SMP255FA5150MB31

SMP255 KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

1© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

• High dV/dt capability
• Impregnated paper that ensures excellent stability and reliability properties, particularly in applications with continuous operation
• Approvals: ENEC, cULus
• Rated voltage: 310 VAC 50/60 Hz, maximum recommended DC voltage 630 VDC
• Capacitance range: 10 – 150 nF
• Size code: 5045 (12.7 mm), 6560 (16.5 mm), 7067 (17.8 mm)
• Capacitance tolerance: ±20%
• Automotive (AEC-Q200) grade Overview Multilayer, metallized paper, encapsulated and impregnated in self-extinguishing material that meets the requirements of UL 94 V–0.

Applications

The capacitors are intended for use as interference suppressors in X2 (accross-the-line) applications. Class X2 Impregnated Metallized Paper EMI Suppression Capacitors SMP255, Class X2, 310 VAC SMD (Automotive Grade) Customer Part Number System SMP255 F A 5100 M B31 TR24 Series Rated Voltage (VAC) Chip Length (mm) Capacitance Code (pF) Capacitance Tolerance Box Packaging X2, Metallized Paper F = 310 A = 12.7 B = 16.5 C = 17.8 The last three digits represent significant figures. The first digit specifies the total number of digits. M = ±20% Box B31 = 5045 and 5026 chip sizes C31 = 6560 and 6528 chip sizes D32 = 7067 and 7040 chip sizes See Ordering Options Table KEMET Internal Part Number System P 106 YR 103 M 310 V Capacitor Class Series Chip Length (mm) Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VAC) Packaging P = Paper X2, Metallized paper YR = 12.7 ZS = 16.5 FK = 17.8 First two digits represent significant figures. Third digit specifies number of zeros. M = ±20% 310 = 310 See Ordering Options Table

2© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Benefits cont.

• Climatic category: 40/125/56/B, IEC 60068-1
• Tape & Reel packaging in accordance with IEC 60286–3
• RoHS compliance and lead-free terminations
• Operating temperature range of −40°C to +125°C
• 100% screening factory test at 2,150 VDC
• Highest possible safety regarding active and passive flammability
• Excellent self-healing properties ensure long life, even when subjected to frequent overvoltages
• Good resistance to ionization due to impregnated dielectric Ordering Options Table Chip Size (EIA) Packaging Type KEMET Packaging Code Legacy Packaging Code 5045, 6560 Tape & Reel (Horizontal Taping Orientation) V TR24

7067 Tape & Reel (Horizontal Taping Orientation) V TR32

5026 Tape & Reel (Vertical Taping Orientation) Y TV24

6528 Tape & Reel (Vertical Taping Orientation) Y TV44

7040 Tape & Reel (Vertical Taping Orientation) Y TV32

Dimensions – Millimeters Chip Size W T L F EIA Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance

3© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Performance Characteristics Rated Voltage 310 VAC 50/60 Hz Capacitance Range 1.0 – 150 nF Capacitance Tolerance ±20% (at room temperature) Temperature Range −40°C to +125°C Climatic Category 40/125/56/B Approvals ENEC, cULus Storage Conditions Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: -40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Dissipation Factor (tanδ) at 1 kHz Maximum Values at +23°C ≤ 1.3% Test Voltage Between Terminals The 100% screening factory test is carried out at 2,150 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. This test may not be repeated due to potential capacitor damage. KEMET is not liable for any failures that result from repeating the test. Insulation Resistance Between Terminals ≥ 12,000 MΩ 100 -40 -20 0 20 40 60 80 Relative Humidity (%) Temperature (°C) Maximum Humidity in Storage Condition

30 Days

4© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. Cleaning/Storage and Moisture Recommendations Cleaning Suggestions To clean the PCB assembly KEMET recommends to use a suitable solvent like Isopropyl alcohol, deionized water or neutral pH detergents. Aggressive solvents shall not be used. For any different cleaning solvent used please contact KEMET Technical Services to analyze the potential impact on KEMET products. Storage and Moisture Recommendations KEMET SMD film capacitors are supplied in a moisture barrier bag (MBB) Class 1. We can guarantee a 24 month shelf life (temperature ≤ 40°C/relative humidity ≤ 90%). After the MBB has been opened, components may stay in areas with controlled temperature and humidity (temperature ≤ 30°C/relative humidity ≤ 60%) for 168 hours (MSL 3). For longer periods of time and/or higher temperature and/or higher relative humidity values, it is absolutely necessary to protect the components against humidity. If the reel inside the MBB is partially used, KEMET recommends to re-use the same MBB or to avoid areas without controlled temperature and humidity (see above). If the above conditions are not respected, components require baking (minimum time: 48 hours at 55 ±5°C, ≤ 5% RH) before the reflow.

5© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Environmental Test Data Test Publication Procedure Impulse Voltage and Endurance IEC 60384-14 1.25 x VR VAC 50 Hz, once every hour increse to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature. Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each. 10 – 500 Hz at 0.75 mm or 98 m/s 2 Bump IEC 60068-2-27 Test Eb 4,000 bumps at 390 m/s 2 Rapid Change of Temperature IEC 60068-2-14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384-14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds) Passive Flammability IEC 60384-14 IEC 60695-11-5 Needle-flame test Humidity IEC 60068-2-3 Test Ca +40°C and 90 – 95% R.H. Damp Heat Steady State IEC 60068-2-78 Test Cab +40 ±2°C and 93 ±3% R.H., 56 days Operational Life Test AEC-Q200: MIL-STD-202 Method 108 100% of rated voltage above 85ºC. 1,000h/125ºC Humidity Bias Test AEC-Q200: MIL-STD-202 Method 103 Rated voltage. 1,000h. 40ºC/93%RH Temperature Cycling Test AEC-Q200: JESD22-A104 Unpowered. 1,000 cycles. 125ºC/-40ºC Approvals Certification Body Mark Specification File Number IMQ S.p.A. EN/IEC 60384-14 CA08.00240 UL UL 60384 and CAN/CSA E60384-14 E97797 Environmental Compliance All KEMET EMI capacitors are RoHS compliant.

6© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Table 1 – Ratings & Part Number Reference Chip Capacitance (nF) Maximum Dimensions in mm dV/dt (V/µs) KEMET Part Number Customer Part NumberL -0/+0.4 W -0/+0.6 T -0/+0.4 10 12.7 11.5 6.5 1,200 P106YR103M310(1) SMP255FA5100MB31(1) 12 12.7 11.5 6.5 1,200 P106YR123M310(1) SMP255FA5120MB31(1) 15 12.7 11.5 6.5 1,200 P106YR153M310(1) SMP255FA5150MB31(1) 18 12.7 11.5 6.5 1,200 P106YR183M310(1) SMP255FA5180MB31(1) 22 12.7 11.5 6.5 1,200 P106YR223M310(1) SMP255FA5220MB31(1) 27 12.7 11.5 6.5 1,200 P106YR273M310(1) SMP255FA5270MB31(1) 33 16.5 15.0 7.0 1,200 P106ZS333M310(1) SMP255FB5330MC31(1) 39 16.5 15.0 7.0 1,200 P106ZS393M310(1) SMP255FB5390MC31(1) 47 16.5 15.0 7.0 1,200 P106ZS473M310(1) SMP255FB5470MC31(1) 56 16.5 15.0 7.0 1,200 P106ZS563M310(1) SMP255FB5560MC31(1) 68 16.5 15.0 7.0 1,200 P106ZS683M310(1) SMP255FB5680MC31(1) 82 17.8 17.0 10.2 1,200 P106FK823M310(1) SMP255FC5820MD32(1) 100 17.8 17.0 10.2 1,200 P106FK104M310(1) SMP255FC6100MD32(1) 120 17.8 17.0 10.2 600 P106FK124M310(1) SMP255FC6120MD32(1) 150 17.8 17.0 10.2 600 P106FK154M310(1) SMP255FC6150MD32(1) Capacitance Value (nF) L (mm) W (mm) T (mm) dV/dt (V/µs) Customer Part Number KEMET Part Number (1) Insert packaging code. See Ordering Options Table for available options.

7© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Soldering Process Reflow soldering temperature is measured on the top body surface of the component. Use the recommended soldering profiles for convection reflow ovens and IR reflow ovens. If a vapor phase reflow oven is used, consult KEMET. Exceeding the manufacturer’s process recommendations may harm the component. KEMET is not liable for any defect caused by exceeding recommendations. According to international standards, the maximum temperature capability must be measured on the top surface of a component. The international standards do not define how the thermocouple should be fastened on the component. Our recommendation for attaching the thermocouple to the top surface of the component is to glue it with high temperature resistant glue or with thermo tape specified for reflow profiling. Compliant to lead-free reflow soldering process. Profile Feature Termination Finish 100% Matte Sn Preheat/Soak Temperature Minimum (T Smin) 150°C Temperature Maximum (T Smax) 200°C Time (ts) from TSmin to TSmax 60 - 120 seconds Ramp-Up Rate (T L to TP) 3°C/second maximum Liquidous Temperature (T L) 217°C Time Above Liquidous (t L) 60 - 150 seconds Peak Temperature (T P) 245°C Time Within 5°C of Maximum Peak Temperature (t P) 30 seconds maximum Ramp-Down Rate (T P to TL) 6°C/second maximum Time 25° to Peak Temperature 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the capacitor body surface that is facing up during assembly reflow. Temperature Sensor Position in Reflow Profiling For vertical capacitors profiling For horizontal capacitors profiling

8© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Soldering Land Dimensions L Case Size W Ah Av X mm Horizontal Vertical mils mm mils mm mils mm mils mm Ah = horizontal mounting Av = vertical mounting Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Rev. E Mechanical Stress Tests: Mechanical Shock MIL-STD-202 Method 213 Figure 1 of Method 213

• SMD: Condition C
• Tested per the Supplier’s recommended mounting method Vibration MIL-STD-202 Method 204
• 5 g for 20 minutes, 12 cycles each of 3 orientations
• Tested per the Supplier’s recommended mounting method
• Verification of transfer load: during setup, verify that with the selected PCB design (size, thickness and secure points), or an alternative mount, that the transferred load onto the component corresponds to the requested load. This verification can be achieved using a laser vibrometer or other adequate measuring device.
• Test from 10 Hz – 2,000 Hz.

9© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Construction Molded Plastic Case Molded Plastic Case Self-Extinguishing Resin Terminals Metal Contact Layer Metal Contact Layer Metallized Impregnated Paper (First Layer) Metallized Impregnated Paper (Second Layer) Margin Detailed Cross Section Leadframe Margin

10© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Marking Series Approvals Rated VoltageCapacitor Class Manufacturer’s Logo Date Code Manufacturing Plant Code Manufacturing Plant & Date Code (IEC 60062) Year Digit 2 Month Digit 3

2020 M January 1

2021 N February 2

2022 P March 3

2023 R April 4

2024 S May 5

2025 T June 6

2026 U July 7

2027 V August 8

2028 W September 9

2029 X October O

2030 A November N

2031 B December D

(mm) Height (mm) Length (mm) Packing Quantity 5045 Horizontal 6.5 11.5 12.7 600 5026 Vertical 11.5 6.5 12.7 400 6560 Horizontal 7.0 15.0 16.5 500 6528 Vertical 15.0 7.0 16.5 200 7067 Horizontal 10.2 17.0 17.8 270 7040 Vertical 17.0 10.2 17.8 200

11© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) Carrier Taping & Packaging (IEC 60286–3) Horizontal Taping Orientation 4.0 ±0.1 P1 A0 Direction of Unreeling Ø1.5 +0.1 2.0 ±0.05 1.75 ±0.1 W EIA Size Code Horizontal Mounting Dimensions in mm Taping Specification B H L W P1 A0 B0 K0 D W1 W2 Nominal Nominal Nominal −0/+0.3 +/−0.1 Nominal Nominal Nominal ±2.0 −0/+2 Maximum **Double sprocket holes. Vertical Taping Orientation Side View W EIA Size Code Vertical Mounting Dimensions in mm Taping Specification B* H* L W P1 A0 B0 K0 D W1 W2 Nominal Nominal Nominal −0/+0.3 +/−0.1 Nominal Nominal Nominal ±2.0 −0/+2 Maximum *Dimensions B and H in vertical mounting correspond to H and B in the standard mounting and in the article tables. **Double sprocket holes. D D

12© KEMET Electronics Corporation • One East Broward Boulevard F3143_SMP255_X2_310_125C • 5/7/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Class X2 Impregnated Metallized Paper EMI Suppression Capacitors – SMP25, Class X2, 310 VAC SMD (Automotive Grade) KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. Additional information about production site flexibility can be found < here>