SMT30E ADVANCEDENERGY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
©2021 Advanced Energy Industries, Inc. ARTESYN SMT30E SERiES E-Class Non-Isolated Total Power:
99 Watts
input Voltage: 8 - 14 Vdc # of Outputs: Single DATA SHEETAdvanced Energy's Artesyn SMT30E series non-isolated DC-DC converter accepts an 8 to 14 Vdc input and produces an output that can be trimmed over a very wide 0.8 to 3.63 Vdc range to satisfy a broad diversity of semiconductor power needs. Rated at 99 watts, the converter has a typical efficiency of 91% and can deliver up to 30 amps. Standard features include remote On/Off, remote sense and comprehensive protection against short-circuit and overtemperature conditions. Packaged as a low profile surface-mount module, it has a 0.53 x 1.3 inch (13.5 x 33 mm) footprint and an installed height of only 0.32 inch (8.2 mm). SPECiAL FEATURES 30 A current rating Input voltage range: 8 - 14Vdc Output voltage range: 0.8 - 3.63 V Ultra high efficiency: 91% @ 12 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >3.2 million hours per Telcordia SR-332 Ideal solution where board space is at a premium or tighter card pitch is required Industry standard surface-mount footprint RoHS compliant Two year warranty SAFETY UL, cUL CAN/CSA 22.2 No. EI74104 UL 60950-1 File No. EI74104 TÜV Product Service (EN60950) Certificate No. B05 06 38572 055 CB report and certificate to IEC60950
2 advancedenergy.com SMT30E ELECTRiCAL SPECiFiCATiONS Efficiency @12 Vin, 3.3 Vout 91% Insulation voltage Non-isolated Switching frequench Fixed 1.3 MHz Approvals and standards EN60950, UL/cUL60950 Material flammability UL94V-0 Dimensions L x W x H 33.02 x 13.46 x 8.10 mm 1.3 x 0.53 x 0.319 inches Weight 6.3 g (0.22 oz) MTBF Telcordia SR-332 3,289,053 hours GENERAL SPECiFiCATiONS input Input voltage ra nge 8 - 14 Vdc Input current No load (max.) 250 mA Input reflexted ripple 220 mA rms Remote ON/OFF See Note 1 Start-up time 20 ms Output Voltage adjustability 0.8 to 3.63 Vdc Setpoint accuracy ±1.3% typical Line regulation ±0.2% typical Load regulation ±1.5% typical Total error band ±3.0% typical Overshoot/undershoot None Ripple and noise 5 Hz - 20 MHz 60 mV pk-pk 25 mV rms Temperature coefficient ±0.01%/ °C Transient response Vout = 1.5 V 50% - 75% load step Slew rate = 0.5 A μs 3% max. deviation; 10 μs recovery to within ±1% All specifications are typical 12 Vin and 1.5 Vout, full load at 25 °C unless otherwise stated. Cout = 100 μF
advancedenergy.com 3 SMT30E Thermal performance Operating ambient temperature -40 °C to +85 °C (See Note 8) Non-operating temperature -40 °C to +125 °C MSL Level 3 Protection Short-circuit Continuous Thermal Automatic recovery ENViRONMENTAL SPECiFiCATiONS
ORDERiNG iNFORMATiON
Power (Max.) input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load SMT30E-12W3V3-J 99 W 8 - 14 Vdc 0.8 - 3.63 V 0 A 30 A 91% ±0.2% ±1.5% Electrostatic discharge EN61000-4-2, IBC801-2 Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 EMC CHARACTERiSTiCS PART NUMBER SYSTEM WiTH OPTiONS Product Family Rated Output Current Performance input Voltage Type of Output Output Voltage Packaging Options SMT 30 E - 12 W - 3V3 J SMT = Surface mount 30 = 30 Amp E = Enhanced performance 12 = 8 - 14 Vdc W = Wide 0.8 - 3.63 Vdc No “T” suffix = Pb-free RoHS 6/6 compliant in trays -TJ - Pb-free RoHS 6/6 compliant in tape and reel
4 advancedenergy.com SMT30E OUTPUT VOLTAGE ADJUSTMENT The ultra-wide output voltage trim range offers major advantages to users who select the SMT30E-12W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT30E-12W3V3Jconverter leaves the factory the output has been adjusted to the default voltage of 0.8 V. Notes: 1. The SMT30E features a ‘Positive Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT30E: Configuration Converter Operation Remote pin open circuit Unit is ON Remote pin pulled low [Von/off < 0.8 V] Unit is OFF Remote pin pulled high [Von/off >2.8 V] Unit is ON A ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. Please consult the factory for details. 2. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com to find a suitable alternative. A. The derating curve represents the condition at which internal components are within the Artesyn derating guidelines. B. Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter.
6 advancedenergy.com SMT30E MECHANiCAL DRAWiNGS Pin Assignments Pin Function
1 Remote ON/OFF
2 Remote Sense
3 Trim
5 Ground
All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated CONNECTOR (6 PL) WIDTH : 0.112 0.003 [2.840.08] LENGTH : 0.062 0.0016 [1.570.04] SIDE VIEW TOP VIEW 0.048 [1.22] BOTTOM VIEW +Vout +Vin GND Remote ON/OFF SenseTrim 0.190 [4.83] 0.430 [10.92] 0.310 [7.87] 0.297 [7.54] 0.190 [4.83] 0.190 [4.83] 0.405 [10.29] 0.075 [1.91] 0.5300.010 [13.460.25] 0.039 [1.00] 0.039 [1.00] SEATING PLANE 0.319 [8.10] max. INSTALLED HT.
ENG-SMT30E-235-01 1.18 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.