SMDA03C-5 MCC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in a SO-8 configuration giving protection to 5 Bidirectional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary lighting. These TVS arrays have a peak power rating of 300 watts for an 8/20 µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, and I/O transceivers. The SMDAXXC-5 product provides board level protection from static electricity and other induced voltage surges that can damage sensitive circuitry. FEATURES MECHANICAL

  • Protects up to 5 Bidirectional lines • Molded SO-8 Surface Mount
  • Surge protection Per IEC 1000-4-2, 1000-4-4 • Weight: 0.066 grams (approximate)
  • SO-8 Packaging • Marking: Logo, device number, date code
  • Pin #1 defined by DOT on top of package MAXIMUM RATINGS PACKAGING
  • Operating Temperatures: -550C to +1500C • Tape & Reel EIA Standard 481-1-A
  • Storage Temperature: -550C to +1500C • 13 inch reel 2,500, pieces (OPTIONAL)
  • Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1) • Carrier tubes 95 pcs per (STANDARD)
  • Pulse Repetition Rate: <.01% ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS BREAKDOWN VOLTAGE VBR @1 mA VOLTS CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS LEAKAGE CURRENT ID @ VWM µA CAPACITANCE (f=1 MHz) @0V C pF TEMPERATURE COEFFICIENT OF VBR áVBR mV/°C PART NUMBER DEVICE MARKING MIN MAX MAX MAX TYP MAX SMDA03C-5 SDL5 3.3 4 7 9 200 300 -5 SMDA05C-5 SDB5 5.0 6.0 9.8 11 40 200 3 SMDA12C-5 SDD5 12.0 13.3 19.0 24 1 75 10 SMDA15C-5 SDF5 15.0 16.7 24.0 30 1 50 13 SMDA24C-5 SDH5 24.0 26.7 43.0 55 1 35 30 NOTE: TVS product is normally selected based on its stand off Voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. Application: The SMDAXXC-5 product is designed for transient voltage suppression protection of ESD sensitive components at the board level. It is an ideal product to be used for protection of I/O Transceivers. SMDA03C-5 THRU SMDA24C-5 TVSarrayÔ Ô Series www.mccsemi.com /G01/G02/G03/G04/G05/G06/G07/G05/G08/G08/G09/G04/G03/G02/G0A/G0B/G06/G07omponents

21201 Itasca Street Chatsworth

/G07/G18/G06/G19/G0F/G1A/G0F/G0F /G1B/G15/G05/G1C/G09/G1D/G06/G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G1A /G24/G0A/G25/G1D/G06/G06/G06/G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G19 MCC

Peak Pulse Power Vs Pulse Time Pulse Wave Form MOUNTING PAD SO-8 CIRCUIT DIAGRAM SO-8 PACKAGE 0 10 20 300 100 t -- Time in microsec Ipp -- Peak Pulse Current -- % Ipp Peak Value -- Ipp Half-Value -- Ipp

8 X 20 Waveform

t t d 0.245 MIN 0.045±.005 .160±.005 .050 TYP .030±.005 GND N.C. N.C. INCHES MILLIMETERS MAXMINDIM MAXMIN 0.197 A 0.188 4.77 5.00 0.1580.150 3.81 4.01 0.0690.053 1.35 1.75 0.0210.011 0.28 0.53 0.0500.016 0.41 1.27 0.050 BSC 1.27 BSC 0.0100.006 0.15 0.25 0.0080.004 0.10 0.20 0.2060.189 4.80 5.23 B C D F G J K L 0.244P 0.228 5.79 6.19 www.mccsemi.com MCCSMDA03C-5 thru SMDA24C-5