SMSS

SMSS SAMTEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Mini Mate ® Connector Series: MMTS, MMTD, MMTST, MMTDT, STS-N-005 SMSS and SMSD Series Rev. A CAT-EX-74-01 - Extraction Tool Date: 5/16/2014 Page 2 of 3 This is a controlled document and is subject to change (printed versions are not controlled) The CC83 Mini Mate contact has a retaining lance that can be released through an access window located on the outside of the housing as shown in Figure 3. The Extraction tool has a tip that is inserted into the window to depress the lance the correct amount for contact removal. CAUTION - Do not use any unintended tools to release the lance. This can cause damage to the lance and weaken its ability to retain the reinserted contact in the housing. 4. EXTRACTION PROCEDURE The following steps are recommended: 1. Push the desired lead forward to the bottom of its cavity. This will provide clearance for the lance to be depressed. 2. Engage the tip of the Extraction Tool in the lance window as shown in Figure 2 and Figure 3. With downward pressure, push the tool toward the back of the window to release the lance. 3. Maintain downward pressure on the tool tip then grip the lead and pull the contact from its cavity. FIGURE 2

Mini Mate ® Connector Series: MMTS, MMTD, MMTST, MMTDT, STS-N-005 SMSS and SMSD Series Rev. A CAT-EX-74-01 - Extraction Tool Date: 5/16/2014 Page 3 of 3 This is a controlled document and is subject to change (printed versions are not controlled) FIGURE 3