SMDJ UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Features
Description
Applications
Uni-directional Bi-directional Cathode Bi-directional Anode Uni-direction Functional Diagram A Maximum Ratings (TA=25℃ unless otherwise noted) Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V. Junction and Storage Temperature Range Operating Temperature Range 3000 See Next Table 6.0 300 3.5/5.0 -55 to +150 -40 to +125 PPPM IPP PM(AV) IFSM VF TJ ,TSTG TOP Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note 1), (Note 2) Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3) Power Dissipation on Infinite Heat Sink at TL=75°C Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 4) W A W A V Parameter Symbol Value Unit
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/7 Surface Mount Transient Voltage Suppressors (TVS) ROHS SMDJ Series
5.0 To 440V 3000W
VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX Marking Uni Bi 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 19.0 19.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 33.0 33.0 36.0 36.0 40.0 40.0 1000 1000 1000 1000 500 500 200 200 100 100 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 34.0 30.8 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 SMDJ5.0 SMDJ5.0A SMDJ6.0 SMDJ6.0A SMDJ6.5 SMDJ6.5A SMDJ7.0 SMDJ7.0A SMDJ7.5 SMDJ7.5A SMDJ8.0 SMDJ8.0A SMDJ8.5 SMDJ8.5A SMDJ9.0 SMDJ9.0A SMDJ10 SMDJ10A SMDJ11 SMDJ11A SMDJ12 SMDJ12A SMDJ13 SMDJ13A SMDJ14 SMDJ14A SMDJ15 SMDJ15A SMDJ16 SMDJ16A SMDJ17 SMDJ17A SMDJ18 SMDJ18A SMDJ19 SMDJ19A SMDJ20 SMDJ20A SMDJ22 SMDJ22A SMDJ24 SMDJ24A SMDJ26 SMDJ26A SMDJ28 SMDJ28A SMDJ30 SMDJ30A SMDJ33 SMDJ33A SMDJ36 SMDJ36A SMDJ40 SMDJ40A SMDJ5.0C SMDJ5.0CA SMDJ6.0C SMDJ6.0CA SMDJ6.5C SMDJ6.5CA SMDJ7.0C SMDJ7.0CA SMDJ7.5C SMDJ7.5CA SMDJ8.0C SMDJ8.0CA SMDJ8.5C SMDJ8.5CA SMDJ9.0C SMDJ9.0CA SMDJ10C SMDJ10CA SMDJ11C SMDJ11CA SMDJ12C SMDJ12CA SMDJ13C SMDJ13CA SMDJ14C SMDJ14CA SMDJ15C SMDJ15CA SMDJ16C SMDJ16CA SMDJ17C SMDJ17CA SMDJ18C SMDJ18CA SMDJ19C SMDJ19CA SMDJ20C SMDJ20CA SMDJ22C SMDJ22CA SMDJ24C SMDJ24CA SMDJ26C SMDJ26CA SMDJ28C SMDJ28CA SMDJ30C SMDJ30CA SMDJ33C SMDJ33CA SMDJ36C SMDJ36CA SMDJ40C SMDJ40CA RDD RDE RDF RDG RDH RDK RDL PDM PDN PDP PDQ PDR PDS PDT PDU PDV PDW PDX PDY PDZ PED PEE PEF PEG PEH PEK PEL PEM PEN PEP PEQ PER PES PET PEA PEB PEU PEV PEW PEX PEY PEZ PFD PFE PFF PFG PFH PFK PFL PFM PFN PFP PFQ PFR DDD DDE DDF DDG DDH DDK DDL DDM DDN DDP DDQ DDR DDS DDT DDU DDV DDW DDX DDY DDZ DED DEE DEF DEG DEH DEK DEL DEM DEN DEP DEQ DER DES DET DEA DEB DEU DEV DEW DEX DEY DEZ DFD DFE DFF DFG DFH DFK DFL DFM DFN DFP DFQ DFR 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.00 10.00 11.10 11.10 12.20 12.20 13.30 13.30 14.40 14.40 15.60 15.60 16.70 16.70 17.80 17.80 18.90 18.90 20.00 20.00 21.10 21.10 22.20 22.20 24.40 24.40 26.70 26.70 28.90 28.90 31.10 31.10 33.30 33.30 36.70 36.70 40.00 40.00 44.40 44.40 7.30 7.00 8.15 7.37 8.82 7.98 9.51 8.60 10.20 9.21 10.90 9.83 11.50 10.40 12.20 11.10 13.60 12.30 14.90 13.50 16.30 14.70 17.60 15.90 19.10 17.20 20.40 18.50 21.80 19.70 23.10 20.90 24.40 22.10 25.76 23.30 27.10 24.50 29.80 26.90 32.60 29.50 35.30 31.90 38.00 34.40 40.70 36.80 44.90 40.60 48.90 44.20 54.30 49.10 312.50 326.09 263.16 291.26 243.90 267.86 225.56 250.00 209.79 232.56 200.00 220.59 188.68 208.33 177.51 194.81 159.57 176.47 149.25 164.84 136.36 150.75 126.05 139.53 116.28 129.31 111.52 122.95 104.17 115.38 98.36 108.70 93.17 102.74 88.21 97.47 83.80 92.59 76.14 84.51 69.77 77.12 64.38 71.26 60.00 66.08 56.07 61.98 50.85 56.29 46.66 51.64 42.02 46.51 Electrical Characteristics (TA=25℃ unless otherwise noted)
Surface Mount Transient Voltage Suppressors (TVS) ROHS SMDJ Series Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/7 Part Number Uni Bi Reverse Stand-Off Voltage VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX Marking Uni Bi 43.0 43.0 45.0 45.0 48.0 48.0 51.0 51.0 54.0 54.0 58.0 58.0 60.0 60.0 64.0 64.0 70.0 70.0 75.0 75.0 78.0 78.0 80.0 80.0 85.0 85.0 90.0 90.0 100.0 100.0 110.0 110.0 120.0 120.0 130.0 130.0 140.0 140.0 150.0 150.0 160.0 160.0 170.0 170.0 180.0 180.0 190.0 190.0 200.0 220.0 250.0 300.0 350.0 400.0 440.0 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103.0 93.6 107.0 96.8 114.0 103.0 125.0 113.0 134.0 121.0 139.0 126.0 143.2 129.6 151.0 137.0 160.0 146.0 179.0 162.0 196.0 177.0 214.0 193.0 231.0 209.0 250.6 226.8 268.0 243.0 287.0 259.0 304.0 275.0 322.2 291.6 340.1 307.8 324.0 356.0 405.0 486.0 567.0 648.0 713.0 SMDJ43 SMDJ43A SMDJ45 SMDJ45A SMDJ48 SMDJ48A SMDJ51 SMDJ51A SMDJ54 SMDJ54A SMDJ58 SMDJ58A SMDJ60 SMDJ60A SMDJ64 SMDJ64A SMDJ70 SMDJ70A SMDJ75 SMDJ75A SMDJ78 SMDJ78A SMDJ80 SMDJ80A SMDJ85 SMDJ85A SMDJ90 SMDJ90A SMDJ100 SMDJ100A SMDJ110 SMDJ110A SMDJ120 SMDJ120A SMDJ130 SMDJ130A SMDJ140 SMDJ140A SMDJ150 SMDJ150A SMDJ160 SMDJ160A SMDJ170 SMDJ170A SMDJ180 SMDJ180A SMDJ190 SMDJ190A SMDJ200A SMDJ220A SMDJ250A SMDJ300A SMDJ350A SMDJ400A SMDJ440A SMDJ43C SMDJ43CA SMDJ45C SMDJ45CA SMDJ48C SMDJ48CA SMDJ51C SMDJ51CA SMDJ54C SMDJ54CA SMDJ58C SMDJ58CA SMDJ60C SMDJ60CA SMDJ64C SMDJ64CA SMDJ70C SMDJ70CA SMDJ75C SMDJ75CA SMDJ78C SMDJ78CA SMDJ80C SMDJ80CA SMDJ85C SMDJ85CA SMDJ90C SMDJ90CA SMDJ100C SMDJ100CA SMDJ110C SMDJ110CA SMDJ120C SMDJ120CA SMDJ130C SMDJ130CA SMDJ140C SMDJ140CA SMDJ150C SMDJ150CA SMDJ160C SMDJ160CA SMDJ170C SMDJ170CA SMDJ180C SMDJ180CA SMDJ190C SMDJ190CA SMDJ200CA SMDJ220CA SMDJ250CA SMDJ300CA SMDJ350CA SMDJ400CA SMDJ440CA PFS PFT PFU PFV PFW PFX PFY PFZ RGD RGE RGF PGG RGH PGK PGL PGM PGN PGP PGQ PGR PGS PGT PGA PGB PGU PGV PGW PGX PGY PGZ PHD PHE PHF PHG PHH PHK PHA PHB PHL PHM PHN PHP PHQ PHR PHS PHT PHU PHV PHW PHX PHZ PJE PJG PJK PJM DFS DFT DFU DFV DFW DFX DFY DFZ DGD DGE DGF DGG DGH DGK DGL DGM DGN DGP DGQ DGR DGS DGT DGA DGB DGU DGV DGW DGX DGY DGZ DHD DHE DHF DHG DHH DHK DHA DHB DHL DHM DHN DHP DHQ DHR DHS DHT DHU DHV DHW DHX DHZ DJE DJG DJK DJM 47.80 47.80 50.00 50.00 53.30 53.30 56.70 56.70 60.00 60.00 64.40 64.40 66.70 66.70 71.10 71.10 77.80 77.80 83.30 83.30 86.70 86.70 88.80 88.80 94.40 94.40 100.00 100.00 111.00 111.00 122.00 122.00 133.00 133.00 144.00 144.00 155.00 155.00 167.00 167.00 178.00 178.00 189.00 189.00 201.00 201.00 211.00 211.00 224.00 246.00 279.00 335.00 391.00 447.00 492.00 58.40 52.80 61.10 55.30 65.10 58.90 69.30 62.70 73.30 66.30 78.70 71.20 81.50 73.70 86.90 78.60 95.10 86.00 102.00 92.10 106.00 95.80 108.80 97.60 115.00 104.00 122.00 111.00 136.00 123.00 149.00 135.00 163.00 147.00 176.00 159.00 190.40 171.00 204.00 185.00 218.00 197.00 231.00 209.00 244.80 220.00 258.40 232.00 247.00 272.00 309.00 371.00 432.00 494.00 543.00 39.11 43.23 37.36 41.27 35.09 38.76 32.93 36.41 31.15 34.44 29.13 32.05 28.04 30.99 26.32 29.13 24.00 26.55 22.39 24.79 21.58 23.81 20.95 23.15 19.87 21.90 18.75 20.55 16.76 18.52 15.31 16.95 14.02 15.54 12.99 14.35 11.97 13.23 11.19 12.35 10.45 11.58 9.87 10.91 9.31 10.29 8.82 9.75 9.26 8.43 7.41 6.17 5.29 4.63 4.21 Electrical Characteristics (TA=25℃ unless otherwise noted) (Continue)
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Surface Mount Transient Voltage Suppressors (TVS) ROHS SMDJ Series Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Surge Current td - Pulse Width (μs) PPPM - Peak Pulse Power (kW) 100 0.1 0.1 1 10 100 1000 10000 0 25 50 75 100 125 150 175 100 TA-Ambient temperature(°C) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 150 100 IPPM - Peak Pulse Current, % IRSM tr=10µsec Peak Value IPPM Half Value IPPM (IPPM/2) tc 10/1000µsec. Waveform as defined by R.E.A 0 1.0 2.0 3.0 4.0 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM t - Time (ms) 100000 1.0 10.0 100.0 1000.0 1000 100 VBR-Reverse Breakdown Voltage (V) CJ – Junction Capacitance (pF) 10000 Tj=25°C f=1.0MHz Vsig=50mVp-p Bi-directional @zero bins Uni-directional @zero bins Uni-directional @VRWM Bi-directional @VRWM Number of Cycles at 60Hz IFSM-Peak Forward Surge Current (A) 1 10 100 250 200 150 100 300 TJ=TJ max. 8.3 ms Single Half Sine-Wave 5.0 0 25 50 75 100 125 150 175 200 4.0 3.0 2.0 1.0 0.0 TL - Lead Temperature(°C) PM(AV), Steady State Power Dissipation (W) 6.0
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Surface Mount Transient Voltage Suppressors (TVS) ROHS SMDJ Series Physical Specifications Environmental Specifications Weight Case Polarlty Terminal 0.007 ounce, 0.21 gram JEDEC DO-214AB(SMC) Molded Plastic over glass passivated junction Matte Tin-plated leads, Solderable per JESD22-B102D Color band denotes cathode except Bipolar JESD22-A104 JESD22-A102 JESD22-A103 JESD22-A108 JESD22-A106 Temperature Cycle Pressure Cooker High Temp. Storage HTRB Thermal Shock Soldering Parameters V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/Second max 3°C/Second max 217°C 60 -150 Seconds 260 +0/-5°C 20-40 Seconds 6°C/Second Max 8 minutes Max 280°C Reflow Condition Pre Heat -Temperature Min (Ts(min)) -Temperature Max (Ts(max)) - Time (min to max) (TS) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (TS) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (TP) Ramp-down Rate TimeTime to peak temperature ( T25℃ to peak) Preheat Ts(min) Ts(max) TL TL TP Temperature Ramp-up Ramp-down Critical Zone TL toTP TP Ts
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.6/7 Part Numbering SMDJ C Axxx Surface Mount Transient Voltage Suppressors (TVS) ROHS SMDJ Series DO-214AB (SMC) Cathode Band Dimensions Min Max MaxMin Inches Millimeters A B C D E F G H I J K L 0.114 0.260 0.220 0.079 0.030 0.305 0.006 0.129 0.094 0.094 0.126 0. 280 0.245 0.103 0.060 0.008 0.320 0.012 0.165 2.86 6.520 5.520 1.980 0.750 7.640 0.152 3.300 2.400 2.400 3.160 7.020 6.150 2.590 1.510 0.203 8.020 0.305 4.200 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VRWM VOLTAGE SERIES
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Surface Mount Transient Voltage Suppressors (TVS) ROHS SMDJ Series Tape and Reel Specifications 0.061 (1.55) 0.512(13.0) Arbor Hole Diamete Dimensions are in inches (and millimeters) Direction of Feed 0.63 (16.0) Diameter Cover tape 0.315 (8.0) 0.157 (4.0) 0.53 (13.4Ď 13.0 (330.0) 0.78 (19.8)
Ordering Information
Package Quantity Packaging Option SMDJXXXXX DO-214AB 3,000 Packaging Specification Tape & Reel -16mm/13″tape EIA STD RS-481
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.