SMT15E

SMT15E ADVANCEDENERGY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

©2021 Advanced Energy Industries, Inc. ARTESYN SMT15E SERIES Non-Isolated DC-DC Converter Total Power:

41.25 Watts

Input Voltage: 3.0 - 5.5 Vdc # of Outputs: Single DATA SHEETAdvanced Energy's Artesyn SMT15E series of non-isolated DC-DC converters comprises two fixed output models offering voltages of 2.5 V or 3.3 V, and one wide output trim model that can adjusted over the range 0.8 to 3.63 Vdc. All three models can deliver up to 15 amps output current. The 3.3 V fixed output model accepts a 4.5 to 5.5 Vdc input, while the other two models accept a 3 to 5.5 Vdc input. SPECIAL FEATURES  15 A current rating  Input voltage range: 3.0 - 5.5 Vdc  Output voltage range: 0.8 - 3.63 V  Ultra high efficiency: 96% @ 5 Vin and

3.3 Vout

 Extremely low internal power dissipation  Minimal thermal design concerns  Designed-in reliability: MTBF of 7 million hours per Telcordia SR-332  Ideal solution where board space is at a premium or tighter card pitch is required  Industry standard surface-mount footprint  Available RoHS compliant  Two year warranty SAFETY  UL, cUL CAN/CSA 22.2 No. E174104  UL 60690 File No. E174104  TÜV Product Service (EN60950:2000)  Certificate No. B 03 10 38572  CB report and certificate to DE3-51686M1

2 advancedenergy.com SMT15E_5 ELECTRICAL SPECIFICATIONS Efficiency See Table below Insulation voltage Non-isolated Switching frequency Fixed 300 kHz Approvals and standards EN60950 UL/cUL60950 Material flammability UL94V-0 Dimensions L x W x H 33.02 x 13.46 x 8.21 mm 1.3 x 0.53 x 0.323 inches Weight 6.3 g (0.22 oz) Coplanarity 100 μm MTBF Telcordia SR-332 MIL-HDBK-217F 7,042,000 hours 680,000 hours GENERAL SPECIFICATIONS Input Input voltage ra nge 3.0 - 5.5 Vdc Input current No load 70 mA typical Input current (max.) 11.8 A max. @ lo max. and Vout = 3.63 V Input reflected ripple 110 mA rms Remote ON/OFF See Note 2 Start-up time <20 ms Output Voltage adjustability (See Note 1) Fixed output versions Wide trim version ±10% 0.8 - 3.63 Vdc Setpoint accuracy ±0.4% Line regulation ±0.2% Load regulation ±0.5% Minimum load 0 A Overshoot/Undershoot None Ripple and noise 0 - 20 MHz BW 60 mV pk-pk 25 mV rms max. Temperature coefficient ±0.01% / °C Transient response 60 mV max. deviation 150 μs recovery to within ±1.0% Remote sense 10% Vo compensation All specifications are typical at nominal input, full load at 25°C unless otherwise stated.

advancedenergy.com 3 SMT15E_5 Thermal performance Operating ambient temperature -0 °C to +100 °C (See Note 3) Non-operating temperature -40 °C to +125 °C Protection Short-circuit Continuous Thermal Automatic recovery Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 ENVIRONMENTAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS

ORDERING INFORMATION

PART NUMBER SYSTEM WITH OPTIONS Product Family Rated Output Current Performance Input Voltage Type of Output Output Voltage Packaging Options (5) SMT 15 E - 05 W - V J SMT = Surface Mount 15 - 15 A E = Enhanced performance 05 = 3.0 - 5.5 Vdc W = Wide 0.8 - 3.63 Vdc No “-T’ sufffix = Pb-free (RoHS 6/6 compliant) in trays Model Number (5) Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load (4) ±0.2% ±1.0%

4 advancedenergy.com SMT15E_5 OUTPUT VOLTAGE ADJUSTMENT The ultra-wide output voltage trim range offers major advantages to users who select the SMT15E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT15E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 3.3 V.

• When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc
• When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc Notes: When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc. 2. The SMT15E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT15E: Configuration Converter Operation Remote pin open circuit Unit is ON Remote pin pulled low Unit is ON Remote pin pulled high [Von/off >1.2 V] Unit is OFF 3. Full derating curves available in both the Longform Datasheet and Application Note 136. 4. When the unit is trimmed down to 0.8 V, the efficiency is 82.5%. 5. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com to find a suitable alternative.

advancedenergy.com 5 SMT15E_5 Pin Assignments Pin Function

1 Remote ON/OFF

2 Remote Sense +

3 Trim

5 Ground

All dimensions in inches (mm) All tolerance ±0.010in ( ±0.25mm) unless otherwise stated SIDE VIEW 0.323 (8.21) Installed Ht. 0.007 (0.18) Min Clearance Max. component Connector (6PL) Seating Plane 0.039 (1.00) 0.039 (1.00) 0.530 ±0.010 (13.46 ± 0.25) TOP VIEW BOTTOM VIEW 5 4 3 2 6 1 0.430 (10.92) 0.048 (1.22) 0.075 (1.91) 0.405 (10.29) 0.297 (7.54) 0.190 (4.83) 0.190 (4.83) 0.190 (4.83)0.310 (7.87)

ENG-SMT15E_5-235-01 1.18 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.