SME312 BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Microprocessor-Based TEACH Mode Photoelectric Sensors U.S. patent(s) issued or pending

  • TEACH-mode sensors in the popular MINI-BEAM package Easy push-button programming automatically adjusts sensitivity to optimal setting
  • Multiple sensing modes include retroreflective, polarized retro, clear object detection, diffuse, divergent, and convergent, plus glass and plastic fiber optic models
  • Fast, 500 microsecond (0.5 millisecond) output response
  • Bipolar NPN (sinking)/PNP (sourcing) outputs
  • Easy output programming eliminates the need for Light or Dark operate selection
  • Separate TEACH input allows remote programming by an external device, such as a switch or process controller
  • LED status indications for received signal strength (using Banner's AID ™ function), power ON, and output state
  • Green Stability indicator flashes when received signal level approaches the switching threshold, also indicates Power ON
  • Integral 2 m (6.5 ft) cable or 5-pin Euro-style quick-disconnect (QD) connector, depending on model; 9 m (30 ft) cable models are also available WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models Retroreflective Models Model1 Sensing Mode Range or Focus2 Supply Voltage Output Type SME312LV Retroreflective, Visible red, 650 nm 5 m (15 ft) 10 V dc to 30 V dc Bipolar NPN/PNPSME312LP Polarized retroreflective, Visible red, 650 nm 10 mm to 3 m (0.4 in to 10 ft) SME312LPC Polarized retroreflective, Visible red, 650 nm (clear object) 1 m (3.3 ft) with supplied reflector Diffuse Models Model1 Sensing Mode Range or Focus Supply Voltage Output Type SME312D Diffuse, Infrared, 880 nm 380 mm (15 in)

10 V dc to 30 V dc Bipolar NPN/PNPSME312DV Diffuse, Visible red, 650 nm 1100 mm (43 in)

SME312W Divergent Diffuse, Infrared, 880 nm 130 mm (5 in) 1 Standard 2 m (6.5 ft) cable models are listed. To order the 9 m (30 ft) cable model, add suffix “W/30” to the model number (for example, SME312LV W/30.) To order the 5-pin Euro-style QD models, add suffix “QD” (for example, SME312LVQD). Models with a QD connector require a mating cable. 2 Sensing ranges vary according to the efficiency and reflective area of the retroreflector(s) used. (Retroreflective tape is not recommended for use with Clear Object Detection models.) See Accessories and the Banner Engineering catalog for more information. MINI-BEAM SME312 Expert Series Original Document 55214 Rev. G

13 July 2016

Model1 Sensing Mode Range or Focus Spot Size at Focus Supply Voltage Output Type SME312CV Convergent, Visible red, 650 nm 16 mm (0.65 in) 1.3 mm (0.05 in)

10 V dc to 30 V dc Bipolar NPN/PNP

SME312CV2 Convergent, Visible red, 650 nm 43 mm (1.7 in) 3.0 mm (0.12 in) SME312CVG Convergent, Visible green, 525 nm 16 mm (0.65 in) 1.0 mm (0.04 in) SME312CVB Convergent, Visible blue, 475 nm 16 mm (0.65 in) 1.8 mm (0.07 in) SME312CVW Convergent, Visible white, 450–650 nm Glass Fiber Optic Models Model1 Sensing Mode Range or Focus Supply Voltage Output Type SME312F Glass Fiber Optic, 880 nm infrared Range varies by sensing mode and fiber optics used 10 V dc to 30 V dc Bipolar NPN/PNP SME312FV Glass Fiber Optic, Visible red, 650 nm SME312FVG Glass Fiber Optic, Visible green, 525 nm SME312FVB Glass Fiber Optic, Visible blue, 475 nm SME312FVW Glass Fiber Optic, Visible white, 450–650 nm Plastic Fiber Optic Models Model1 Sensing Mode Range or Focus Supply Voltage Output Type SME312FP Plastic Fiber Optic, Visible red, 650 nm Range varies by sensing mode and fiber optics used 10 V dc to 30 V dc Bipolar NPN/PNP SME312FPG Plastic Fiber Optic, Visible green, 525 nm SME312FPB Plastic Fiber Optic, Visible blue, 475 nm SME312FPW Plastic Fiber Optic, Visible white, 450–650 nm Overview Amber outputindicator LED Bi-color green/redindicator LED MINI-BEAM® Expert™ is a complete family of sensors, all housed in the popular, robust and compact rectangular housing. Their large push button and easy-to-see indicators provide easy configuration, alignment, and monitoring during use. Retroreflective and Polarized Retroreflective Mode models are excellent for sensing relatively small items where opposed-mode sensing is not possible. They are recommended for relatively clean environments where high excess gain is not required. Polarized models filter out unwanted reflections. Polarized Retroreflective Mode – Clear Object Detection models reliably detect the presence of clear objects. Diffuse Mode models are excellent for sensing objects of adequate size and reflectivity at short range. Divergent models are useful for sensing small items and translucent or transparent materials at close range. The SME312DV sensors effectively sense specular surfaces like semi-conductor wafers, disk drive media, glass and machined surfaces. The collimated optics of the SME312DV also permits the sensor to be mounted against clear container walls, view ports and other types of optical “feed-throughs.” Convergent Mode models are a good choice for counting adjacent radiused objects and for accurate position sensing. Blue, green and white beam models are recommended for color mark sensing. Glass Fiber Optic models are an excellent option for sensing in tight or otherwise inaccessible areas. Fibers withstand vibration and shock and are immune to electrical noise. Glass fibers withstand high temperatures, extreme moisture and corrosive materials. Glass fibers are not recommended for applications requiring bending or repeated flexing (see plastic fiber models). Visible beam models are recommended for color mark sensing. MINI-BEAM SME312 Expert Series 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 55214 Rev. G

Plastic Fiber Optic models are an excellent option for sensing in tight or otherwise inaccessible areas. Fibers withstand vibration and shock and are immune to electrical noise. Plastic fibers function well at temperatures from –30° to +70° C (– 20° F to +158° F), and stand up to repeated flexing. Most are easy to shorten in the field, for custom installations. Plastic fibers are not recommended for severe environments (see glass fiber models). Plastic fiber optic sensors are recommended for color mark sensing. Status Indicators Normal sensor operation is called RUN mode. Sensor configuration (setting the sensitivity threshold and selecting output ON and OFF conditions) is performed in TEACH mode. The two LED indicators (bi-color green/red and amber) have distinct roles in the two operation modes. If contrast is marginal, the bi-color indicator will flash green to indicate instability. If this occurs, reconfigure or realign the sensor, or clean the sensor or fiber lenses. The Signal Strength indicator is Banner’s exclusive AID™ (Alignment Indicating Device). Its pulse rate increases as the received light signal strength increases (during programming). This feature simplifies accurate alignment during TEACH mode, and gives a relative indication of sensing contrast between the light and dark conditions. LED RUN Mode TEACH Mode Solid green Power is on Flashing green Sensed light level is approaching sensing threshold3 Solid red Sensor “sees” its own modulated light source; pulse rate is proportional to the received light signal strength4 Amber on Outputs conducting Ready to TEACH output ON condition Amber off Outputs not conducting Ready to TEACH output OFF condition Remote Configuration The remote function can be used to configure the sensor remotely or to disable the push button for security. Connect the gray wire of the sensor to ground (0 V dc), with a remote programming switch connected between them. Pulse the remote line according to the diagrams in the configuration procedures. The length of the individual programming pulses is equal to the value T where: 0.04 seconds ≤ “T” ≤ 0.8 seconds Installation Wiring Diagrams Cabled Models QD Models bn Remote Teach bu wh bk gy + 10-30V dc– Load Load bn Remote Teach bu wh bk gy + 10-30V dc– Load Load 3 This is the Stability indicator, which signals when maintenance, realignment, or reconfiguration is needed during RUN mode. 4 The faster the pulse rate, the stronger the light signal. MINI-BEAM SME312 Expert Series P/N 55214 Rev. G www.bannerengineering.com - Tel: +1-763-544-3164 3

  1. Install the O-ring (supplied with the fiber) on each fiber end, as shown in the drawing. 2. While pressing the fiber ends firmly into the ports on the sensor front, slide the U-shaped retaining clip (supplied with the sensor) into the slot in the sensor's barrel, until it snaps into place. Plastic Fiber Installation Trimmed fiber control ends Plastic fiber emitter port Plastic fiber receiver port Gripper Unlock Lock Adapters for 0.25- and 0.5-mm fibers Sensor Face 1. With supplied fiber cutter, make a clean cut at the control ends of fibers. 2. Unlock the fiber gripper as shown in the drawing. 3. Apply appropriate fiber adaptors to the fiber, if needed. 4. Gently insert the prepared fiber ends into the ports as far as they will go. 5. Slide the fiber gripper back to lock, as shown in the drawing. Static Teach Sensor positions threshold between taught conditions Output OFF Output ON 2nd TaughtCondition 1st TaughtCondition The two sensing conditions may be presented in either order. The condition presented first is the condition for which the output will energize (the “Output ON” target). Sensitivity is automatically set (and optimized) when teaching the sensor the ON and OFF conditions. When the push button is clicked, the sensor samples each sensing condition and registers it into memory. After the second sensing condition is registered, the MINI-BEAM Expert automatically sets the sensitivity to the optimum value for the application, and then returns to RUN mode. Push button (0.04 seconds ≤ “Click” ≤ 0.8 seconds); Remote line (0.04 seconds ≤ “T” ≤ 0.8 seconds) 1. Access TEACH mode. Method Action Result Via push button Press and hold push button until the bi-color (green/ red) indicator begins to flash red, or turns OFF. Push button method only: The amber LED is on. The red LED pulses to indicate relative received signal strength. The sensor is ready for the output ON condition. Via remote line No action required; sensor is ready for 1st sensing condition. MINI-BEAM SME312 Expert Series 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 55214 Rev. G
  1. Teach the first sensing condition. Method Action Result Via push button Present the first sensing condition and click the push button. The amber LED is off. The red LED pulses to indicate relative signal strength. The sensor registers the output ON condition and is ready for the output OFF condition.Via remote line Present the first sensing condition and single-pulse the remote line. 3. Teach the second sensing condition and return to RUN mode. Method Action Result Via push button Present the second sensing condition and click the push button. If the teach is accepted the green LED is on (or flashes if the signal is close to the switching threshold) and the amber LED is off until the sensing condition changes; the sensor registers the output OFF condition, positions the threshold, and returns to RUN mode. If the teach is not accepted, the amber LED is on and the red LED pulses to indicate the relative received signal strength. The sensor returns to its wait state and is ready for the first sensing condition. Via remote line Present the second sensing condition and single-pulse the remote line. NOTE: The sensor returns to RUN mode if the first TEACH condition is not registered within 90 seconds. TEACH mode may be cancelled before either the first or second condition by holding the push button depressed for more than two seconds. Enabling or Disabling the Push Button In addition to its programming function, the remote line may be used to disable the push buttons for security. Disabling the push buttons prevents undesired tampering with the sensor configuration settings. 1. Connect the sensor’s gray wire. 2. Four-pulse the remote line to enable or disable the push button. The sensor toggles between enable and disable settings and returns to RUN mode. MINI-BEAM SME312 Expert Series P/N 55214 Rev. G www.bannerengineering.com - Tel: +1-763-544-3164 5

Supply Voltage and Current

10 V dc to 30 V dc (10% maximum ripple) at less than 45 mA,

Supply Protection Circuitry Protected against reverse polarity and transient voltages Adjustments Push-button TEACH mode sensitivity setting; remote TEACH mode input is provided Indicators Two LEDs: amber and bi-color green/red Construction Reinforced thermoplastic polyester housing, totally encapsulated, o- ring seal, acrylic lenses, and stainless steel screws. Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to http:// www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Connections PVC-jacketed 5-conductor 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, or 5-pin Euro-style quick-disconnect (QD) fitting are available. QD cables are ordered separately. Application Notes The first condition presented during TEACH mode becomes the output ON condition. Output Configuration Bipolar: One current sourcing (PNP) and one current sinking (NPN) open-collector transistor Output Rating 150 mA maximum each output at 25° C, derated to 100 mA at 70° C (derate ≈ 1 mA per °C) Off-state leakage current: less than 5 μ A at 30 V dc ON-state saturation current: less than 1 V at 10 mA; less than 1.5 V at 150 mA Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short-circuit of outputs Output Response Time Sensors will respond to either a “light” or a “dark” signal of 500 microseconds or longer duration, 1 kHz max. NOTE: 1 second delay on power-up; outputs do not conduct during this time. Repeatability 100 microseconds (all models) Rating Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 6, 12, and 13; IEC IP67 Operating Conditions Temperature: –20° to +70° C (–4° to +158° F) Max. Relative Humidity: 90% at 50° C (non-condensing) Dimensions Cabled Models (Suffix E, EL, EPD, R, RL, RPD, LV, LVAG, LP, LPC, D, C, C2, CV, CV2, CVG, CV2G, CVB, CV2B, CVW ) 3 mm dia Clearance (2) M18 × 1 × 15 mm Thread(Mounting nut supplied) 19.1 mm (0.75”) Mounting peg(6.3 mm dia × 2.5 mm) 2 m (6.5’) Cable Divergent Diffuse Models (Suffix DBZ and W) 3 mm dia Clearance (2) Bezel 18.0 mm (0.71”) MINI-BEAM SME312 Expert Series 6 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 55214 Rev. G

(Suffix F, FV, FVB, FVG, FVW) M18 x 1 x 19 mm Thread (Mounting Nut Supplied) 57.5 mm (2.27") 31.2 mm (1.23") Fiber Optic Fitting Plastic Fiber Models (Suffix FP, FPB, FPG, FPH, FPW) 3 mm dia clearance (2) FiberOpticFitting 22.3 mm(0.88”) 19.1 mm(0.75”) Mounting Peg(6.3 mm dia × 2.5 mm) 2 m (6.5’) Cable QD Models 20.0 mm(0.79”) 12 mm Thread Quick-disconnect Performance Curves Retroreflective Excess Gain Beam Pattern Excess Gain Beam Pattern 100 1000 EXCESSGAIN DISTANCE SME312LVRetroreflective Mode 5 m15'4 m12'3 m9'2 m6'1 m3'0 025 mm50 mm75 mm 25 mm50 mm75 mm 01.0"2.0"3.0" 1.0"2.0"3.0" DISTANCE SME312LV Retroreflective Mode 100 0.1 m0.3' 1 m3' 10 m30'.01 m0.03' 1000 EXCESSGAIN DISTANCE SME312LP Retroreflective Mode 020 mm40 mm60 mm 20 mm40 mm60 mm 00.8"1.6"2.4" 0.8"1.6"2.4" DISTANCE SME312LPRetroreflective Mode 100 1000EXCESSGAIN DISTANCE SME312LPCRetroreflectiveMode with BRT-2X2 Reflector with BRT-77X77Reflector 050 mm100 mm150 mm 50 mm100 mm150 mm 02"4"6" 2"4"6" DISTANCE SME312LPCRetroreflective Mode with BRT-2X2 Reflectorwith BRT-77X77Reflector MINI-BEAM SME312 Expert Series P/N 55214 Rev. G www.bannerengineering.com - Tel: +1-763-544-3164 7

Diffuse-mode performance based on 90% reflectance white test card. Excess Gain Beam Pattern Excess Gain Beam Pattern 05 mm10 mm15 mm 5 mm10 mm15 mm 00.2"0.4"0.6" 0.2"0.4"0.6" DISTANCE SME312DDiffuse Mode 100 10 mm0.4" 100 mm4.0" 1000 mm40" 10000 mm400" 1000EXCESSGAIN DISTANCE SME312DVDiffuse Mode 05 mm10 mm15 mm 5 mm10 mm15 mm20 mm 0.2"0.4"0.6"0.8" DISTANCE SME312DVDiffuse Mode 100 10 mm.4" 100 mm4" 1000 mm40"1 mm.04" 1000EXCESSGAIN DISTANCE SME312W Diffuse Mode 07.5 mm15.0 mm22.5 mm 7.5 mm15.0 mm22.5 mm 00.3"0.6"0.9" 0.3"0.6"0.9" DISTANCE SME312WDiffuse Mode Convergent Excess Gain Beam Pattern Excess Gain Beam Pattern 100 10 mm.4" 100 mm4" 1000 mm40"1 mm.04" 1000EXCESSGAIN DISTANCE SME312CV Convergent Mode 01.0 mm2.0 mm3.0 mm 1.0 mm2.0 mm3.0 mm 00.04"0.08"0.12" 0.04"0.08"0.12" DISTANCE SME312CVConvergent Mode 100 10 mm.4" 100 mm4" 1000 mm40"1 mm.04" 1000EXCESSGAIN DISTANCE SME312CV2 Convergent Mode 125 mm5"100 mm4"75 mm3"50 mm2"25 mm1"0 01.0 mm2.0 mm3.0 mm 1.0 mm2.0 mm3.0 mm 00.04"0.08"0.12" 0.04"0.08"0.12" DISTANCE SME312CV2Convergent Mode 100 1 mm.04 in10 mm.4 in 100 mm4 in.1 mm.004 in 1000EXCESSGAIN DISTANCE SME312FPGSME312FPBSME312FPW Diffuse ModePlastic Fiber PBT46U Fiber 01.0 mm2.0 mm3.0 mm 1.0 mm2.0 mm3.0 mm 00.04"0.08"0.12" 0.04"0.08"0.12" DISTANCE SME312CVGSME312CVBSME312CVWConvergent Mode MINI-BEAM SME312 Expert Series 8 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 55214 Rev. G

Excess Gain Beam Pattern Excess Gain Beam Pattern 100 1000 EXCESSGAIN DISTANCE SME312FOpposed ModeGlass Fibers IT23S Fibersw/L9 lenses IT23S FibersIT13S Fibers 500 mm20"400 mm16"300 mm12"200 mm8"100 mm4"0 025 mm50 mm75 mm 25 mm50 mm75 mm 01"2"3" 1"2"3" DISTANCE SME312FOpposed Mode IT13S IT23S 100 10 mm.4" 100 mm4" 1000 mm40"1 mm.04" 1000EXCESSGAIN DISTANCE SME312F Diffuse ModeGlass Fibers BT23S Fiber 00.65 mm1.3 mm1.9 mm 0.65 mm1.3 mm1.9 mm 0.025"0.050"0.075" DISTANCE SME312FDiffuse Mode BT23SBT13S 100 10 mm.40" 100 mm4.0" 1000 mm40"1 mm.04" 1000EXCESSGAIN DISTANCE SME312FV Opposed Mode IT13S FiberIT23S Fiber 250 mm10"200 mm8"150 mm6"100 mm4"50 mm2"0 025 mm50 mm75 mm 25 mm50 mm75 mm 01"2"3" 1"2"3" DISTANCE SME312FVOpposed Mode IT13S IT23S 100 1 mm.04" 10 mm.40" 100 mm4".1 mm.004" 1000EXCESSGAIN DISTANCE SME312FV Diffuse Mode BT23S Fiber BT13S Fiber 00.65 mm1.30mm1.95 mm 0.65 mm1.30 mm1.95 mm 0.025"0.050"0.075" DISTANCE SME312FVDiffuse Mode BT23SBT13S 100 1000EXCESSGAIN DISTANCE SME312FVGSME312FVBSME312FVWDiffuse Mode BT23S Fiber 01.0 mm 1.0 mm 00.04" 2.0 mm 0.08" 0.12" 3.0 mm 0.12" DISTANCE BT23SBT13S SME312FVGSME312FVBSME312FVWDiffuse Mode Plastic Fiber Optic Excess Gain Beam Pattern Excess Gain Beam Pattern 100 10 mm.40" 100 mm4.0" 1000 mm40"1 mm.04" 1000EXCESSGAIN DISTANCE SME312FPOpposed ModePlastic Fibers PIT46U FiberPIT26U Fiber 125 mm5"100 mm4"75 mm3"50 mm2"25 mm1"0 015 mm30 mm45 mm 15 mm30 mm45 mm 00.6"1.2"1.8" 0.6"1.2"1.8" DISTANCE SME312FPOpposed Mode PIT46UPIT26U 100 1 mm.04" 10 mm.4" 100 mm4".1 mm.004" 1000EXCESSGAIN DISTANCE SME312FPDiffuse ModePlastic Fibers PBT46U Fiber 01.2 mm2.5 mm3.8 mm 1.2 mm2.5 mm3.8 mm 00.05"0.10"0.15" 0.05"0.10"0.15" DISTANCE SME312FPDiffuse Mode PBT46UPBT26U MINI-BEAM SME312 Expert Series P/N 55214 Rev. G www.bannerengineering.com - Tel: +1-763-544-3164 9

Excess Gain Beam Pattern Excess Gain Beam Pattern 100 1 mm.04 in10 mm.4 in 100 mm4 in.1 mm.004 in 1000EXCESSGAIN DISTANCE SME312FPGSME312FPBSME312FPW Diffuse ModePlastic Fiber PBT46U Fiber 01.0 mm2.0 mm3.0 mm 1.0 mm2.0 mm3.0 mm 00.04"0.08"0.12" 0.04"0.08"0.12" DISTANCE PBT46U SME312FPGSME312FPBSME312FPWDiffuse ModePlastic Fiber Troubleshooting If the MINI-BEAM Expert’s Power LED alternately flashes red/green, this indicates a microprocessor memory error. To clear the error, re-teach the sensor or cycle the power ON and OFF and re-teach the sensor. If this does not solve the problem, or if it occurs frequently, replace the sensor. Accessories Retroreflective Targets Banner offers a wide selection of high-quality retroreflective targets. See your current Banner Engineering Corp catalog for complete information on available models. Sensing range will vary, according to the retroreflector’s efficiency and reflective area.

  • For long-range applications: model BRT-77X77C reflector provides a range up to 2 m (6.5').
  • For clear object detection (low-contrast applications): reflector model BRT-2X2 is recommended; one comes bundled with each SME312LPC(QD) sensor.
  • Polarized sensors require corner-cube type retroreflective targets only; reflective tape is not recommended. Before installing retroreflective tape, clean the mounting surface with an isopropyl alcohol wipe. Optional brackets for mounting reflective targets are available. See the Accessories section of your current Banner catalog or our website at www.bannerengineering.com. BRT-2X2
  • Square, acrylic target
  • Reflectivity factor: 1.0
  • Max. temperature: +50 °C (+122 ºF)
  • Optional brackets are available
  • Approximate size: 51 mm × 51 mm BRT-77X77C
  • Square, acrylic target
  • Reflectivity Factor: 2.0
  • Temperature: − 20 °C to +60 °C ( − 4 °F to +140 °F)
  • Optional brackets are available
  • Approximate size: 84.5 mm × 84.5 mm 77 mm(3.0") 3.5 mm(0.13") 84.5 mm(3.3") 9 mm(0.4") ClearAcrylicLens BRT-TVHG
  • Reflectivity factor: 0.8
  • Max. Temperature: +60 °C (+140 °F) Retroreflective tape is available in a variety of sizes and shapes; see your Banner Catalog for more information. Not recommended for use with clear object detection sensors. MINI-BEAM SME312 Expert Series 10 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 55214 Rev. G

5-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.50 m (1.5 ft) Straight 44 Typ. ø 14.5 M12 x 1 2 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) MQDC1-506RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 4.57 m (15 ft) MQDC1-530RA 9.14 m (30 ft) Mounting Brackets SMB46L

  • Right-angle
  • L bracket
  • 14-ga. 316 stainless steel 65 27 A Hole center spacing: A = 16.0 Hole size: A = 16.5 × 18.7 SMB46S
  • Right-angle
  • S bracket
  • 14-ga. 316 stainless steel 54 43 6516 A B Hole center spacing: A = 16.0 Hole size: A = 16.5 × 18.7, B = 34.0 × 10.0 SMB46U
  • Right-angle
  • U bracket for sensor protection
  • 14-ga. 316 stainless steel A B Hole center spacing: A = 16.0 Hole size: A = 16.5 × 18.7, B = 34.0 × 13.0 SMB18A
  • Right-angle mounting bracket with a curved slot for versatile orientation
  • 12-ga. stainless steel
  • 18 mm sensor mounting hole
  • Clearance for M4 (#8) hardware A BC Hole center spacing: A to B = 24.2 Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5 MINI-BEAM SME312 Expert Series P/N 55214 Rev. G www.bannerengineering.com - Tel: +1-763-544-3164 11

SMB18AFA..

  • Protective, swivel bracket with tilt and pan movement for precision adjustment
  • Easy sensor mounting to extruded rail T-slots
  • Metric and inch size bolts available
  • Mounting hole for 18 mm sensors 3/8-16 UNC X 2 in. ø19.8 ø18.1 Hole size: B = ø 18.1 Model Bolt Thread (A) SMB18AFA 3/8 - 16 × 2 in SMB18AFAM10 M10 - 1.5 × 50 SMB18Q
  • Right-angle flanged bracket
  • 18 mm sensor mounting hole
  • 12-ga. stainless steel 41 46 A B 30 C Hole center spacing: A to B = 24.2 Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 19.0 SMB18SF
  • 18 mm swivel bracket with M18 × 1 internal thread
  • Black thermoplastic polyester
  • Stainless steel swivel locking hardware included B A Hole center spacing: A = 36.0 Hole size: A = ø 5.3, B = ø 18.0 SMB18UR
  • 2-piece universal swivel bracket
  • 300 series stainless steel
  • Stainless steel swivel locking hardware included
  • Mounting hole for 18 mm sensor 137 64 42 B A C Hole center spacing: A = 25.4, B = 46.7 Hole size: B = 6.9 × 32.0, C = ø 18.3 SMB312PD
  • Right-angle mounting bracket with a curved slot for versatile orientation
  • 12-ga. stainless steel
  • 18 mm sensor mounting hole
  • Clearance for M4 (#8) hardware 41 B C A Hole center spacing: A to B = 24.2 Hole size: A = ø 4.6, B = 17 × 4.6, C = ø 18.5 NOTE: Not for use with plastic fiber optic sensors SMBAMS18RA
  • Right-angle SMBAMS series bracket with 18 mm hole
  • Articulation slots for 90+ ° rotation
  • 12-ga. (2.6 mm) cold- rolled steel A B C Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0 SMBAMS18P
  • Flat SMBAMS series bracket with 18 mm hole
  • Articulation slots for 90+ ° rotation
  • 12-ga. (2.6 mm) cold- rolled steel A B C Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0 SMB30SK
  • Flat-mount swivel bracket with extended range of motion
  • Black reinforced thermoplastic polyester and 316 stainless steel
  • Stainless steel swivel locking hardware included AB Hole center spacing: A = 50.8 Hole size: A = ø 7, B = ø 18 MINI-BEAM SME312 Expert Series 12 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 55214 Rev. G
  • 18 mm swivel side or barrel-mount bracket
  • Black reinforced thermoplastic polyester
  • Stainless steel swivel locking hardware included B A Hole center spacing: A = 50.8 Hole size: A = ø 7.0, B = ø 18.0 SMB30SUS
  • Side-mount swivel with extended range of motion
  • Black reinforced thermoplastic polyester
  • Stainless steel swivel locking hardware included A B Hole center spacing: A = 50.8, B = 24.1 Hole size: A = ø 7, B = ø 7.6 SMB312S
  • Stainless steel 2-axis, side-mount bracket 46 B CA 32 20 × 15.3 SMB312B
  • Stainless steel 2-axis, bottom-mount bracket
  • Includes mounting foot 5124 BCA = 3.1 × 15.2 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Copyright Notice Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any MINI-BEAM SME312 Expert Series www.bannerengineering.com - Tel: +1-763-544-3164