SMP1307 SKYWORKS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- Low distortion design
- Frequency range from HF to > 2 GHz
- Designed for CATV AGC applications
- Designed for high volume wireless applications
Description
The SMP1307 series of plastic packaged, surface mountable, low capacitance (0.3 pF) silicon PIN diodes are designed for use in attenuator applications from 5 MHz to beyond 2 GHz. The thick 175 µm I region of these PIN diodes makes them very attractive for use in very low distortion PI and TEE attenuators commonly used in TV distribution applications. The 1.5 µs typical carrier life- time of these diodes results in resistance of 100 Ω maximum at 1 mA and 10 Ω maximum at 10 mA. Available in a selection of plastic packages, as a single diode in the small footprint SOD-323, and in a variety of configurations in the SOT-23. Also available in a SOT-5 (SMP1307-027) package as a four diode array designed for insertion in the commonly used 4 diode PI attenuator circuit. Characteristic Value Reverse voltage (VR) 200 V Power dissipation @ 25 °C lead 250 mW temperature (PD) Storage temperature (TST) -65 °C to +150 °C Operating temperature (TOP) -65 °C to +150 °C ESD human body model Class 1C Absolute Maximum Ratings Common Single Cathode Series Pair Single PI SOT-23 SOT-23 SOT-23 SOD-323 SOT-5 SMP1307-001 SMP1307-004 SMP1307-005 SMP1307-011 SMP1307-027 Marking: PJ1 Marking: PJ3 Marking: PJ2 Marking: PJ Marking: PJM SMP1307-001LF SMP1307-004LF SMP1307-005LF SMP1307-011LF Marking: RJ1 Marking: RJ3 Marking: RJ2 Marking: RJ LS = 1.5 nH L S = 1.5 nH L S = 1.5 nH L S = 1.5 nH LF denotes lead (Pb)-free packaging option as an alternative to our standard tin/lead (Sn/Pb) packaging. Skyworks offers lead (Pb)-free “environmentally friendly” packaging that is RoHS compliant (European Parliament for the Restriction of Hazardous Substances). NEW Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com October 26, 2004 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. 200045 Rev. A DATA SHEET • SMP1307 SERIES Series Resistance vs. Current @ 100 MHz 0.01 0.1 1 10 100 Forward Current (mA) Series Resistance (Ω) 0.1 100 1000 10000 0 1 2 5 10 20 100 50 Capacitance vs. Reverse Voltage 0.2 0.4 0.6 0.1 0.3 0.5 0.7 0.8 Reverse Voltage (V) Capacitance (pF)100 MHz
1 MHz
1 GHz
400 500 600 700 800 900 1000 DC Characteristic 0.01 0.1 100 Forward Voltage (mV) Forward Current (mA) 0 500 1000 1500 2000 Conductance vs. Frequency and Reverse Voltage Frequency (MHz) Conductance (µS) 100 150 200 250 300 350 400 0 V 10 V 40 V Typical Performance Data Parameter Condition Typ. Max. Unit Reverse current (IR)V R = 200 V 10 µA Capacitance (CT)(1) F = 1 MHz, V = 30 V 0.30 pF Resistance (RS) F = 100 MHz, I = 1 mA 75 100 Ω Resistance (RS) F = 100 MHz, I = 10 mA 15 Ω Resistance (RS) F = 100 MHz, I = 100 mA 3.0 Ω Forward voltage (VF)I F = 10 mA 0.85 V Carrier lifetime (TI) I F = 10 mA 1.5 µs I region width 175 µm Electrical Specifications at 25 °C 1. The SMP1307-027 maximum capacitance is 0.45 pF.
DATA SHEET SMP1307 SERIES Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200045 Rev. A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. October 26, 2004 3 RRR R R (mA) ( ΩΩ)( ΩΩ)( ΩΩ)( ΩΩ)( ΩΩ) Typical Resistance vs. Temperature @ 100 MHz SMP1307-027 4 Diode PI Attenuator The SMP1307-027 employs 4 PIN diode junctions in a 5-lead SOT package. It is configured for ease of insertion in the PI attenuator circuit commonly used for broadband TV distribution systems, covering a frequency range from 5 MHz to beyond 1 GHz. A broadband attenuator was designed using the SMP1307-027 showing good performance to 2 GHz. The attenuator was evalu- ated with a 50 Ω source and load impedance. The following figure shows the circuit diagram and measured performance. 10,000 pF 10,000 pF 10,000 pF 10,000 pF 10,000 pF 10,000 pF 1 k 1 k R3 1 k 560 1 k 560 VTUNE 0–20 V VREF 5 V RF Output RF Input 123 A 4 diode PI attenuator utilizing individual SMP1307-011 PIN diodes is described in the “A Wideband General Purpose PIN Diode Attenuator” Application Note. D1–D4 SMP1307-027
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com October 26, 2004 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. 200045 Rev. A DATA SHEET SMP1307 SERIES TP TSMAX TSMIN ts Preheat tp Critical Zone TL to TL t 25 ˚C to Peak Time Temperature TL 25 ˚C Reference JEDEC J-STD-020 IL Profile Feature SnPb Eutectic Assembly Lead (Pb)-Free Assembly 100% Sn Average ramp-up rate (TL to TP) 3 °C/second max. 3 °C/second max. Preheat Temperature min. (TSMIN) 100 °C 150 °C Temperature max. (TSMAX) 150 °C 200 °C Time (min. to max.) (ts) 60–120 seconds 60–80 seconds TSMAX to TL Ramp-up rate — 3 °C/second max. Time maintained above: Temperature (T L) 183 °C 217 °C Time (tL) 60–150 seconds 60–150 seconds Peak temperature (TP) 240 +0/-5 °C 250 +0/-5 °C Time within 5 °C of actual peak temperature (tp) 10–30 seconds 20–40 seconds Ramp-down rate 6 °C/second max. 6 °C/second max. Time 25 °C to peak temperature 6 minutes max. 8 minutes max. Recommended Solder Reflow Profiles All temperatures refer to the topside of the package, measured on the package body surface. Reference JEDEC J-STD-020B.
DATA SHEET SMP1307 SERIES Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200045 Rev. A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. October 26, 2004 5 SOD-323 0.090 (2.30 mm) Min. 0.108 (2.74 mm) Max. 0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max. 0.050 (1.25 mm) Max. 0.006 (0.15 mm) Typ. 0.008 (0.20 mm) Nom. 0.004 (0.10 mm) Max. 0.010 (0.25 mm) Min. 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. 0.063 (1.60 mm) Min. 0.071 (1.80 mm) Max.Cathode Indicator SOT-23 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 8˚ Max. 0.022 (0.55 mm) Ref. 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. 0.037 (0.95 mm) Ref. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 0.076 (1.92 mm) Ref. 0.020 (0.51 mm) Ref. SOT-5 0.110 (2.79 mm) Min. 0.118 (3.00 mm) Max. 0.014 (0.36 mm) Min. 0.020 (0.51 mm) Max. 0.102 (2.59 mm) Min. 0.118 (3.00 mm) Max. 0.060 (1.52 mm) Min. 0.069 (1.75 mm) Max. 0.037 (0.94 mm) Ref. 0.037 (0.94 mm) Ref. 12 3 0.004 (0.10 mm) Min. 0.024 (0.61 mm) Max. 0.134 (3.4 mm)10˚ Max. 0.035 (0.89 mm) Min. 0.057 (1.49 mm) Max. 0.000 (0.00 mm) Min. 0.006 (0.15 mm) Max. 0.035 (0.89 mm) Min. -40 -30 -20 -10 0 0.5 1.0 1.5 2.0 Frequency (GHz) Attenuation (dB) VCTL = 20 V VCTL = 15 V VCTL = 10 V VCTL = 5 V VCTL = 0 V SMP1307-027 Attenuation vs. Frequency
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com October 26, 2004 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. 200045 Rev. A DATA SHEET SMP1307 SERIES Copyright © 2002, 2003, 2004, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products, specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions. THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. The following are trademarks of Skyworks Solutions, Inc.: Skyworks™, the Skyworks logo, and Breakthrough Simplicity™. Product names or services listed in this publication are for identification purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at www.skyworksinc.com, is incorporated by reference.