SMT05E ADVANCEDENERGY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
©2021 Advanced Energy Industries, Inc. ARTESYN SMT05E SERIES
12 V Non-Isolated DC-DC Converters
Total Power: 16.5 W Input Voltage: 10 - 14 Vdc # of Outputs: Single DATA SHEETAdvanced Energy's Artesyn SMT05E_12V series non-isolated DC-DC converter accepts a 10 to 14 Vdc input and produces an output that can be trimmed over a very wide 0.8 to 3.63 Vdc range to satisfy a broad diversity of semiconductor power needs. Rated at 16.5 watts, the converter has a typical efficiency of 91% and can deliver up to 5 amps. Standard features include remote On/Off and comprehensive protection against short- circuit and overtemperature conditions. Packaged as a low profile surface-mount module, it has a footprint of 0.45 x 0.8 inch (11.4 x 20.3 mm) and an installed height of only 0.23 inch (5.9 mm). SPECIAL FEATURES 5 A current rating Input voltage range: 10 - 14 Vdc Output voltage range: 0.8 - 3.63 V Ultra-high efficiency: 91% @ 12 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of 6,920,000 hours per Telcordia SR-322 Ideal solution where board space is at a premium or tighter card pitch is required Industry standard surface-mount footprint Available RoHS compliant Two years warranty SAFETY UL, cUL CAN/CSA 22.2 No. E174104 UL60950 File No. E174104 TÜV Product Service (EN60950) Certificate No. B 03 10 38572 CB report and certificate to DE3-51686M1
2 advancedenergy.com SMT05E 12V ELECTRICAL SPECIFICATIONS Input Input voltage ra nge 10 - 14 Vdc Input current No load (max.) 100 mA Input reflected ripple 30 mA rms Remote ON/OFF See Note 1 Start-up time 20 ms Output Voltage adjustability 0.8 - 3.63 Vdc Setpoint accuracy ±0.4%. Line regulation ±0.2% Load regulation ±1.0% Minimum load 0 A Overshoot/undershoot None Ripple and noise
5 Hz to 20 MHz
60 mV pk=pk 25 mV rms Temperature co-efficient ±0.01%/ °C Transient response 50 mV max. deviation 50 μs recovery within ±1% Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. Efficiency 91% Insulation voltage Non-isolated Switching frequency Fixed 330 kHz typical Approvals and standards EN60950 UL/cUL60950 Material flammability UL94V-0 Dimensions L x W x H 20.32 x 11.43 x 5.97 mm 0.800 x 0.450 x 0.235 inches Weight 3g (0.11 oz.) Coplanarity 100 μm MTBF Telcordia SR-332 6,920,000 hours GENERAL SPECIFICATIONS
advancedenergy.com 3 SMT05E 12V Thermal performance Operating ambient temperature -40 °C to +100 °C See Note 2 Non-operating temperature -40 °C to +125 °C Protection Short-circuit Continuous Thermal Automatic recovery Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 ENVIRONMENTAL SPECIFICATIONS EMC CHARACTERISTICS
ORDERING INFORMATION
PART NUMBER SYSTEM WITH OPTIONS Product Family Rated Output Current Performance Input Voltage Type of Output Mounting Option Packaging Options SMT 05 E - 12 W - 3V3 TJ SMT = Surface Mount 05 = 5 Amp E = Enhanced Performance 12 = 10 - 14 VDC S = Single W = Wide 0.8 - 3.63 Vdc No ‘-T’ suffix = Pb-free RoHS 6/6 compliant (Trays) -TJ suffix = Pb-free RoHS 6/6 compliant (Tape and Reel) Model Number (3, 4) Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load
4 advancedenergy.com SMT05E 12V Pin Assignments Pin Function
1 Remote ON/OFF
2 Vout
3 Trim
4 Ground
5 Vin
The ultra-wide output voltage trim range offers major advantages to users who select the SMT05E-12W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 to 3.63 Vdc. When the SMT05E-12W3V3J converter leaves the factory, the output has been adjusted to the default voltage of 0.8 V. Notes: 1. The SMT05E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT05E: Configuration Converter Operation Remote pin open circuit Unit is ON Remot pin pulled low [Von/off 0.8 V] Unit is OFF Remote pinpulled high [Von/off > 1.6 V] Unit is ON A ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. To order please use part number SMT05E-12W3V3-RJ. 2. Full derating curves available in both the Longform (Technical Reference) and Application Note. 3. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Power representative or use the on-line model number search tool at http://www. artesyn.com to find a suitable alternative. All dimensions in inches (mm) All tolerance ±0.010in ( ±0.25mm) unless otherwise stated BOTTOM VIEW Connector (5PL) Width :0.090 (2.29) Length: 0.062 (1.57) 0.060 (1.52) SIDE VIEW Seating Plane 0.062 (1.57) TOP VIEW 0.800 (20.32) 0.450 (11.43) 5 1 4 3 2 0.350 (8.90) 0.190 (4.83) 0.160 (4.06) 0.180 (4.57) 0.160 (4.06) 0.340 (8.64) 0.235 (5.97) MECHANICAL DRAWINGS
ENG-SMT05E 12V-235-01 1.12 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.