SMF90

SMF5.0 JUXING | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

For surface mounted applications in order to optimize board space Low profile space Glass passivated chip Low inductance Excellent clamping capability Very fast response time Typical I D less than 1µA at V WM

200 W peak pulse power capability

with a 10/1000 µs waveform Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date Case: JEDEC SOD-123FL molded plastic over passivated chip Terminals: Solder plated, solderable per MIL-STD-750 Method 2026 Polarity: For uni-directional types the band by laser denotes the cathode, which is positive with respect to the anode under normal TVS operation Maximum Ratings & Thermal Characteristics & Electrical Characteristics A = 25 °C unless otherwise noted) Symbol P PPM I PPM V F I FSM T J T STG Notes: 1.Non-repetitive current pulse and derated above T A =25℃ 2.Mounted on 5.0mm copper pads to each terminal. VALUE UNIT Peak pulse power dissipation with a 10/1000µs waveform (Note1,2) 200 W Peak forward surge current 8.3ms single half sine-wave 20 A Peak pulse current 10/1000μS waveform(Note 1) See Next Table A Forward voltage @IF=200mA 1.25 V Operating junction and storage temperature range –55 to +150 °C http://www.trr-jx.com

TVS: SMF5.0 thru SMF170 A Glass Passivated TVS

Electrical Characteristics

A = 25 °C unless otherwise noted) Test Current Stand- off Voltage I T (mA) V WM (V) 10 5.0 10 5.0 10 6.0 10 6.0 10 6.5 10 6.5 10 7.0 10 7.0 1.0 7.5 1.0 7.5 1.0 8.0 1.0 8.0 1.0 8.5 1.0 8.5 1.0 9.0 1.0 9.0 1.0 10 1.0 10 1.0 11 1.0 11 1.0 12 1.0 12 1.0 13 1.0 13 1.0 14 1.0 14 1.0 15 1.0 15 1.0 16 1.0 16 1.0 17 1.0 17 1.0 18 1.0 18 1.0 20 1.0 20 1.0 22 1.0 22 1.0 24 1.0 24 1.0 26 1.0 26 1.0 28 1.0 28 1.0 30 1.0 30 Notes: For bi-directional devices, use suffix C or CA g . SMF5.0C, SMF5.0CA . Electrical characteristics a pp l y in both directions. (2) I T pulse test：tp≤5.0mS Sur g e current waveform 10 / 1000 μS. (4) For bidirectional types with V WM of 10 volts and less, the I D limit is doubled. TRR House No. Marking Code Breakdown Voltage at I T (2) V (BR) (V) Maximum Reverse Leakage at V WM (4) Maximum Peak Pulse Surge Current (3) Maximum Clamping Voltage at I PPM UNI UNI Min Max I D (µA) I PPM (A) V C (V) 4.40 45.4 SMF28A 1.0 MG 31.10 34.40 http://www.trr-jx.com

TVS: SMF5.0 thru SMF170 A Glass Passivated TVS A = 25 °C unless otherwise noted) Test Current Stand- off Voltage I T (mA) V WM (V) 1.0 33 1.0 33 1.0 36 1.0 36 1.0 40 1.0 40 1.0 43 1.0 43 1.0 45 1.0 45 1.0 48 1.0 48 1.0 51 1.0 51 1.0 54 1.0 54 1.0 58 1.0 58 1.0 60 1.0 60 1.0 64 1.0 64 1.0 70 1.0 70 1.0 75 1.0 75 1.0 78 1.0 78 1.0 85 1.0 85 1.0 90 1.0 90 1.0 100 1.0 100 1.0 110 1.0 110 1.0 120 1.0 120 1.0 130 1.0 130 1.0 150 1.0 150 1.0 160 1.0 160 1.0 170 1.0 170 Notes: For bi-directional devices, use suffix C or CA g . SMF5.0C, SMF5.0CA . Electrical characteristics a pp l y in both directions. (2) I T pulse test：tp≤5.0mS Sur g e current waveform 10 / 1000 μS. (4) For bidirectional types with V WM of 10 volts and less, the I D limit is doubled. ML MM MN MP MQ MR MS MT TRR House No. Marking Code Breakdown Voltage at I T (2) V (BR) (V) Maximum Reverse Leakage at V WM (4) Maximum Peak Pulse Surge Current (3) Maximum Clamping Voltage at I PPM Max I D (µA) I PPM (A) V C (V) UNI UNI Min SMF33A 36.70 40.60 MU SMF36A 40.00 44.20 SMF40 SMF40A 49.10 SMF36 40.00 48.90 1.0 44.40 1.0 3.80 53.3 3.06 64.3 1.0 3.40 58.1 1.0 2.90 69.4 1.0 1.0 3.10 64.5 SMF43A 47.80 52.80 MX SMF45 50.00 61.10 SMF48 SMF48A 58.9053.30 2.55 80.3 SMF45A 50.00 55.30 MW MV 1.0 2.80 72.7 1.0 2.40 82.4 MY 1.0 2.60 77.4 SMF51A 56.70 62.70 ND SMF54 60.00 73.30 MZ 1.0 2.10 96.3 SMF58 64.40 78.70 1.0 2.00 103 NF SMF60 66.70 81.50 1.0 1.90 107 NH SMF64 71.10 86.90 1.0 1.79 114 NL SMF64A 71.10 78.60 NM 1.0 2.00 103 SMF70 77.80 95.10 1.0 1.65 125 NN SMF70A 77.80 86.00 NP 1.0 1.80 113 SMF75 83.30 102.0 1.0 1.55 134 NQ SMF75A 83.30 92.10 NR 1.0 1.70 121 SMF78 86.70 106.0 1.0 1.45 139 NS SMF78A 86.70 95.80 NT 1.0 1.60 126 SMF85 94.40 115.0 1.0 1.34 151 NU SMF85A 94.40 104.0 NV 1.0 1.50 137 SMF90 100.0 122.0 1.0 1.30 160 NW SMF90A 100.0 111.0 NX 1.0 1.40 146 SMF100 111.0 136.0 1.0 1.14 179 NY SMF100A 111.0 123.0 NZ 1.0 1.30 162 SMF110 122.0 149.0 1.0 1.04 196 PD SMF110A 122.0 135.0 PE 1.0 1.20 177 SMF120 133.0 163.0 1.0 0.95 214 PF SMF120A 133.0 147.0 PG 1.0 1.00 193 SMF130 144.0 176.0 1.0 0.89 231 PH SMF130A 144.0 159.0 PK 1.0 1.00 209 SMF150 167.0 204.0 1.0 0.75 268 PL SMF150A 167.0 185.0 PM 1.0 0.80 243 SMF160 178.0 218.0 1.0 0.75 287 PN SMF160A 178.0 197.0 PP 1.0 0.80 259 SMF170 189.0 231.0 1.0 0.65 304 PQ 1.0 0.70 275 SMF170A 189.0 209.0 PR http://www.trr-jx.com

TVS: SMF5.0 thru SMF170 A Glass Passivated TVS Characteristic Curves A =25 ℃ unless otherwise noted) http://www.trr-jx.com