SMF5.0A UMW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
FEATURES
- 55 to + TStorage - 55 to + TJunction Operating VIF = 50A, tp = 400 Forward clamping RCu pads ( 40 μm Mounted on epoxy glass PCB with 3 mm x 3 mm,Thermal ± Air discharge acc. IEC 61000-4-2; 10 ± VContact discharge acc. IEC 61000-4-2; 10 ESD I8.3 ms single half Peak forward surge tp = 10/1000 μs Ptp = 8/20 μs waveform acc. IEC Peak pulse see “Electrical Itp = 10/1000 μs Peak pulse TEST ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER CONDITIONS SYMBOL VALUE UNIT current waveform PPM Characteristics” A power 61000-4-5 PP 1000 W waveform 200 W current sine-wave FSM 50 A immunity pulses ESD 30 kV pulses 30 kV resistance thick) thJA 180 K/W voltage μs F 2.5 V temperature temperature J 150 °C temperature STG 150 °C
- For surface mounted applications
- Low-profile package
- Optimized for LAN protection applications
- Ideal for ESD prote ction of data lines in accordance with IEC 61000-4-2 (IEC 801-2)
- Ideal for EFT protecti on of data li nes in accordance with IEC 61000-4-4 (IEC 801-4)
- ESD-protection acc. IEC 61000-4-2 ± 30 kV contact discharge ± 30 kV air discharge
- Low i ncremental surge re sistance, e xcellent c lamping capability
- 200 W peak pulse power capability with a 10/1000 μs waveform, repetition rate (duty cycle): 0.01 %
- “Low-Noise” technology - very fast response time
- High temperature sold ering guaranteed: 260 °C/10 s at terminals
- e3 - Sn
- AEC-Q101 qualified UMW R SMF5.0A(CA) THRU SMF220A(CA) /G56 www.umw-ic.com 1 UTD Semiconductor Co.,Limited
Uni Bi Min (V) Max (V) IT (mA) Working Peak Reverse Voltage VRWM (V) Maximum Reverse Surge Current IPP (A) Maximum Clamping Voltage VC @IPP (V) Electrical Characteristics(TA=25°C unless otherwise noted) Part Number (Uni) Part Number (Bi) Device Marking Code Breakdown Voltage VBR @IT Maximum Reverse Leakage IR @VRWM (uA) Note: 1. The available parts are "A" type only,the parts without A(VBR is ±10%) is not available 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double UMW R /G56 www.umw-ic.com 2 UTD Semiconductor Co.,Limited SMF5.0A(CA) THRU SMF220A(CA)
Ratings and Characteristics Curves(Ta=25°C unless otherwise noted) UMW R SMF5.0A(CA) THRU SMF220A(CA) /G56 www.umw-ic.com 3 UTD Semiconductor Co.,Limited
ORDERING INFORMATION
R /G56 www.umw-ic.com 4 UTD Semiconductor Co.,Limited SMF5.0A(CA) THRU SMF220A(CA)