SMP1302-074LF SKYWORKS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

  • Designed for base station and handset applications
  • Low-distortion design
  • Available in tape and reel packaging
  • Packages rated MSL1 @ 260 °C per JEDEC J-STD-020

Description

The SMP1302 series of plastic packaged, surface mountable, low capacitance (0.3 pF) silicon PIN diodes is designed for high- volume switch and attenuator applications from 10 MHz to beyond 10 GHz. These diodes are designed for use in low -distortion PI and TEE attenuators with low drive current (maximum resistance at 1 mA is 10 Ω) commonly used in TV distribution and cellular base station applications. The nominal 50 μm I region width, combined with a maximum resistance of 3 Ω at 10 mA, makes these diodes useful in large signal switch applications. The SMP1302 series provides single, dual, and quad diodes in a selection of plastic packages including SOT-23, SOD-323, SC-79, an ultralow inductance (0.2 nH) SOT-143 (SMP1302-017), SC-70, SC-88, and a small footprint SOD -882. A four-diode array is available in an SOT-5 package (SMP1302- 027) designed for insertion in the commonly used four-diode PI attenuator circuits. Table 1 describes the various packages and marking of the SMP1302 series.

Table 1. SMP1302 Series Packaging and Marking Select Linear Products (indicated by ♦) now available for purchase online. Figure 1. SOT-143 Package quad common cathode package. Table 4. Resistance versus temperature measurements are provided in Figures 7 to 21 (odd numbers).

Table 2. SMP1302-078LF Pin Signals

1 Anode 1 4 Anode 3

2 Common cathode 5 Common cathode

3 Anode 2 6 Anode 4

Table 3. SMP1302 Series Absolute Maximum Ratings parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. SMP1302 series PIN diodes are Class 1C ESD devices. Table 4. SMP1302 Series Electrical Specifications (Note 1) Note 1: Performance is guaranteed only under the conditions listed in this Table. Note 2: The SMP1302-017 and SMP1302-027 maximum capacitance is 0.45 pF. moisture after the container seal is broken must be followed. (MSL1) at 260 °C. It can be used for lead or lead-free soldering. Solder Reflow Information, document number 200164. done manually or in a production solder reflow environment.

DATA SHEET • SMP1302 SERIES PIN DIODES Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200043R • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 26, 2012 13 Copyright © 2002-2011, 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no r esponsibility for errors or omissions in these materials or the information contained herein. Skyworks may c hange its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks mak es no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilitie s, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this docume nt. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life -sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications d o so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and o ther risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resultin g from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, I nc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Skyworks: SMP1302-003LF SMP1302-040LF SMP1302-074LF SMP1302-075LF