CY700SMS POWER-ONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
High Density - Board Mounted Power Division Powering Communications and Technology 10 20 30 40 50 60 70 80 90 100 LOAD % EFFICIENCY % SMS012ZE SMS012ZG 10 20 30 40 50 60 70 80 90 100 LOAD % EFFICIENCY % SMS012YE SMS012YG Setpoint Accuracy ±1% Line Regulation Vin Min. - Vin Max., Iout Rated ±0.1% V out Load Regulation Iout Min. - Iout Max., Vin Nom ±0.2% V out Minimum Output Current 10 % I out Rated Dynamic Regulation, Loadstep 25% I out Pk Deviation 4% V out Settling Time 500 ms Short Circuit / Overcurrent Protection Shutdown / Hiccup Current Limit Threshold Range, % of I out Rated 110 - 130% TECHNICAL SPECIFICATIONS Voltage Range
24 VDC Nominal 18 - 36 VDC
48 VDC Nominal 36 - 72 VDC
Input Reverse Voltage Protection Shunt Diode SMS surface-mountable DC/DC converters feature up to 12 Watts of output power. The SMS is a fully isolated converter with 1500 VDC isolation, short circuit, and undervoltage lockout protection. The SMS is available with remote shutdown, as well as an optional active current share, to allow for high power distributed operation. Available in 24 or 48 VDC input versions, the SMS is well suited to telecom and networking applications.
- Industry Standard Package
- Industry Standard Pinout
- 85°C Case Operation
- Short Circuit Protection
- 6-Sided Shielding
- 24V and 48V Input Versions
- Input Pi Filter
- Regulated Outputs
- 1500V Isolation Input Output Turn-On Time 10 ms Remote Shutdown Positive Logic Switching Frequency 400 kHz Isolation Input - Output 1500 VDC Temperature Coefficient ±0.03%/°C Operating Temperature Ambient Operating Range 100 LFM -40 To +85°C Ambient Operating Range Convection -40 To +70°C Storage Range -40 To +100°C Humidity Max., Non-Condensing 95% Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz MTBF† (Bellcore TR-NWT-000332) Consult Factory Safety Consult Factory Weight (approx.) 0.4 oz General
DESCRIPTION
FEATURES
Efficiency vs. Load (48V Input) Efficiency vs. Load (24V Input) SMS SERIES
12 WATT
† MTBF predictions may vary slightly from model to model. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compat- ible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information.Units are water-washable and fully compatible with commercial spray or immersion post wave-solder washing equipment.
Natural Convection 21.1 °C/W 100 LFM 10.4 °C/W 200 LFM 6.8 °C/W 300 LFM 5.6 °C/W 400 LFM 4.3 °C/W Tolerances Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. Pin Function SMS SERIES
2 S/D
7 OPTION
Inches: (Millimeters) Pin: ± 0.002 ± 0.05 (Dimensions as listed unless otherwise specified.) MODELS - (See the last page of Section for options.) /K2D/K30/K2E/K30/K36/K22/K28/K2D/K31/K2E/K35/K6D/K6D/K29 /K30/K2E/K38/K37/K35/K22/K28/K32/K32/K2E/K32/K6D/K6D/K29 /K30 /K28/K30/K2E/K36/K6D/K6D/K29 /K28/K32/K34/K2E/K39/K6D/K6D/K29 /K28/K32/K31/K2E/K36/K6D/K6D/K29 /K28/K39/K2E/K35/K6D/K6D/K29 /K31/K2E/K30/K30/K22 /K28/K32/K35/K2E/K34/K6D/K6D/K29 /K32/K2E/K30/K30/K22 /K28/K35/K30/K2E/K38/K6D/K6D/K29 /K30/K2E/K30/K32/K35/K22 /K54/K59/K50/K2E /K30/K2E/K39/K38/K22/K30/K2E/K38/K35/K22 /K30/K2E/K33/K37/K35/K22 /K54/K4F/K50 /K56/K49/K45/K57 /K35/K36/K37/K38 /K34/K33/K32/K31 /K4C/K41/K4E/K44 /K50/K41/K54/K54/K45/K52/K4E /K30/K2D/K30/K2E/K34/K30/K22 /K28/K2D/K31/K30/K2E/K32/K6D/K6D/K29 /K30/K2E/K34/K30/K30/K22 /K28/K31/K30/K2E/K32/K6D/K6D/K29 /K30/K2E/K38/K30/K30/K22 /K28/K32/K30/K2E/K33/K6D/K6D/K29 /K31/K2E/K32/K30/K30/K22 /K28/K33/K30/K2E/K35/K6D/K6D/K29 t r a h C n o i t c e l e S l e d o M n i V ) s t l o V ( e g n a R n i V ) s t l o V ( * . x a M n i I ) s p m A ( t u o V ) s t l o V ( d e t a R t u o I ) s p m A ( e s i o N & e l p p i R ) V m ( k P - k P y c n e i c i f f E * * . p y T C Y 7 0 0 S M S E Y 2 1 0 S M S G Y 2 1 0 S M S C Z 7 0 0 S M S D Z 9 0 0 S M S E Z 2 1 0 S M S G Z 2 1 0 S M S 4 2 4 2 4 2 8 4 8 4 8 4 8 4 6 3 - 8 1 6 3 - 8 1 6 3 - 8 1 2 7 - 6 3 2 7 - 6 3 2 7 - 6 3 2 7 - 6 3 2 5 . 0 2 8 . 0 2 8 . 0 6 2 . 0 2 3 . 0 1 4 . 0 1 4 . 0 1 . 2 3 . 3 0 . 5 1 . 2 5 . 2 3 . 3 0 . 5 3 . 3 6 . 3 4 . 2 3 . 3 6 . 3 6 . 3 4 . 2 0 5 0 5 0 5 0 5 0 5 0 5 0 5 % 4 8 % 6 8 % 8 8 % 2 8 % 5 8 % 7 8 % 8 8 . r e w o p t u p t u o d e t a r m u m i x a m , e g a t l o v t u p n i m u m i n i m t a t n e r r u c t u p n i m u m i x a M * . t u p t u o d e t a r , n i V l a n i m o n t A * * High Density - Board Mounted Power Division Powering Communications and Technology
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. Example Options: HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length. NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manu- factured. Specifications are subject to change without notice. OPTIONS SUFFIX APPLICABLE SERIES REMARKS Negative Logic N HAS, HBD, HBS, HES, HLS, LES, TTL "Low" Turns Module ON QBS, QES, QLS, TES, TQD TTL "High" Turns Module OFF Lucent Compatible Trim T HAS, HBD, HBS, HES, HLS, QBS, QES, QLS Terminal Strip TS XWS, XWD, XWT Trim 1 IAS, LES Enable 2 IAD, IAS, LES, SMS Trim and Enable 3 IAS, LES Current Share 4 SMS Headerless Y Encapsulated EWS, IWS, OWS PIN LENGTH AND HEATSINK OPTIONS Standard Pin Length is 0.180" (4.6mm) 0.110" (2.8mm) Pin Length 8 All Units (Except SMS) 0.150" (3.8mm) Pin Length 9 All Units (Except SMS) 0.24" (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, HLS, HLD, QLS, SIP, SM TLD, and TKD Packages) Includes Thermal Pad 0.24" (6.1mm) Vertical Heatsink 1V All Units (Except DIP, HLS, HLD, QLS, SIP, SM TLD, and TKD Packages) Includes Thermal Pad 0.45" (11.4mm) Horizontal Heatsink 2H All Units (Except DIP, HLS, HLD, QLS, SIP, SM TLD, and TKD Packages) Includes Thermal Pad 0.45" (11.4mm) Vertical Heatsink 2V All Units (Except DIP, HLS, HLD, QLS, SIP, SM TLD, and TKD Packages) Includes Thermal Pad 0.95" (24.1mm) Horizontal Heatsink 3H All Units (Except DIP, HLS, HLD, QLS, SIP, SM TLD, and TKD Packages) Includes Thermal Pad 0.95" (24.1mm) Vertical Heatsink 3V All Units (Except DIP, HLS, HLD, QLS, SIP, SM TLD, and TKD Packages) Includes Thermal Pad High Density - Board Mounted Power Division Powering Communications and Technology