SMDA03LC PROTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

05074.R6 4/05 www.protekdevices.com LOW CAPACITANCE TVS ARRAY Only One Name Means ProTek’Tion™

APPLICATIONS

✔ SCSI & IDE Interfaces ✔ Parallel & Serial Port Protection (RS-232) ✔ Ethernet - 10/100 Base T ✔ Test & Measurement Equipment ✔ Industrial Control: Low Voltage Sensors IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line)

FEATURES

✔ 500 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Unidirectional & Bidirectional Configurations ✔ Available in Multiple Voltage Types Ranging From 3V to 24V ✔ Protects Up to Four (4) Lines ✔ ESD Protection > 40 kilovolts ✔ LOW CAPACITANCE: 15pF ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 Package ✔ Weight 70 milligrams (Approximate) ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin One Defined By Dot on Top of Package 05074 PIN CONFIGURATIONS SO-8 UNIDIRECTIONAL BIDIRECTIONAL

www.protekdevices.com 05074.R6 4/05 SMDA03LC thru SMDA24LCC DEVICE CHARACTERISTICS Note 1: Only applies to unidirectional devices. MAXIMUM RATINGS @ 25°C Unless Otherwise Specified Operating Temperature SYMBOL VALUE -55°C to 150°C -55°C to 150°C UNITS TJ TSTG PARAMETER Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Watts Forward Voltage @ 50mA, 300µs - Square Wave (Note 1) Volts 1.5 VF Note 1: Part numbers with a “C” suffix are bidirectional devices, i.e., SMDA03LCC. ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) DEVICE MARKING MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @8/20µs VC @ IPP MAXIMUM CAPACITANCE 0V @ 1 MHz C pF SMDA03LC SMDA03LCC SMDA05LC SMDA05LCC SMDA08LC SMDA08LCC SMDA12LC SMDA12LCC SMDA15LC SMDA15LCC SMDA24LC SMDA24LCC SLA SLB SLC SLD SLE SLF SLG SLH SLJ SLK SLL SLM 4.5 4.5 6.0 6.0 8.5 8.5 13.3 13.3 16.7 16.7 26.7 26.7 7.0 7.0 9.8 9.8 13.4 13.4 19.0 19.0 24.0 24.0 43.0 43.0 10.9V @ 43.0A 10.9V @ 43.0A 13.5V @ 42.0A 13.5V @42.0A 16.9V @ 34.0A 16.9V @ 34.0A 25.9V @ 27.0A 25.9V @ 27.0A 30.0V @ 17.0A 30.0V @ 17.0A 49.0V @ 12.0A 49.0V @ 12.0A MAXIMUM LEAKAGE CURRENT @VWM ID µA 125 125 RATED STAND-OFF VOLTAGE VWM VOLTS 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 24.0 24.0

www.protekdevices.com 05074.R6 4/05 SMDA03LC thru SMDA24LCC GRAPHS 0.1 1 10 100 1,000 10,000 td - Pulse Duration - µs 500W 8/20µs Waveform 100 1,000 10,000 PPP - Peak Pulse Power - Watts FIGURE 1 PEAK PULSE POWER VS PULSE TIME FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR SMDA05LC ESD Test Pulse: 5 kilovolt, 1/30ns (waveform)

5 Volts per Division

-20 -10 0 25 50 75 100 125 150 TL - Lead Temperature - °C 100 % Of Rated Power Peak Pulse Power 8/20µs Average Power FIGURE 3 POWER DERATING CURVE 0 5 10 15 20 25 30 t - Time - µs 100 120 IPP - Peak Pulse Current - % of IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs tf Peak Value IPP e-t td = t IPP/2 FIGURE 2 PULSE WAVE FORM

www.protekdevices.com 05074.R6 4/05 SMDA03LC thru SMDA24LCC COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. PACKAGE OUTLINE & DIMENSIONS ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., SMDA05LC-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., SMDA05LC-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., SMDA05LC-LF-T7. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. Outline & Dimensions: Rev 1 - 11/01, 06009 A B C D F G J K P R 4.80 3.80 1.35 0.35 0.40

1.27 BSC

0.18 0.10 5.80 0.25 5.00 4.00 1.75 0.49 1.250 0.25 0.25 6.20 0.50 0.189 0.150 0.054 0.014 0.016

0.05 BSC

0.007 0.004 0.229 0.010 0.196 0.157 0.068 0.019 0.049 0.009 0.008 0.244 0.019 DIM MIN MAX MIN MAX MILLIMETERS INCHES PACKAGE DIMENSIONS NOTES 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusion. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. -A- P -B- D G -T- K C R X 45º J F 0º - 10º 0.010” (0.25 MM) M B M 4 PL 0.010” (0.25 MM) S B M 8 PL T A S PACKAGE OUTLINE SO-8 0.030” ± 0.005” 0.050” ± 0.005” 0.160” ± 0.005” 0.045” ± 0.005” 0.245” MIN MOUNTING PAD