SMT10E ADVANCEDENERGY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
©2021 Advanced Energy Industries, Inc. ARTESYN SMT10E SERIES
13.2 Watts Non-Isolated DC-DC Converters
Total Power:
13.2 Watts
Input Voltage: 3.0 - 5.5 Vdc # of Outputs: Single DATA SHEETAdvanced Energy's Artesyn SMT10E series of non-isolated DC-DC converters comprises five fixed output models offering trim model that can adjusted over the range 0.8 to 3.63 Vdc. All six models can deliver up to 10 amps output current. The 3.3 V fixed output model accepts a 4.5 to 5.5 Vdc input, while all other models accept a 3 to 5.5 Vdc input. SPECIAL FEATURES 10 A current rating Input voltage range: 3.0 - 5.5 Vdc Output voltage range: 0.8 - 3.63 V Ultra-high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-322 Ideal solution where board space is at a premium or tighter card pitch is required Industry standard surface-mount footprint Available RoHS compliant Two year warranty SAFETY UL, cUL CAN/CSA 22.2 No. E186249 TÜV Product Service (EN60950) Certificate No. B 08 05 51485 378 CB report and certificate to DE3-51686M1
2 advancedenergy.com SMT10E SERIES ELECTRICAL SPECIFICATIONS Efficiency See table Insulation voltage Non-isolated Switching frequency Fixed 300 kHz typical Approvals and standards EN60950 UL/cUL60950 Material flammability UL94V-0 Dimensions L x W x H 33.02 x 13.46 x 8.21 mm 1.3 x 0.53 x 0.323 inches Weight 6.3 g (0.22 oz) MTBF Telcordia SR-332 MIL-HDBK-217F 7,042,000 hours 680,000 hours GENERAL SPECIFICATIONS Input Input voltage ra nge 3.0 - 5.5 Vdc Input current No load 70 mA Input current (max.) 8 A max. @ Io max. and Vout = 3.63 V Input reflected ripple 110 mA rms Remote ON/OFF See Note 2 Start-up time 20 ms Output Voltage adjustability (See Note 1) Fixed output versions Wide trim version ±10% 0.8 - 3.63 Vdc Setpoint accuracy ±0.4% Line regulation ±0.2% Load regulation ±1.0% Minimum load 0 A Overshoot/undershoot None Ripple and noise 0 to 20 MHz BW 50 mV pk=pk 25 mV rms max. Temperature co-efficient ±0.01%/ °C Transient response 60 mV max. deviation 50 μs recovery to within ±1.0% Remote sense 10% Vo compensation Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
advancedenergy.com 3 SMT10E SERIES Thermal performance Operating ambient temperature -40 °C to +100 °C See Note 3 Non-operating temperature -40 °C to +125 °C Protection Short-circuit Continuous Thermal Automatic recovery Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 ENVIRONMENTAL SPECIFICATIONS EMC CHARACTERISTICS
ORDERING INFORMATION
PART NUMBER SYSTEM WITH OPTIONS Product Family Rated Output Current Performance Input Voltage Type of Output Output Voltage Packaging Options SMT 10 E - 05 W 3V3 - J SMT = Surface Mount 10 = 10 Amp E = Enhanced Performance 05 = 3.0 - 5.5 Vdc W = Wide 3.3 = 3.3 V J = Pb-free RoHS 6/6 compliant Model Number (3, 4) Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load
4 advancedenergy.com SMT10E SERIES Pin Assignments Pin Function
1 Remote ON/OFF
2 Remote Sense +
3 Trim
5 Ground
The ultra-wide output voltage trim range offers major advantages to users who select the SMT10E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT10E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 3.3V.
- When Vin >4.5 V, then Vout can be adjusted from 0.8 - 3.6 Vdc
- When Vin <4.5 V, then Vout can be adjusted from 0.8 - 2.75 Vdc Notes: When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc. 2. The SMT10E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. Configuration Converter Operation Remote pin open circuit Unit is ON Remot pin pulled low Unit is ON Remote pin pulled high [Von/off > 1.2 V] Unit is OFF A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘-R’ at the end of the model number, e.g. SMT10E-05W3V3-RJ. 3. Full derating curves available in both the Longform (Technical Reference) and Application Note 168. 4. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Power representative or use the on-line model number search tool at http://www.artesyn.com to find a suitable alternative. MECHANICAL DRAWINGS SIDE VIEW Connector (6PL ) Width: 0.112 0.003 (2.84 0.08) Length: 0.062 0.002 (1.57 0.04) 0.039 (1.00) 0.530 0.010 (13.46 0.25) BOTTOM VI EW 0.190 (4.83) 0.190 (4.83) 0.190 (4.83)0.310 (7.87) 0.039 (1.00) TOP VIEW All dimensions in inches (mm) All tolerance 0.010in (0.25 mm) unless otherwise stated 5 4 3 2 6 1 0.430 (10.92) 0.048 (1.22) 0.075 (1.91) 0.405 (10.29) 0.297 (7.54) 0.323 (8.21) Installed Ht. 0.007 (0.18) Min Clearance Max. compone nt Seating Plane
ENG-SMT10E_5-235-01 1.18 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.