SMF LUGUANG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

200 W peak pulse power capability with a

10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time Polarity: Color band denotes cathode end Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, method 2026 except Bipolar Mounting position: Any Maximum Ratings(T A =25℃ unless otherwise noted) Parameter Symbol Value UNIT Peak power dissipation with a 10/1000μs waveform (1) P PP 200 W Peak power dissipation with a 8/20μs waveform (1) P PP 1000 W Peak pulse current wih a 10/1000μs waveform (1) I PP See Next Table A Power dissipation on infinite heatsink at T L = 75 °C P D 0.4 W Peak forward surge current, 8.3 ms single half sine- wave unidirectional only (2) I FSM 20 A Maximum instantaneous forward voltage at 25 A for unidirectional only V F 3.5 V Operating junction and storage temperature range T J , T STG –55 to +150 °C (1)Non-repetitive current pulse per Fig.5 and derated above T A = 25 °C per Fig.1 (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Dimensions : inch [ mm ] 0.114 0.102 2.90 2.60 0.075 0.063 1.90 1.60 1.20 0.70 0.01 0.002 0.25 0.05 0.051 0.037 1.30 0.95 0.154 0.138 3.90 3.50 0.039 0.023 1.00 0.60 http://www.lgesemi .com mail:lge@lgesemi.comRevision:20170701-P1

Uni Bi Min (V) Max (V) I T (mA) SMF6.0A SMF6.0CA FG K G SMF6.5A SMF6.5CA F K K K SMF13A SMF13CA H G L G SMF14A SMF14CA H K L K SMF17A SMF17CA HR L R SMF28A SMF28CA J G SMF30A SMF30CA J K M K SMF58A SMF58CA XG N G SMF60A SMF60CA XK N K SMF120A SMF120CA T G SMF130A SMF130CA T K SMF170A SMF170CA T R Note: Working Peak Reverse Voltage V RWM (V) Maximum Reverse Surge Current I PP (A) Maximum Clamping Voltage V C PP (V) 1. The available parts are "A" type only,the parts without A(V BR is ±10%) is not available 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having V R of 10 volts and under, the I R limit is double Electrical Characteristics(T A =25к unless otherwise noted) Part Number (Uni) Part Number (Bi) Device Marking Code Breakdown Voltage V BR T Maximum Reverse Leakage I R RWM (uA) SMF Series Transient Voltage Suppressors http://www.lgesemi .com mail:lge@lgesemi.comRevision:20170701-P1

AMBIENAVERAGE FORWARD CURRENT, (A) 0 100 1 20 25 100 100 6 150 0 0 0.4 0.1 7 70 0.4 4500 0.1 ## 0 Fig. 2 - Maximum Non-Repetitive Surge Current Fig. 1 - Pulse Derating Curve Ratings and Characteristics Curves (TA=25к unless otherwise noted) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0 25 50 75 100 125 150 175 200 Steady State Power Dissipation, (W) 1 10 100 Peak Forward Surge Current, (A) Number of Cycles at 60 Hz TJ = TJ max. 8.3 ms Single Half Sine-Wave 100 0 25 50 75 100 125 150 175 200 Peak Pulse Derating in Percentage of Peak Power or Current, (%) Ambient Temperature ,TA (к) 0.1 01 1 10 100 1000 10000 Peak Power (kW) ˈ ˇˈ˃ 0.2 100 ˈ ˇˈ˃ 1 50 ˈ ˇˈ˃ 1.5 33 ˊ˃˃ ˅ 2 23 ˈ ˇˈ˃ 3 13 ˈ˃˃ ˆ 4 10 Fig. 5 - Pulse Waveform Fig. 6 - Typical Junction Capacitance Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 100 1000 10000 1 10 100 1000 Junction Capacitance,CJ (pF) Reverse Breakdown Voltage,VBR (V) Bi-directional @VRWM Uni-directional @VRWM TJ=25 °C f=1.0MHz 0.0 0.1 0 25 50 75 100 125 150 175 200 Stea Lead Temperature , TL (к) 100 0 1 2 3 4 Peak Pulse Current , (% ) Time , (ms) TJ = 25 ̓C Pulse Width (td) is defined as the point where the peak current decays to 50 % of Ipp 10/1000 ȝsec. Waveform as defined by R.E.A. Peak Value (Ipp) td Tr=10ȝs Half Value = Ipp Bi-directional @zero bias Uni-directional @zero bias 0.1 0.1 1 10 100 1000 10000 Pulse Width ,td (ȝs) SMF Series Transi ent Voltage Suppressors h ttp://www.lgesemi .com mai l:lge@lgesemi.comRevision:20170701-P1 PACKAGE SPQ/PCS CARTON SPQ/PCS CARTON SIZE/CM CARTON GW/KG CARTON NW/KG SOD-123 3000/REEL 90000 40X20X22 5.00 4.00