SMF90A

SMF5.0A_10 PANJIT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PAGE . 1May 04.2010-REV.00 SMF5.0A~SMF170A SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE 5.0 to 170 Volts 200 Watts

FEATURES

• For surface mounted applications in order to optimize board space.
• Low profile paceage
• Built-in strain relief
• Low inductance
• High temperature soldering : 260 OC/10 seconds at terminals
• In compliance with EU RoHS 2002/95/EC directives MECHANICAL DATA
• Case: JEDEC DO-219AB,Molded plastic over passivated junction.
• Terminals: Solderable per MIL-STD-750, Method 2026
• Polarity: Color band denotes positive end (cathode)
• Weight: 0.0006 ounce, 0.0172 gram
• Standrad Packaging : 8mm tape (EIA-481) CURRENT MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 OC ambient temperature unless otherwise specified. Rating Symbol Value Units Peak Pulse Power Dissipation on T A = 25 OC (Notes 1,2,5, Fig.1) P PPM 200 Watts Peak Forward Surge Current per (Note 3) I FSM 20 Amps Peak Pulse Current on 10/1000s waveform(Note 1)Fig.2 I PPM see T able 1 Amps Steady State Power Dissipation (NOTE 4) P M(AV) 1.0 Watts Operating Junction and Storage T emperature Range T J,TSTG -55 to +150 OC Thermal resistance R θJA 180 OC NOTES : 1.Non-repetitive current pulse, per Fig.3 and derated above T A=25 OC per Fig.2 . 2.Mounted on 5.0mm 2 copper pads to each terminal. 3.8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minutes maximum. 4.lead temperature at 75 OC =T L . 5.Peak pulse power waveform is 10/1000 μs. 1 2 Cathode Anode

PAGE . 2May 04.2010-REV.00 SMF5.0A~SMF170A Part Number VRWM VBR @ I T IR @ VRWM VC @ IPP Marking CodeMin. Max. IT V V V mA μA V A 200W Transient Voltage Suppressor SMF5.0A 5 6.4 7 10 400 9.2 21.7 HE SMF7.0A 7 7.8 8.6 10 100 12 16.7 HM SMF9.0A 9 10 11.1 1 5 15.4 13 HV SMF10A 10 11.1 12.3 1 2.5 17 11.8 HX SMF11A 11 12.2 13.5 1 2.5 18.2 11 HZ SMF13A 13 14.4 15.9 1 1 21.5 9.3 IG SMF14A 14 15.6 17.2 1 1 23.2 8.6 IK SMF15A 15 16.7 18.5 1 1 24.4 8.2 IM SMF16A 16 17.8 19.7 1 1 26 7.7 IP SMF17A 17 18.9 20.9 1 1 27.6 7.2 IR SMF18A 18 20 22.1 1 1 29.2 6.8 IT SMF20A 20 22.2 24.5 1 1 32.4 6.2 IV SMF22A 22 24.4 26.9 1 1 35.5 5.6 IX SMF24A 24 26.7 29.5 1 1 38.9 5.1 IZ SMF26A 26 28.9 31.9 1 1 42.1 4.8 JE SMF28A 28 31.1 34.4 1 1 45.4 4.4 JG SMF30A 30 33.3 36.8 1 1 48.4 4.1 JK SMF33A 33 36.7 40.6 1 1 53.3 3.8 JM SMF36A 36 40 44.2 1 1 58.1 3.4 JP SMF40A 40 44.4 49.1 1 1 64.5 3.1 JR SMF43A 43 47.8 52.8 1 1 69.4 2.9 JT SMF45A 45 50 55.3 1 1 72.7 2.8 JV SMF48A 48 53.3 58.9 1 1 77.4 2.6 JX SMF51A 51 56.7 62.7 1 1 82.4 2.4 JZ SMF54A 54 60 66.3 1 1 87.1 2.3 RE SMF58A 58 64.4 71.2 1 1 93.6 2.1 RG SMF60A 60 66.7 73.7 1 1 96.8 1.8 RK SMF64A 64 71.1 78.6 1 1 103 1.7 RM SMF70A 70 77.8 86 1 1 113 1.5 RP SMF75A 75 83.3 92.1 1 1 121 1.4 RR SMF78A 78 86.7 95.8 1 1 126 1.4 RT SMF85A 85 94.4 104 1 1 137 1.3 RV SMF90A 90 100 111 1 1 146 1.2 RX SMF100A 100 111 123 1 1 162 1.1 RZ SMF110A 110 122 135 1 1 177 1 SE SMF120A 120 133 147 1 1 193 0.9 SG SMF130A 130 144 159 1 1 209 0.8 SK SMF140A 150 167 185 1 1 243 0.7 SM SMF160A 160 178 197 1 1 259 0.7 SP SMF170A 170 189 209 1 1 275 0.6 SR

PAGE . 3May 04.2010-REV.00 SMF5.0A~SMF170A Fig.1 PEAK PULSE POWER RATING CURVE Fig.2 DERATING CURVE Fig.3 PULSE WAVEFORM Fig.5 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT Fig.4 TYPICAL JUNCTION CAPACITANCE td ,PULSE WIDTH, micro sec T,TIME,ms NUMBER OF CYCLES AT 60Hz T ,AMBIENT TEMPERATURE, CA O 0.1 0.1 1.0 Non-Repetitve Pulse Waveform Shown in Figure.3 T= 2 5C A O 1.0 100 100 1000 10000 P ,PEAK PULSE FORWARD ,KW PPM I ,PEAK PULSE CURRENT,%PPM I , PEAK FORWARD SURGE CURRENT, AMPERES FSM PEAK PULSE FORWARD (P ) OR CURRENT (I ) DERATING IN PERCENTAGE % PP PP 100 125 150 175 20025 50 75 1000 0 1.0 2.0 3.0 4.0 100 150 Half V alue-Ipp e-kt td T= 2 5 C Pulse Width (td) is Defined as the Point where the Peak Current Decayst to 50% of Ipp A Otf = 10usec Peak Value Ippm C J,C A P A C I T A N C E,p F 1.0 2.0 5.0 10 20 50 100 200 Measured a t Ze ro Bia s TJ =2 5 C O f= 1.0MHZ Vsig = 50m Vp -p 10,000 1,000 100 V ( R W M ),R E V E R S ES T A N D - O F FV O L T A G E,V O L T S Measured a t St a n d - O f f Vo l t a g e (V ) RWM 2 4 10 20 40 10001 T =T MAX 8.3ms Single Half Sine-Wave JEDEC Method JJ 10/1000 msec Waveform as Defined by R.E.A.

PAGE . 4 MOUNTING PAD LAYOUT

• Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel ORDER INFORMATION LEGAL STATEMENT Copyright PanJit International, Inc 2010 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. SMF5.0A~SMF170A May 04.2010-REV.00