SMD0603 SHOULDER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Http://www.shoulder.cn SHOULDER ELECTRONICS LIMITED Page: 1 SHOULDER ELECTRONICS LIMITED CRYSTAL RESONATOR Data Sheet PRODUCT 产 品: CRYSTAL RESONATOR MODEL NO 型 号: SMD0603 PREPARED 编 制: Fengyu CHECKED 审 核: York APPROVED 批 准: Lijiating DATE 日 期: 2008-01-25
- Feature z RoHS Compliant(Lead Free) z Surface Mount Package z High precision characteristic covering up to high frequency range z Higher frequency stability and reliability z Tape and Reel available 2. Specification Type SMD0603 Frequency Range 10.00 ~ 160.00 MHz Overtone See table Frequency Tolerance (25±3˚C) ±10/±15/±20/± 30 ppm Temperature Characteristics (in reference to +25˚C) ±10/±15/±20/± 30 ppm Operating Temperature Range –10 ~ +60˚C ESR See table Drive Level 10 µW (100 µW max) Standard Load Capacitance 10 /20 /30 pF Operable Temperature Range –40 ~ +85˚C Table equivalent series resistance(Ω) Overtone Frequency Range(MHz) Equivalent Series Resistance (Ω) Fundamental 10 ~ 40 60 max 3rd overtone 40 ~ 160 100 max Http://www.shoulder.cn SHOULDER ELECTRONICS LIMITED Page: 2
- Dimensions 4. Reliability Characteristics Item Condition Specifications
4.1 Solderability Solder bath temperature:260℃ ,
duration:5 seconds, Solder: 100% tin A new uniform coating of solder shall cover a minimum of 95% of the end surface .
4.2 Resistance
Solder temperature 260+/-3 ℃,Immersion time:10 S Solder bath composition:100% tin No electrical and mechanical damage. Electrical characteristics shall be satisfied.
4.3 Vibration The frequency r ange: from 10Hz to 55Hz and
Amplitude: 1.5mm This motion shall be applied for a period of 2 h in each of 3 mutually perpendicular axes ( total of 6h) No electrical and mechanical damage. Electrical characteristics shall be satisfied. Http://www.shoulder.cn SHOULDER ELECTRONICS LIMITED Page: 3
4.4 Drop test Drop from 75c m height on 3cm hard wooden
shall be satisfied.
4.5 Cold Storage The unit shall be stored at a temperature of
–40+/-3℃ for 500 H. then it shall be subjected to standard atmospheric conditions for 1h after which measurement shall be made. Electrical characteristics shall be satisfied.
4.6 High
(steady state) The unit shall be stored at a temperature of 40+/-2℃ with relative humidity of 95% for 500h, then it shall be subjected to standard atmospheric conditions for 2h after which measurement shall be made. Electrical characteristics shall be satisfied. The unit shall be subjected to 50 successive Change of temperature cycles. Each as shown in table below, then it shall be subjected to standard atmospheric conditions for 1h after which measurement shall be made. Temperature Duration 1 -40+/-3℃ 15minutes 2. 100+/-2℃ 15minutes
4.7 Thermal
- Transition time Within 10 seconds Electrical characteristics shall be satisfied.
4.8 Sealing Helium leakage detector shall used to measure
the leakage rate of gas through any faulty seal. Pressure: 500Kpa, duration:120 minutes Leakage rate ≤ 1*10-9 Pa.m3/S
4.9 High
The unit shall be stored at a temperature of 85+/-3℃ for 720h,then it shall be subjected to standard atmospheric condition for 1h after which measurement shall be made. Electrical characteristics shall be satisfied.
4.10 Salt spray
Temperature +35 ℃±2℃ Duration 48 hours N a C I % 5 % No rust. Electrical characteristics shall be satisfied. Http://www.shoulder.cn SHOULDER ELECTRONICS LIMITED Page: 4
4.11 Soldering
temperature: Solder with lead: 240℃+/-5 Solder without lead:260℃+/-5 5. Package A B C D E F G H J K L M N P Q R Quantity SMD 0603 ø60 +1 13.0±0.3 16.5 max 1000 Http://www.shoulder.cn SHOULDER ELECTRONICS LIMITED Page: 5