SMN7103H MICRONETICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MICRONETICS, HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 / NOISESALES@MICRONETICS.COM WWW.MICRONETICS.COM SMN7103H 1/2 INCH SURFACE MOUNT AMPLIFIED NOISE SOURCE 100 HZT O 500 KHZ DDESCRIPTIONESCRIPTION The SMN7103H noise module is designed for a wide range of applications. It features high noise output amplitude for uses ranging from encryption to baseband signal simulation. All biasing and amplification circuitry is built-in making it easy to design into your system. It features a built-in voltage regulator for highly stable output even if your DC supply lines are not. SSUITUIT ABLEABLE FORFOR HHIGHIGH VVOLUMEOLUME PPRODUCTSRODUCTS :: The SMN7103H noise sources being surface mount, having a small footprint and available on tape and reel, make them ideal for production manufacturing. Traditionally packaged noise sources have been large and costly rendering them less suitable for all but the more expensive, exotic systems. Noise can now be thought of as lower cost, more reliable, smaller and an easier to implement alternative to costly microprocessor based solutions such as PN generators, arbtrary waveform generators and DSP processors. SSPECIFICAPECIFICA TIONSTIONS
- Frequency: 100 Hz to 500 kHz
- Impedance: 1100 ohm
- Noise Power (N): -8 dBm
- Bias: 12 Vdc (Internally Regulated)
- Peak Factor: 5:1
- Amplitude: V P-P = 2.0 (min), 2.4 (typ) VRMS = 100mV (min) 120mVRMS (typ)
- Current Draw: 15mA (max)
- Operating Temp: -55 to +85 C
- Storage Temp: -55 to +125 C SMN7103 TYPICAL DATA APPLICATION NOTE 7103H CCOMMONOMMON NNOISEOISE AAPPLICAPPLICA TIONSTIONS 1. Baseband Signal Simulation: Signal impariments can be modeled by using a noise source where ever a Gaussian process is required. By feeding the output of the noise source into the control lines of devices such as attenuators, phase shifters or the LO port of a mixer, one can simulate various impairments such as rain fade, Rayleigh fading, etc.... 2. Random Number Generation for Encryption: Noise sources being truly random (not pseudorandom) give the ultimate in secure communication because of their ability to gen- erate a truly random number pattern. This can be used to seed an encryption key for authen- tication. The noise signal can be fed directly into an A/D converter for sampling or a simpler techniques might use a comparator. Further shaping of the noise is often employed whether by analog techniques if in front of the A/D converter or afterwards using DSP. Note: Data measured in 50 ohm load impedance. Add 14 dB to this amplitude data for 1000 ohm load impedance.
MICRONETICS, HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 / NOISESALES@MICRONETICS.COM WWW.MICRONETICS.COM SMN7103H SURFACE MOUNT AMPLIFIED NOISE SOURCE 100 HZT O 500 KHZ HOW TO ORDER PACKAGE OUTLINE DRAWING USEFUL NOISE EQUATIONS Converting ENR to noise spectral density (N0): 0 dB ENR = -174 dBm/Hz Calculating noise power in a given bandwidth (BW) from noise spectral density: Power (dBm)=N 0+10Log(BW) Calculating VRMS from noise power and impedance: VRMS=10 [N + 10Log(R)-30dB]/20 Calculating noise power from VRMS and impedance: N=20Log (VRMS)-10Log(R)+30 dB Where: N=Power in dBm R=Impedance in ohms BW=Bandwidth in Hz N 0=Power Spectral Density in dBm/Hz Model # S M N 7 1 0 3 H - D 1 C Indicate Bulk or Tape and Reel when ordering in quantity Model # S M N 7 1 0 3 H - D 1 C - E V A L For populated evaluation board