SMF5.0A AITSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

AiT Semiconductor Inc. www.ait-ic.com SMFxxx TRANSIENT VOL TAGE SUPPRESSOR POWER 200 WATTS REV1.1 - JAN 2015 RELEASED, JUN 2017 UPDATED - - 1 - DESCRIPTION FEATURES The SMFxxx is available in SOD-123FL Package.  For surface mounted applications in order to optimize board space.  Low profile package  Glass passivated junction  Low inductance  Plastic package has Underwriters Laboratory Flammability  Available in SOD-123FL Package

ORDERING INFORMATION

SMF5.0A/CA SMF40A/CA SMF6.0A/CA SMF43A/CA SMF6.5A/CA SMF45A/CA SMF7.0A/CA SMF48A/CA SMF7.5A/CA SMF51A/CA SMF8.0A/CA SMF54A/CA SMF8.5A/CA SMF58A/CA SMF9.0A/CA SMF60A/CA SMF10A/CA SMF64A/CA SMF11A/CA SMF70A/CA SMF12A/CA SMF75A/CA SMF13A/CA SMF78A/CA SMF14A/CA SMF85A/CA SMF15A/CA SMF90A/CA SMF16A/CA SMF100A/CA SMF17A/CA SMF110A/CA SMF18A/CA SMF120A/CA SMF20A/CA SMF130A/CA SMF22A/CA SMF150A/CA SMF24A/CA SMF160A/CA SMF26A/CA SMF170A/CA SMF28A/CA SMF180A/CA SMF30A/CA SMF200A//CA SMF33A/CA SMF220A//CA SMF36A/CA Note SPQ: 3,000pcs/Reel AiT provides all RoHS Compliant Products MECHANICAL DATA Case: SOD-123FL Terminals: Solderable per MIL-STD-750, Method 2026 Approx. Weight:15mg 0.00048oz PIN DESCRIPTION

AiT Semiconductor Inc. www.ait-ic.com SMFxxx TRANSIENT VOL TAGE SUPPRESSOR POWER 200 WATTS REV1.1 - JAN 2015 RELEASED, JUN 2017 UPDATED - - 2 - ABSOLUTE MAXIMUM RATINGS Ratings at 25°C ambient temperature unless otherwise specified. PPPM, Peak Pulse Power Dissipation on TA=25°CNOTE1,2,5 (Fig1) 200W IFSM, Peak Forward Surge CurrentNOTE3 20A IPPM, Peak Pulse Current on 10/1000us WaveformNOTE1 (Fig3) See Table1 PM(AV), Steady State Power DissipationNOTE4 1W TJ,TSTG, Operating Junction and Storage Range -55°C ~ +150°C RθJA, Typical Thermal Resistance 180°C/W Stresses above may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated in the Electrical Characteristics are not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. NOTE1: Non-repetitive current pulse per Fig 3 and derated above TA=25℃ per Fig 2. NOTE2: Mounted on 5mm2 copper pads to each terminal. NOTE3: 8.3ms single half sine wave, or equivalent square wave duty cycle=4 pulses per minutes maximum NOTE4: lead temperature at TL =75℃ NOTE5: Peak pulse power. waveform is tp=10/1000us. NOTE6: A transient suppressor is sele cted according to the working peak reverse voltage (VRWM), Which should be equal to or greater than the DC or continuous peak operating voltage level.

AiT Semiconductor Inc. www.ait-ic.com SMFxxx TRANSIENT VOL TAGE SUPPRESSOR POWER 200 WATTS REV1.1 - JAN 2015 RELEASED, JUN 2017 UPDATED - - 3 -

ELECTRICAL CHARACTERISTICS

TA = 25°C Part Number Breakdown Voltage Test Current Reverse Leakage Max. Clamp Voltage Peak Pulse Current VRWM VBR @ IT IT IR @ VRWM VC @ IPP IPP Min Max Uni Bi V V V mA μA V A SMF9.0A SMF9.0CA 9 10 11.1 1 5 15.4 13 SMF10A SMF10CA 10 11.1 12.3 1 2.5 17 11.8 SMF11A SMF11CA 11 12.2 13.5 1 2.5 18.2 11 SMF13A SMF13CA 13 14.4 15.9 1 1 21.5 9.3 SMF14A SMF14CA 14 15.6 17.2 1 1 23.2 8.6 SMF15A SMF15CA 15 16.7 18.5 1 1 24.4 8.2 SMF16A SMF16CA 16 17.8 19.7 1 1 26 7.7 SMF17A SMF17CA 17 18.9 20.9 1 1 27.6 7.2 SMF18A SMF18CA 18 20 22.1 1 1 29.2 6.8 SMF20A SMF20CA 20 22.2 24.5 1 1 32.4 6.2 SMF22A SMF22CA 22 24.4 26.9 1 1 35.5 5.6 SMF24A SMF24CA 24 26.7 29.5 1 1 38.9 5.1 SMF26A SMF26CA 26 28.9 31.9 1 1 42.1 4.8 SMF28A SMF28CA 28 31.1 34.4 1 1 45.4 4.4 SMF30A SMF30CA 30 33.3 36.8 1 1 48.4 4.1 SMF33A SMF33CA 33 36.7 40.6 1 1 53.3 3.8 SMF36A SMF36CA 36 40 44.2 1 1 58.1 3.4 SMF40A SMF40CA 40 44.4 49.1 1 1 64.5 3.1 SMF43A SMF43CA 43 47.8 52.8 1 1 69.4 2.9 SMF45A SMF45CA 45 50 55.3 1 1 72.7 2.8 SMF48A SMF48CA 48 53.3 58.9 1 1 77.4 2.6 SMF51A SMF51CA 51 56.7 62.7 1 1 82.4 2.4 SMF54A SMF54CA 54 60 66.3 1 1 87.1 2.3 SMF58A SMF58CA 58 64.4 71.2 1 1 93.6 2.1 SMF60A SMF60CA 60 66.7 73.7 1 1 96.8 1.8

AiT Semiconductor Inc. www.ait-ic.com SMFxxx TRANSIENT VOL TAGE SUPPRESSOR POWER 200 WATTS REV1.1 - JAN 2015 RELEASED, JUN 2017 UPDATED - - 4 - Part Number Breakdown Voltage Test Current Reverse Leakage Max. Clamp Voltage Peak Pulse Current VRWM VBR @ IT IT IR @ VRWM VC @ IPP IPP Min Max Uni Bi V V V mA μA V A SMF64A SMF64CA 64 71.1 78.6 1 1 103 1.7 SMF70A SMF70CA 70 77.8 86 1 1 113 1.5 SMF75A SMF75CA 75 83.3 92.1 1 1 121 1.4 SMF78A SMF78CA 78 86.7 95.8 1 1 126 1.4 SMF85A SMF85CA 85 94.4 104 1 1 137 1.3 SMF90A SMF90CA 90 100 111 1 1 146 1.2 SMF100A SMF100CA 100 111 123 1 1 162 1.1 SMF110A SMF110CA 110 122 135 1 1 177 1 SMF120A SMF120CA 120 133 147 1 1 193 0.9 SMF130A SMF130CA 130 144 159 1 1 209 0.8 SMF150A SMF150CA 150 167 185 1 1 243 0.7 SMF160A SMF160CA 160 178 197 1 1 259 0.7 SMF170A SMF170CA 170 189 209 1 1 275 0.6 SMF180A SMF180CA 180 201 222 1 1 292 0.5 SMF200A SMF200CA 200 224 247 1 1 324 0.5 SMF220A SMF220CA 220 246 272 1 1 356 0.5

AiT Semiconductor Inc. www.ait-ic.com SMFxxx TRANSIENT VOL TAGE SUPPRESSOR POWER 200 WATTS REV1.1 - JAN 2015 RELEASED, JUN 2017 UPDATED - - 5 - TYPICAL CHARACTERISTICS Figure1. Peak Pulse Power Rating Curve Figure 2. Forward Current Derating Curve Figure3. Pulse Waveform Figure4. Maximum Non-Repetitive Peak Forward Surge Current

AiT Semiconductor Inc. www.ait-ic.com SMFxxx TRANSIENT VOL TAGE SUPPRESSOR POWER 200 WATTS REV1.1 - JAN 2015 RELEASED, JUN 2017 UPDATED - - 6 -

PACKAGE INFORMATION

Dimension in SOD−123FL Package (Unit: mm) Plastic surface mounted package; 2 leads The Recommended Mounting Pad Size UNIT A C D E e g HE ∠ mm mil Max 43 7.9 114 75 43 35 150 Min 35 4.7 102 67 31 28 138

AiT Semiconductor Inc. www.ait-ic.com SMFxxx TRANSIENT VOL TAGE SUPPRESSOR POWER 200 WATTS REV1.1 - JAN 2015 RELEASED, JUN 2017 UPDATED - - 7 - IMPORTANT NOTICE AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant informat ion to verify, before placing orders, that the information being relied on is current. AiT Semiconductor Inc. ’s integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life support applications, devices o r systems or other critical applications. Use of AiT products in such applications is understood to be fully at the risk of the customer. As used herein may involve potential risks of death, personal injury , or server property, or environmental damage. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. AiT Semiconductor Inc. assumes to no liability to customer product design or application support. AiT warrants the performance of its products of the specifications applicable at the time of sale.