SMF1001D1 SECOS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Any changing of specification will not be informed individual SMF1001D1 THRU SMF1007D1 VOLTAGE 50V ~ 1000V 10.0AMP Surface Mount Fast Recovery Rectifiers MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at Ta=55 C (Per Leg 5.0A) Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 5.0A Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Ta=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) SMF1001D1 UNITS 50 100 200 400 600 800 1000 V 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 10.0 100 0.5 -65 ~ +150 V A A V uA mA nS pF 1.3 250 500150 Operating and Storage Temperature Range TJ, TSTG C Thermal Resistance, Juntion to Lead (Note 3) 8 1.5 1.7 C/WThermal Resistance, Juntion to Ambient (Note 3) 30 SMF1002D1 SMF1003D1 SMF1004D1SMF1005D1SMF1006D1SMF1007D1 NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color band denotes cathode end * Mounting position: Any

FEATURES

  • Ideal for surface mount applications * Easy pick and place * Built-in strain relief * Fast switching speed 3. Rating applies when surface mounted on the minimum pad size recommended, PC Board with 8.0 X 8.0mm copper pad. http://www.SeCoSGmbH.com Elektronische Bauelemente 01-Jun-2002 Rev. A Page 1 of 2 TO-252 A 6.40 6.80 G 0.50 0.70 B 5.20 5.50 H 2.20 2.40 C 6.80 7.20 J 0.45 0.55 D 2.20 2.80 K 0 0.15 E 2.30 REF. L 0.90 1.50 F 0.70 0.90 M 5.40 5.80 S 0.60 0.90 R 0.80 1.20 PIN 1 PIN 3 CASE PIN 2 RoHS Compliant Product A suffix of "-C" specifies halogen-free

http://www.SeCoSGmbH.com Elektronische Bauelemente Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 1 of 2 SMF1001D1 THRU SMF1007D1 VOLTAGE 50V ~ 1000V 10.0AMP Surface Mount Fast Recovery Rectifiers 0.1 1.0 .01 RATING AND CHARACTERISTIC CURVES (SMF1001D1 THRU SMF1007D1) FIG.1-TYPICAL FORWARD CHARACTERISTICS FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) FIG.5-TYPICAL JUNCTION CAPACIT ANCE REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLT AGE,(V) Pulse Width 300us 1% Duty Cycle 2.0 4.0 6.0 8.0 (+) (+) 25Vdc (approx.) ( ) ( ) PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE W NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr .01 .05 .1 .5 1 5 10 50 100 D.U.T. 5.0 AMBIENT TEMPERATURE ( C) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS NONINDUCTIVE NONINDUCTIVE W W Tj=25 C FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWAARD SURGE CURRENT,(A) 100 NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method Single Phase Half Wave 60Hz Resistive Or Inductive Load 0 20 40 60 80 100 120 140 160 180 200 SMF1005SMF1001~SMF1004 SMF1006~SMF1007