SMP30-220

SMP30 STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

SMP30-xxx® n Bidirectional crowbar protection n Voltage range from 62V to 270V n Low capacitance from 12pF to 20pF typ.@ 50V n Low leakage current: IR = 2µA max. n Holding current: IH = 150 mA min. n Repetitive peak pulse current: IPP = 30 A (10/1000 µs)

FEATURES

(JEDEC DO-214AC) The SMP30-xxx series has been designed to protect telecommunication equipment against lightning and transient induced by AC power lines. The package / die size ratio has been optimized by using the SMA package.

DESCRIPTION

TELECOM EQUIPMENT PROTECTION: TRISIL™ November 2002 - Ed: 4B Telecommunication equipment such as n Analog and digital line cards (xDSL, T1/E1, ISDN...). n Terminals (phone, fax, modem...) and central office equipment. MAIN APPLICATIONS Trisils are not subject to ageing and provide a fail safe mode in short circuit for a better protection. Trisils are used to help equipment to meet various standards such as UL1950, IEC950 / CSA C22.2, UL1459 and FCC part 68. Trisils have UL94 V0 resin approved. SMA package is JEDEC registred. (Trisils are UL 497B approved - file: E136224). BENEFITS

(V) Voltage Waveform (µs) Required peak current (A) Current Waveform (µs) Minimum serial resistor to meet standard (Ω ) GR-1089 Core First level 2500 1000 500 100 GR-1089 Core Second level 5000 2/10 500 2/10 40 GR-1089 Core Intra-building 1500 2/10 100 2/10 0 ITU-T-K20 / K21 6000 1500 10/700 150 37.5 5/310 110 ITU-T-K20 (IEC61000-4-2) 6000 8000 1/60 ns ESD contact discharge ESD air discharge VDE0433 4000 2000 10/700 100 50 5/310 60 VDE0878 4000 2000 1.2/50 100 50 1/20 18 IEC61000-4-5 4000 4000 1.2/50 100 100 FCC Part 68, lightning surge type A 1500 800 200 100 FCC Part 68, lightning surge type B 1000 9/720 25 5/320 0 IN COMPLIANCES WITH THE FOLLOWING STANDARDS Symbol Parameter VRM Stand-off voltage IRM Leakage current at VRM VR Continuous reverse voltage VBR Breakdown voltage VBO Breakover voltage IH Holding current IBO Breakover current IPP Peak pulse current C Capacitance

ELECTRICAL CHARACTERISTICS

(Tamb = 25°C) Symbol Parameter Value Unit R th(j-a) Junction to ambient with recommended footprint 120 °C/W R th(j-l)Junction to leads 30 °C/W THERMAL RESISTANCES

Symbol Parameter Value Unit IPP Repetitive peak pulse current: 10/1000 µs 8/20 µs 10/560 µs 5/310 µs 10/160 µs 1/20 µs 2/10 µs 100 A I FS Fail safe mode: maximum current 8/20 µs 2.5 kA ITSM Non repetitive surge peak on-state current (Sinusoidal) t = 20ms t = 16.6ms t = 0.2s t=2 s 8.5 4.5 A I²t I²t value for fusing t = 16.6ms t = 20ms 2.1

2.25 A²s

T L Maximum lead temperature for soldering during 10 s. 260 °C Tstg Tj Storage temperature range Maximum junction temperature -5 5t o+1 5 0 150 ABSOLUTE RATINGS (Tamb = 25°C) tr: rise time (µs) tp: pulse duration time (µs) ex: Pulse waveform 10/1000µs tr = 10µs tp = 1000µs Repetitive peak pulse current 100 %I PP t tr p 0 t

IRM @V RM max IR @V R MAX Note 1 DYNAMIC VBO @I BO max Note 2 STATIC VBO @I BO max Note 3 IH min Note 4 C typ. Note 5 C typ. Note 6 µA V µA V V mA V mA mA pF pF SMP30-62 62 85 800 800 150 20 40 SMP30-68 61 68 93 90 150 20 40 SMP30-100 90 100 135 133 150 16 35 SMP30-120 108 120 160 160 150 16 30 SMP30-130 117 130 173 173 150 14 30 SMP30-180 162 180 235 240 150 14 25 SMP30-200 180 200 262 267 150 12 25 SMP30-220 198 220 285 293 150 12 25 SMP30-240 216 240 300 320 150 12 25 SMP30-270 243 270 350 360 150 12 25 Note 1: IR measured at VR guarantee VBRmin ≥ VR Note 2: See functional breakover voltage test circuit 1. Note 3: See test circuit 2. Note 4: See functional holding current test circuit 3. Note 5: VR = 50V bias,VRMS = 1V, F = 1MHz. Note 6: VR = 2V bias, VRMS = 1V, F = 1MHz ELECTRICAL PARAMETERS (Tamb = 25°C) 1E-2 1E-1 1E+0 1E+1 1E+2 1E+3 F=50Hz t(S) I (A)TSM Fig. 1:Non repetitive surge peak on-state current versus overload duration (Tj initial = 25°C) 0123456789 1 0 V (V)T I (A)T Tj=25°C Fig. 2:On-state voltage versus on-state current (typical values).

-40 -20 0 20 40 60 80 100 120 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 T (°C)j I [T ] / I [T =25°C]Hj Hj Fig. 3:Relative variation of holding current versus junction temperature. -40 -20 0 20 40 60 80 100 0.90 0.95 1.00 1.05 1.10 62 V 270 V V [T ] / V [T =25°C]BO j BO j T (°C)j Fig. 4:Relative variation of breakover voltage ver- sus junction temperature. 25 50 75 100 125 100 1000 2000 I [T ] / I [T =25°C]RM j RM j V= VRR M T (°C)j Fig. 5:Relative variation of leakage current versus junction temperature (typical values). 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 1E-1 1E+0 1E+1 1E+2 Z (°C/W)th(j-a) Zth(j-a) t (s)p Fig. 6:Relative variation of thermal impedance versus pulse duration. 1 2 5 10 20 50 100 300 0.0 0.5 1.0 1.5 2.0 2.5 V (V)R C[V ] / C[V =50V]RR Tj=25°C F=1MHz VRMS=1V Fig. 7:Relative variation of junction capacitance versus reverse voltage applied (typical values).

100 V / µs, di/dt < 10 A / µs, Ipp = 30A

U 10 µF 2 Ω 45 Ω 66 Ω 470 Ω 83 Ω 0.36 nF 46 µH Key Tek ‘System 2’ generator with PN246I module 1 kV / µs, di/dt < 10 A / µs, Ipp = 10 A U 60 µF 26 µH 12 Ω 250 Ω 46 µH47 Ω Key Tek ‘System 2’ generator with PN246I module TEST CIRCUIT 1 FOR DYNAMIC IBO and VBO PARAMETERS TEST CIRCUIT 2 for IBO AND V BO PARAMETERS. 220V 50Hz R1 = 140Ω R2 = 240Ω K ton = 20ms IBO measurement VBO measurementVout DUT TEST PROCEDURE : n Pulse test duration (tp = 20ms): - For Bidirectional devices = Switch K is closed - For Unidirectional devices = Switch K is open. n VOUT Selection - Device with VBO < 200 Volt -VOUT = 250 VRMS ,R1 = 140Ω . - Device with VBO ≥ 200 Volt -VOUT = 480 VRMS ,R2 = 240Ω .

TEST CIRCUIT 3 for IH PARAMETERS. R VBAT = - 48 V Surge generator D.U.T This is a GO-NO GO test which allows to confirm the holding current (IH ) level in a functional test circuit. TEST PROCEDURE : - Adjust the current level at the IH value by short circuiting the D.U.T. - Fire the D.U.T. with a surge current : Ipp = 10A, 10/1000µs. - The D.U.T. will come back to the off-state within 50 ms max. PACKAGE MECHANICAL DATA SMA (JEDEC DO-214AC) REF. DIMENSIONS Millimeters Inches Min. Max. Min. Max. A1 1.90 2.70 0.075 0.106 A2 0.05 0.20 0.002 0.008 b 1.25 1.65 0.049 0.065 c 0.15 0.41 0.006 0.016 E 4.80 5.60 0.189 0.220 E1 3.95 4.60 0.156 0.181 D 2.25 2.95 0.089 0.116 1.65 1.45 1.45 (0.065) FOOT PRINT in millimeters (in inches) E C L D b

Trisil™ Surface Mount I = 30APP Voltage ORDER CODE Part number Marking Package Weight Base qty Delivery mode SMP30-62 QA4 SMA 0.06 g 5000 Tape & reel SMP30-68 QAB SMP30-100 QAC SMP30-120 QAD SMP30-130 QAE SMP30-180 QAF SMP30-200 QAG SMP30-220 QAH SMP30-240 QAI SMP30-270 QAJ

ORDERING INFORMATION

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written ap- proval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com