SMT20C2

SMT20C2 ADVANCEDENERGY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

©2020 Advanced Energy Industries, Inc. ARTESYN SIL/SMT20C2 SERIES C-Class Non-Isolated Total Power:

20 Amps

Input Voltage: 4.5 - 13.8 Vdc # of Outputs: Single DATA SHEETAdvanced Energy's Artesyn SMT20C2 series surface mount 20 amp non-isolated DC-DC converter is designed for cost- and space-sensitive applications. It accepts a wide range 4.5 to 13.8 Vdc input and provides an output that is adjustable from 0.59 to 5.1 Vdc to accommodate a wide variety of silicon power needs. Rated at 100 watts, the converter has a typical efficiency of 93%. Standard features include remote sense, remote On/Off and remote ‘power good’ indication. SPECIAL FEATURES  20 A current rating  Input voltage range: 4.5 - 13.8 Vdc  Output voltage: 0.59 - 5.1 V  Industry-leading value  Cost optimized design  Excellent transient response  Output enable  Output voltage adjustability  Path for future upgrades  Supports silicon voltage migration  Reduced design-in and qual time  Current sink capability  RoHS compliant  Two year warranty SAFETY  UL, cUL CAN/CSA 22.2 No.  TÜV Product Service (EN60950)  CB report and certificate to IEC60950

2 advancedenergy.com SIL/SMT20C2 ELECTRICAL SPECIFICATIONS Input Input voltage ra nge 4.5 - 13.8 Vdc Input current Minimum load Remote OFF 50 mA 5 mA Input current (max.) See Note 3 18 A @ lo max. Start-up time Remote ON/OFF 3 ms Output Output voltage See Note 5 0.59 - 5.1 V Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min./max. load 0 A/20 A Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. Ripple and noise

5 Hz to 20 MHz

Vin = 5 V, Vout = 2.5 V Transient response See Note 1, 2 130 mV max. deviation; 50 μs recovery to within regulation band General Efficiency Vin = 5 V, Vo = 2.5 V, lo = 20 A 90% Switching frequency Fixed 750 kHz Material flammability UL94V-0 Approvals and standards EN60950; UL/cUL6950 Weight 8.50 g (0.03 oz.) MTBF 12 V @ 40 °C, 100% load Bellcore 332 6,721,853 hours Coplanarity 150 μm All specifications are typical at nominal input, full load at 25 °C, unless otherwise stated.

advancedenergy.com 3 SIL/SMT20C2 Thermal performance Operating ambient temperature -0 °C to +70 °C See Note 5 Non-operating temperature -40 °C to +125 °C Protection Short-circuit Hiccup, non-latching Overvoltage protection Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 μF Output See Note 7 0 μF ENVIRONMENTAL SPECIFICATIONS

ORDERING INFORMATION

PART NUMBER SYSTEM WITH OPTIONS Product Family Rated Output Current Performance Generation Input Voltage Output Voltage Mounting Option RoHS Compliance SXX 20 C 2 - 00 SADJ - V J SIL = Single In Line SMT = Surface Mount 06 = 6 Amp 15 = 15 Amp 20 = 20 Amp 30 = 30 Amp 40 = 40 Amp C = Cost Optimized Blank = Standard 2 = Increased current density 00 = 4.5 - 13.8 V Single Adjustable Output V = Vertical H = Horizontal Blank = Horizontal Surface Mount J = Pb free (RoHS 6/6 compliant) Model Number (8) Output Power (Max.) Input Voltage Mount Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load SMT20C2-00SADJJ 100 W 4.5 - 13.8 Vdc Horizontal Surface Mount 0.59 - 5.1 V 0 A 20 A 93% ±0.2% ±0.5%

4 advancedenergy.com SIL/SMT20C2 OUTPUT VOLTAGE ADJUSTMENT STANDARD APPLICATION DRAWING The ultra-wide output voltage trim range offers major advantages to users who select the SIL/SMT40C2 series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.59 - 5.1 V. When the SIL20C2 converter leaves the factory, the output has been adjusted to the default voltage of 0.59 V. Notes: 1. Measured as per recommended system capacitance. 2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.75 lo to full lo and full lo to 0.75. 3. External input fusing is recommended. 4. Additional part numbers may be available with different output voltages. 5. Airflow dependent, 100 LFM minimum required. 6. No capacitors needed for ripple current stability. 7. No capacitors needed for stability. 8. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Power representative or use the on-line model number search tool at http://www. artesyn.com to find a suitable alternative. SIL20C2 Enable Vin GND R trim (for trim down) C out R L O A D Power Good Vout +R sense -R sense C in

advancedenergy.com 5 SIL/SMT20C2 MECHANICAL DRAWINGS Pin Assignments Pin Function

1 Vout

2 Trim

3 Ground

4 Power Good

5 Enable

6 Vin

7 Remote Sense (+)

8 Remote Sense (-)

9 Mech Support

(Horizontal version only) Dimensions in Inches (mm) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.050 (1.27) REF 0.295 (7.49) 0.462 (11.73) 0.062 (1.57) PCB REF 0.150 (3.81) TYP 0.105 (2.67) 0.025 (0.64) ±.001 SQ PIN TYP

8 PLACES

0 (0) 0.100 (2.54) 0.200 (5.08) 0.600 (15.24) 0.700 (17.78) 0.800 (20.32) 0.900 (22.86) 1.050 (26.67) 1.150 (29.21) 1.200 (30.48) 0.610 (15.49) PIN 1PIN 8 Dimensions in Inches (mm) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.295 (7.49) 0.482 (12.24) 0.025 (0.64) ±.001 SQ PINS TYP

9 PLACES

0.125 (3.18) TYP 0.120 (3.05) TYP 0.062 (1.57) REF 0.000 (0) 0.200 (5.08) 0.100 (2.54) 0.600 (15.24) 0.700 (17.78) 0.800 (20.32) 0.900 (22.86) 1.050 (26.67) 1.150 (29.21) 1.165 (29.59) 1.200 (30.48) 0.040 (1.02) REF PIN 1 PIN 9 Vertical Mount Horizontal Mount

6 advancedenergy.com SIL/SMT20C2 Dimensions in Inches (mm) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.535 (13.59) PIN 1 PIN 8 PIN 9PIN 10 0.025 (0.64) ±.002 PIN WIDTH TYP 0.295 (7.49) 0.482 (12.24) 0.062 (1.57) PCB REF 0.040 (1.02) 0.125 (3.18) TYP 0 (0) 0.100 (2.54) 0.200 (5.08) 0.600 (15.24) 0.700 (17.48) 0.800 (20.32) 0.900 (22.86) 1.050 (26.67) 1.150 (29.21) 1.200 (30.48) 0.610 (15.49) Surface Mount MECHANICAL DRAWINGS (CONTINUED) Pin Assignments Pin Function

9 Mech Support (Horizontal Version only

10 Mech Support (Horizontal Version only

ENG-SIL/SMT20C2-235-01 12.31 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.