SMS7630-061_15 SKYWORKS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
Extremely low barrier height Suitable for use above 26 GHz Low parasitic impedance: CP < 0.05 pF, LS < 0.2 nH Low profile, ultra-miniature 0201 SMT package (MSL1, 260 C per JEDEC J-STD-020) Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074.
Description
The SMS7630-061 is a silicon, zero bias Schottky detector diode with an ultra-miniature 0201 footprint and very low barrier height. This P-type diode can be used for sensitive video detector circuits and sampling circuits. The low barrier height results in good detector sensitivity without the need for external bias current. The low junction capacitance of this diode makes it an excellent detector at frequencies up to 26 GHz and higher. A pinout diagram for the SMS7630-061 is shown in Figure 1. Top View Bottom View Y1952 Figure 1. SMS7630-061 Pinout Diagram
24 GHz Detector Design
GND by a 90 degree line with a stud (GND arrives by a via). The cathode of the diode is directly connected to a 24 GHz stub. capacitor. The output voltage is fed to a 2-pin, 2.54 mm header. design is illustrated in Figure 3. Figure 2. Schematic of a 24 GHz Detector Design Figure 3. Layout for a 24 GHz Detector Design
24 GHz Rat-Race Mixer
degrees apart from the LO input and are terminated in a stub. to the rat-race ring. A layout design is illustrated in Figure 5. Typical conversion loss data for this mixer is shown in Figure 9. Figure 4. Schematic of a 24 GHz Rat-Race Mixer Figure 5. Layout for a 24 GHz Rat-Race Mixer
associated SPICE model parameters are provided in Table 3. Figure 10. Package dimensions are shown in Figure 11, and tape and reel dimensions are provided in Figure 12. moisture after the container seal is broken must be followed. Solder Reflow Information, document number 200164. done manually or in a production solder reflow environment. Table 1. SMS7630-061 Series Absolute Maximum Ratings (Note 1) parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 2. SMS7630-061 Electrical Specifications (Note 1) Note 1: Performance is guaranteed only under the conditions listed in this table.
Table 3. SPICE Model Parameters
- Carrier tape: black conductive polycarbonate bakeable
- Cover tape: transparent conductive material.
- Cover tape size: 5.4 mm width.
- ESD surface resistivity meets requirements of GP01-D232.
Figure 12. SMS7630-061 Tape and Reel Dimensions Copyright © 2010, 2012, 2015 Skyworks Solutions, Inc. All Rights Reserved. update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. damages resulting from such improper use or sale. applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.