SMLC65C-2 PROTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

SMLC6.5C-2 thru SMLC12C-2 05105.R4 3/05 www.protekdevices.com LOW CAPACITANCE TVS ARRAY Only One Name Means ProTek’Tion™

APPLICATIONS

✔ T1/E1 ✔ RS-422, RS-423 & RS-485 ✔ SDH/SONET, ATM Equipment & Systems ✔ Industrial Controls & Monitoring ✔ Cable Modem Intra-Building Protection IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 8/20µs - 95A, L4(Line-Gnd) & 48A, L4(Line-Line) & 83A, L2(Power)

FEATURES

✔ 3,600 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ 600 Watts Peak Pulse Power per Line (tp=10/1000µs) ✔ 100A (2/10µs) per Bellcore GR-1089 (Intra-Building) ✔ Bidirectional Configuration ✔ High Surge Capability: 80A (10/1000µs) ✔ Available in 2 Voltages: 6.5V & 12V ✔ Protects Two (2) Bidirectional Lines ✔ LOW CAPACITANCE: < 30pF per LINE PAIR ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-16 Package ✔ Weight 0.15 grams (Approximate) ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package SO-16 05105 PIN CONFIGURATION

www.protekdevices.com 05105.R4 3/05 SMLC6.5C-2 thru SMLC12C-2 GRAPHS FIGURE 7 RETURN LOSS - SMLC6.5C-2

100 MHz per Division

-50 db -20 db Ref 0 db 20 db FIGURE 6 INSERTION LOSS - SMLC6.5C-2 -50 db -20 db Ref 0 db 20 db 0 10 20 30 40 IPP - Peak Pulse Current - Amps VC - Clamping Voltage - Volts FIGURE 5 TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURRENT FOR SMLC6.5C-2 0 25 50 75 100 125 150 TL - Lead Temperature - °C 100 % Of Rated Power Peak Pulse Power 10/1000µs Average Power FIGURE 3 POWER DERATING CURVE FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR SMLC6.5C-2 ESD Test Pulse: 5 kilovolt, 1/30ns (waveform)

5 Volts per Division

effects of ESD or EFT. This product series has a surge capability of 600 Watts PPP per line for an 10/1000µs waveform and ESD protection > 40kV. protection in a differential-mode T1/E1 application as depicted in Figure 1. Line 1 is connected to Pins 1, 2, 15 & 16. Line 2 is connected to Pins 3, 4, 13 & 14. Line 3 is connected to Pins 5, 6, 11, & 12. Line 4 is connected to Pins 7, 8, 9 & 10. can be coupled into the nearby traces. protected line should be minimized. possible. For multilayer PCBs, use ground vias. Figure 1. Differential-Mode Protection For T1/E1 Applications

www.protekdevices.com 05105.R4 3/05 SMLC6.5C-2 thru SMLC12C-2 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. PACKAGE OUTLINE & DIMENSIONS ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com A B C D F G J K P R 10.00 4.00 1.75 0.49 1.25

1.27 BSC

0.25 0.25 6.20 0.50 0.386 0.150 0.054 0.014 0.016

0.05 BSC

0.008 0.004 0.229 0.010 0.393 0.157 0.068 0.019 0.049 0.009 0.009 0.244 0.019 9.80 3.80 1.35 0.35 0.40 0.19 0.10 5.80 0.25 DIM MIN MAX MIN MAX MILLIMETERS INCHES PACKAGE DIMENSIONS NOTES 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. PACKAGE OUTLINE SO-16 MOUNTING PAD M -A- -B- P D G -T- K C J R X 45º F 0.010” (0.25 MM) M B M 8 PL 0.010” (0.25 MM) S B M 16 PL T A S 0º - 7º 0.050” TYP 0.030” ± 0.005” 0.245” MIN 0.160” ± 0.005” 0.045” ± 0.005” TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape, i.e., SMLC6.5C-2-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape, i.e., SMLC6.5C-2-T13. 4. Suffix- LF = Lead-Free, Pure-Tin Plating, i.e., SMLC6.5C-2-LF-T7. 5. No Suffix = Product Shipped in Tubes of 37 pcs per Tube. Outline & Dimensions: Rev 1 - 11/01, 06007