SMDJ BYTESONIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
l Peak power dissipation 3000W @10 x 1000 us Pulse l Low profile package. l Excellent clamping c apability. l Typical I R less than 2uA when V BR above 12V. l Glass passivated j unction. l Fast response time: typically less than 1.0ps from 0 Volts to BV min l IEC 61000-4-2 ESD 30KV(Air), 30KV(Contact) l ESD protection of data lines in accordance with IEC 61000 -4-2 l EFT protection of data lines in accordance with IEC 61000 -4-4 l Halogen free and RoHS compliant l Lead-free finish Mechanical Characteristics l CASE: SMC (DO-214AB) Molded Plastic over glass passivated junction. l Mounting Position: Any l Polarity: by cathode band denotes uni-directional device, none cathode band denotes bi-directional device. l Terminal: Solder plated Maximum Ratings and Characteristics @ 25°C Ambient Temperature (unless otherwise noted) Parameter Symbol Value Units Peak Pulse Power Dissipation on 10/1000 us Waveform (Note 1, 2, FIG.1) P PPM 3000 W Power Dissipation on Infinite Heat Sink at T L =50°C P D 6.5 W Peak Pulse Current of on 10/1000us Waveform (Note 1, FIG.3) I PPM See Table 1 A Peak Forward Surge Current, 8.3ms Single Half Sine -Wave (Note 2. 3) I FSM 300 A Operating Junction Temperature Range T J -55 to 150 °C Storage Temperature Range T STG -55 to 150 °C Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above T A =25°C per Fig.2. 2. Mounted on 8.0x8.0mm (0.03mm thick) Copper Pads to each terminal. 3. Measured on 8.3ms single half sine-wave, or equivalent square wave, for Unidirectional device only. DO-214AB Dimensions in inches and (millimeters) .320(8.13) .305(7.75) .280(7.11) .260(6.60) .012(0.31) .006(0.15) .124(3.15) .108(2.75) .103(2.62) .079(2.00) .050(1.27) .030(0.76) .245(6.22) .220(5.59) .008 (.203)MAX. 5.0 to 220 Volts ]Watts Peak Power VOLTAGE RANGE 3000 Version 1.0 2017/10/26 http://www.bytesonic.com/
@ Tamb 25°C Type Number Marking Reverse Stand-Off Voltage Breakdown Voltage Min. @I T Breakdown Voltage Max. @ I T Test Current Maximum Clamping Voltage PP Peak Pulse Current Reverse Leakage RMW (Uni) (Bi) (Uni) (Bi) V RMW (V) V BR MIN (V) V BR MAX (V) I T (mA) V C (V) I PP (A) I R (uA) ※ For Bi-directional type having V RWM of 10 Volts and less, the I R limit is double. ※ For parts without A, the VBR is ± 10% and VC is 5% higher than with A parts. Version 1.0 2017/10/26 http://www.bytesonic.com/
Min. @I T Breakdown Voltage Max. @ I T Test Current Maximum Clamping Voltage PP Peak Pulse Current Reverse Leakage RMW (Uni) (Bi) (Uni) (Bi) V RMW (V) V BR MIN (V) V BR MAX (V) I T (mA) V C (V) I PP (A) I R (uA) ※ For Bi-directional type having V RWM of 10 Volts and less, the I R limit is double. ※ For parts without A, the VBR is ± 10% and VC is 5% higher than with A parts. I-V Curve Characteristics P PPM Peak Pulse Power Dissipation - Max power dissipation V RWM Reverse Stand-off Voltage - Maximum voltage that can be applied to TVS without operation V BR Breakdown Voltage – Maximum voltage that flows though the TVS at a specified current (I T V C Clamping Voltage – Peak voltage measured across the TVS at a specified I PPM (peak impulse current) I R Reverse Leakage Current – Current measured at V R V F Forward Voltage Drop for Uni-directional Bi-directional Uni-directional Version 1.0 2017/10/26 http://www.bytesonic.com/
Ratings and Characteristic Curves A =25°C unless otherwise noted ) Fig.1 - Peak Pulse Power Rating Fig.2 - Pulse Derating Cure Fig.3 – Pulse Waveform Fig.4 - Typical Junction Capacitance Version 1.0 2017/10/26 http://www.bytesonic.com/