Datasheet search site | www.alldatasheet.com
Document overview
- PDF pages: 3
Technical content
Features
200 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time Polarity: Color band denotes cathode end Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, method 2026 except Bipolar Mounting position: Any Maximum Ratings(TA=25℃ unless otherwise noted) Parameter Symbol Value UNIT Peak power dissipation with a 10/1000μs waveform(1) PPP 200 W Peak power dissipation with a 8/20μs waveform(1) PPP 1000 W Peak pulse current wih a 10/1000μs waveform(1) IPP See Next Table A Power dissipation on infinite heatsink at TL = 75 °C P D 0.4 W Peak forward surge current, 8.3 ms single half sine- wave unidirectional only(2) IFSM 20 A Maximum instantaneous forward voltage at 25 A for unidirectional only VF 3.5 V Operating junction and storage temperature range TJ, TSTG –55 to +150 °C (1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1 (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Dimensions : inch [ mm ] 0.114 0.102 [ 2.90 2.60 0.075 0.063 [ 1.90 1.60] 1.20 0.70] 0.01 0.002 [ 0.25 0.05 0.051 0.037 1.30 0.95] 0.154 0.138 3.90 3.50 0.039 0.023 1.00 0.60] http://www.lgesemi .com mai l:lge@lgesemi.comRevision:20220701-P1 https://alldatasheet.com
(V) Maximum Reverse Surge Current IPP (A) Maximum Clamping Voltage VC @IPP (V) 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics(TA=25к unless otherwise noted) Part Number (Uni) Part Number (Bi) Device Marking Code Breakdown Voltage VBR @IT Maximum Reverse Leakage IR @VRWM (uA)Uni Bi Min (V) Max (V) IT (mA) Note: 1. The available parts are "A" type only,the parts without A(VBR is ±10%) is not available 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double SMF Series Transient Voltage Suppressors http://www.lgesemi .com mail:lge@lgesemi.comRevision:2022 0701-P1 https://www.alldatasheet.com
AMBIENAVERAGE FORWARD CURRENT, (A) 0 100 1 20 25 100 100 6 150 0 0 0.4 0.1 7 70 0.4 4500 0.1 ## 0 Fig. 2 - Maximum Non-Repetitive Surge Current Fig. 1 - Pulse Derating Curve Ratings and Characteristics Curves (TA=25к unless otherwise noted) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0 25 50 75 100 125 150 175 200 Steady State Power Dissipation, (W) 1 10 100 Peak Forward Surge Current, (A) Number of Cycles at 60 Hz TJ = TJ max. 8.3 ms Single Half Sine-Wave 100 0 25 50 75 100 125 150 175 200 Peak Pulse Derating in Percentage of Peak Power or Current, (%) Ambient Temperature ,TA (к) 0.1 01 1 10 100 1000 10000 Peak Power (kW) ˈ ˇˈ˃ 0.2 100 ˈ ˇˈ˃ 1 50 ˈ ˇˈ˃ 1.5 33 ˊ˃˃ ˅ 2 23 ˈ ˇˈ˃ 3 13 ˈ˃˃ ˆ 4 10 Fig. 5 - Pulse Waveform Fig. 6 - Typical Junction Capacitance Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 100 1000 10000 1 10 100 1000 Junction Capacitance,CJ (pF) Reverse Breakdown Voltage,VBR (V) Bi-directional @VRWM Uni-directional @VRWM TJ=25 °C f=1.0MHz 0.0 0.1 0 25 50 75 100 125 150 175 200 Stea Lead Temperature , TL (к) 100 0 1 2 3 4 Peak Pulse Current , (% ) Time , (ms) TJ = 25 ̓C Pulse Width (td) is defined as the point where the peak current decays to 50 % of Ipp 10/1000 ȝsec. Waveform as defined by R.E.A. Peak Value (Ipp) td Tr=10ȝs Half Value = Ipp Bi-directional @zero bias Uni-directional @zero bias 0.1 0.1 1 10 100 1000 10000 Pulse Width ,td (ȝs) SMF Series Transient Voltage Suppressors http://www.lgesemi .com mail:lge@lgesemi.comRevision:20220701-P1 PACKAGE SPQ/PCS CARTON SPQ/PCS CARTON SIZE/CM CARTON GW/KG CARTON NW/KG SOD-123FL 3000/REEL 90000 40X20X22 5.00 4.00 https://www.alldatasheet.com