SMF9.0CA

SMF5.0A CHENDA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

For surface mounted applications in order to optimize board space. Low profile package Glass passivated junction Low inductance Plastic package has Underwriters Laboratory Flammability Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 200 Watts Mechanical Data Case: JEDEC 6OD-123FL molded plastic body Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Polarity symbol marking on body Mounting Position: Any Weight : 0.007 ounce, 0.02 grams Marking : Date Code and Marking Code See Page 3 Maximum Ratings and Electrical characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Symbol Value Unit PPPM 200 W IFSM (UNI) 20 A IPPM see Table 1 NOTES 1. Non-repetitive current pulse per Fig 3 and derated above T A=25°C per Fi g 2 2. Mounted on 5mm copper pads to each terminal 3. 8.3ms single half sinewave, or equivalent square wave duty cycle=4 pulses per minutes maximum 4. lead temperature at T L 5. Peak pulse powe. waveform is tp=10/1000us 6. A transient suppressor is selected according to the working peak reverse voltage(V RWM ), Which Should be equal to or greater than the DC or continuous peak operating voltage level =75°C A PM(AV) 1 W Parameter Peak Pulse Power Dissipation on TA=25 °C (Note 1,2,5, Fig1) Pea k Forward Surge Current (Note 3) Peak Pulse Current on 10/1000 us waveform (Note 1) Fig 2 Steady State Power Dissipation (Note 4) Operating Junction and Storage Range TJ,TSTG Typical Thermal Resistance RθJA -55 to +150 180 °C/W Dimensions in inches and (millimeters) SOD-123FL 0.154(3.90) 0.141(3.60) 0.035(0.90) 0.028(0.70) 0.008(0.20) 0.005(0.12) 0.043(1.10) 0.035(0.90) 0.114(2.90) 0.102(2.60) 0.031 (0.08) 0.043 (1.10) 0.075(1.90) 0.067(1.70)

Rev:2019A0 Page :2https://www.microdiode.com SMF5.0(C)A THRU SMF440(C)A Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 200 Watts Characteristics at Ta = 25°C Table 1 Breakdown Voltage Test Current Reverse Leakage Max. Clamp Voltage Peak Pulse Current IT mA μA IR @ VRWM VC @ IPP IPP V A VRMW VBR @ IT Min Max V V V Type Marking SMF5.0A SMF6.0A SMF6.5A SMF7.0A SMF7.5A SMF8.0A SMF8.5A SMF9.0A S M F l 0 A S M F 11 A S M F 1 2 A S M F 1 3 A S M F 1 4 A S M F 1 5 A S M F 1 6 A S M F 1 7 A S M F 1 8 A S M F 2 0 A S M F 2 2 A S M F 2 4 A S M F 2 6 A S M F 2 8 A S M F 3 0 A S M F 3 3 A S M F 3 6 A S M F 4 0 A S M F 4 3 A S M F 4 5 A S M F 4 8 A S M F 5 1 A S M F 5 4 A S M F 5 8 A S M F 6 0 A S M F 6 4 A S M F 7 0 A S M F 7 5 A S M F 7 8 A S M F 8 5 A S M F 9 0 A SMFl00A SMF110A SMF120A SMF130A SMF150A SMF160A SMF170A SMF180A SMF200A SMF220A SMF250A SMF300A SMF350A SMF400A SMF440A 6.5 7.5 8.5 100 110 120 130 150 160 170 180 200 220 250 300 350 400 440 6.4 6.67 7.22 7.78 8.33 8.89 9.44 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 22.2 24.4 26.7 28.9 31.1 33.3 36.7 44.4 47.8 53.3 56.7 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 201 224 246 279 335 391 447 492 7.37 7.98 8.6 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 92.1 95.8 104 111 123 135 147 159 185 197 209 222 247 272 309 371 432 494 543 200 100 2.5 2.5 2.5 9.2 10.3 11.2 12.9 13.6 14.4 15.4 18.2 19.9 21.5 23.2 24.4 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 292 324 356 405 486 567 648 713 21.7 19.4 17.9 16.7 15.5 14.7 13.9 11.8 10.1 9.3 8.6 8.2 7.7 7.2 6.8 6.2 5.6 5.1 4.8 4.4 4.1 3.8 3.4 3.1 2.9 2.8 2.6 2.4 2.3 2.1 1.8 1.7 1.5 1.4 1.4 1.3 1.2 1.1 0.9 0.8 0.7 0.7 0.6 0.5 0.5 0.5 0.5 0.45 0.4 0.35 0.3 AE AG AK AM AP AR AT AV AX AZ BE BG BK BM BP BR BT BV BX BZ CE CG CK CM CP CR CT CV CX CZ DE DG DK DM DP DR DT DV DX DZ EE EG EK EM EP ER ET EX E22 E25 E30 E35 E40 E44 SMF5.0CA SMF6.0CA SMF6.5CA SMF7.0CA SMF7.5CA SMF8.0CA SMF8.5CA SMF9.0CA S M F l 0 C A S M F 11 C A S M F 1 2 C A S M F 1 3 C A S M F 1 4 C A S M F 1 5 C A S M F 1 6 C A S M F 1 7 C A S M F 1 8 C A S M F 2 0 C A S M F 2 2 C A S M F 2 4 C A S M F 2 6 C A S M F 2 8 C A S M F 3 0 C A S M F 3 3 C A S M F 3 6 C A S M F 4 0 C A S M F 4 3 C A S M F 4 5 C A S M F 4 8 C A S M F 5 1 C A S M F 5 4 C A S M F 5 8 C A S M F 6 0 C A S M F 6 4 C A S M F 7 0 C A S M F 7 5 C A S M F 7 8 C A S M F 8 5 C A S M F 9 0 C A SMFl00CA SMF110CA SMF120CA SMF130CA SMF150CA SMF160CA SMF170CA SMF180CA SMF200CA SMF220CA SMF250CA SMF300CA SMF350CA SMF400CA SMF440CA CAE CAG CAK CAM CAP CAR CAT CAV CAX CAZ CBE CBG CBK CBM CBP CBR CBT CBV CBX CBZ CCE CCG CCK CCM CCP CCR CCT CCV CCX CCZ CDE CDG CDK CDM CDP CDR CDT CDV CDX CDZ CEE CEG CEK CEM CEP CER CET CEX CE22 CE25 CE30 CE35 CE40 CE44 Uni Bi Uni Bi

Rev:2019A0 Page :2 Typical Characterisitics https://www.microdiode.com SMF5.0(C)A THRU SMF440(C)A Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 200 Watts The curve above is for reference only. Fig.1 Peak Pulse Power Rating Curve 10.1 0.1 1.0 100 10 100 1000 10000 100 25 50 75 100 125 150 175 Fig.2 Forward Current Derating Curve Fig.4 Maximum Non-Repetitive Peak Forward Surge Current 1001 PPPM ,PEAK PULSE FORWARD ,kW td,PULSE WIDTH ,us Non-Repetive Pulse.Wavefom Shown in Figure.3 TA=25°C IFSM ,PEAK FORWARD SURGE CURRENT, AMPERES Number of Cycles at 60Hz TJ=TJmax 8.3ms Single Half Sinepwave JEDEC Method PEAK PULSE POWER(PPP)OR CURRENT(Ipp) DERATINGIN PERCENTAGE% TA,AMBIENT TEMPERATURE,°C 100 Fig.3 Pulse Waveform 0 1.0 2.0 3.0 4.0 120 Ippm ,Peak Pulse Current (%) T,TIME,ms tf=10usec Peak Value I ppm Half Value-I pp/2 10/1000usec Waveform as Defined bye R.E.A. Pulse Width (td) is Defined as the Point where the Peak. Current Decayst to 50% of Ipp TA=25°C

https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout 0.079 0.173 Symbol Unit (mm) A C D 0.047 4.4 E B Unit (inch) 0.126 1.2 0.0471.2 E B d F W PA D D1D2 C T Item Tolerance SOD-123FL Carrier width Carrier length Carrier depth Sprocket hole 7" Reel outside diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Reel width W1 Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.05 0.1 0.1 0.1 0.1 2.0 unit:mm 1.55 178.00 50.0 13.00 1.75 3.50 4.00 4.00 2.00 0.25 8.15 10.5 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2.1 4.0 1.60 Reel packing SOD-123FL 7" 3,000 4.0 45,000 210*208*203 178 430*430*235 180,000 9.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(m/m)(pcs)(m/m)(pcs) 3.2 SMF5.0(C)A THRU SMF440(C)A Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 200 Watts