SMT06C EMERSON-NETWORKPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Business-Critical Continuity SMT06C Series

5 Vin and 12 Vin

  • 6 A current rating
  • Input voltage range: 4.5 Vdc - 5.5 Vdc or 10.2 Vdc - 13.8 Vdc
  • Output voltage range: 0.9 Vdc - 3.3/5.0 Vdc
  • Industry leading value
  • Cost optimized design
  • Excellent transient response
  • Output voltage adjustability
  • Pathway for future upgrades
  • Supports silicon voltage migration
  • Resulting in reduced design-in and qualification time
  • Designed in reliability: MTBF of >7 million hours per Telcordia SR-332
  • Available RoHS compliant
  • 2 year warranty Total Power: 20W Input Voltage: 4.5-5.5 Vdc or 10.2 - 13.8 Vdc # of Outputs: Single Safety UL/cUL : CAN/CSA 22.2 No. 60950 TÜV Product Service (EN60950:2000) CB report and certificate Rev. 08.20.08_j93 SMT06C 1 of 4 Output Voltage adjustability (see note 6) 5 V input models 0.9 - 3.3 Vdc 12 Vins 0.9 - 5.0 Vdc Output setpoint accuracy 1.0% trim resistors ±2.5% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min/max load 0 A / 6 A Overshoot (at turn on) 5 V input models 3.0% max. 12 V input models 1.0% max. Undershoot At turn-off 100 mV max. Ripple and noise 5 Hz to 20 MHz (See note 2) See table on page 2 Transient response (see note 1) 75 mV max. deviation 150 μs recovery to within regulation band Electrical Specifications

Rev. 08.20.08_j93 SMT06C 2 of 4 Embedded Power for Business-Critical Continuity All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. Input Input voltage range 5 V input model 4.5 - 5.5 Vdc 12 V input model 10.2 - 13.8 Vdc Input current Minimum load 50 mA Remote OFF 5 mA Input current (max.) (see note 8) 5 V input model 5.1 A max. @ lo max. 12 V input model 1.6 A @ lo max. Input reflected ripple (see note 2)

5 Vin 52 mA (pk-pk)

12 Vin 56 mA (pk-pk)

2.4 Vdc <0.8 Vdc Start-up time (see note 3) Power up <20 ms Remote ON/OFF <20 ms Turn ON threshold 5 Vin 4.5 Vdc typ. 12 Vin 9.3 Vdc typ. Turn OFF threshold 5 Vin 4.3 Vdc typ. 12 Vin 7.8 Vdc typ. Thermal performance (see note 9) Operating ambient, 0 °C to +80 °C temperature Non-operating -40 °C to +125 °C Protection Short-circuit Hiccup, non-latching Recommended system capacitance Input capacitance (See note 10) 270 μF/20 mW ESR max. Output capacitance (See note 10) 680 μF/10 m W ESR max. Environmental Specifications General Specifications Efficiency See table on page 2 Switching frequency Fixed 200 kHz. Approvals and standards (See note 4) TÜV product Services IEC69050, UL/cUL60950 Material flammability UL94V-0 Weight 9.3 g (0.3 oz.) Coplanarity 150 µm MTBF Telcordia SR-332 7,562,142 hours

Rev. 08.20.08_j93 SMT06C 3 of 4 Embedded Power for Business-Critical Continuity Notes 1 di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo max. to 0.75 lo 2 Measured with external filter. See Application Note 169 for details. 3 Power up is the time from application of dc input to Power Good high. Remote ON/OFF asserted high to Power Good high.

4 This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product. 5 Measured as per recommended set-up. Cin = 270 μF (20 mW ESR max.). Cout = 680 μF (10 mW ESR max.). 6 Uses external resistor from trim to ground. Minimum value 485 W for 5 V model, 280 W for 12 V model. See Application Note 169 for details. 7 Signal line assumed <3 m. 8 External input fusing recommended. 9 See Application Note 169 for operation above 50 ºC. 10 See Application Note 169 for more details.

11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special

request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local representative or use the on-line model number search tool at www.powerconversion.com to find a suitable alternative. Ripple and Noise Specification OutputModel Voltage Pk - Pk RMS 5 V input models 0.9 Vdc to 2.5 Vdc 30 mV 15 mV

3.3 Vdc 40 mV 15 mV

12 V input models 0.9 Vdc to 2.5 Vdc 40 mV 20 mV

3.3 Vdc to 5 Vdc 50 mV 20 mV

All specifications are typical at nominal input Vin = 12 V, full load at 25 °C unless otherwise stated. The ultra-wide output voltage trim range offers major advantages to users who select the SMT06C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT06C series converter leaves the factory the output has been adjusted to the default voltage of 0.9 V. Output Voltage Adjustment of the SMT20C Series

Ordering Information

(max) Input Voltage Output Voltage (11) Output Current (min) Output Current (max) Maximum Load (typ) Regulation Model Numbers (12, 13) Line Load Product Family SMT = Surface Mount Rated Output Current 06 = 6 A Input Voltage 05 = 4.5 Vdc to 5.5 Vdc 12 = 10.2 Vdc to 13.8 Vdc Packaging Options J = PB-free (RoHS 6/6 compliant) Number of Outputs SADJ = Single Adjustable Output Performance C = C Series Part Number System with Options

5810 Van Allen Way

Carlsbad, CA 92008 USA Telephone: +1 (760) 930 4600 Facsimile: +1 (760) 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com technicalsupport@ powerconversion.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Embedded Power for Business-Critical Continuity Rev. 08.20.08_j93 SMT06C 4 of 4 Pin connections Pin Number Function

1 Remote ON/OFF

2 Power Good

3 Trim

4 Vout

5 GND

6 Vin

Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. EmersonNetworkPower. com Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Mechanical Drawing All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated 0.019 (0.48) TYP 0.530 (13.46) 1.200 (30.48) 0.050 (1.27) 0.430 (10.93) 0.190 (4.83) 0.190 (4.83) 0.190 (4.83) 0.190 (4.83) 0.310 (7.87) PIN 2 PIN 1 PIN 6 PIN 5 Seating Plane 0.089 (2.26) 6 x 0.315 (8.00) 0.062 (1.57) REF 0.466 (11.83) Installed Ht. 0.75 (1.90)