DRAWINGS (CONTINUED) Pin Assignments Pin Function

1 Vout

2 Vout

3 Vout

4 Trim

5 Enable

6 Power Good

7 Ground

8 Ground

9 (+) Sense

10 Vin

11 Vin

12 Mech Pin (Horz/SMT only)

13 Mech Pin (Horz/SMT only)

ENG-SIL/SMT40C2-235-01 9.03 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.