SMD050-2018 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 Circuit Protection® PTC Devices Overcurrent Protection Device PRODUCT: SMD050-2018 DOCUMENT: SCD 24697 PCN: 175564 REV LETTER: E REV DATE: JANUARY 22, 2002 PAGE NO.: 1 OF 1 Specification Status: Released Maximum Electrical Ratings Voltage: 57 VDC Current: 10 A Marking: Manufacturer’s Mark Part Identification A05 Notes: 1. All metal surfaces are tin plated. 2. Devices cannot be wave soldered. 3. Drawing not to scale. D A E B C F TABLE I. DIMENSIONS: A B C D E F MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX *Rounded off approximation TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS TIME TO TRIP RESISTANCE VALUES TRIPPED-STATE POWER DISSIPATION** AMPERES AT 0°C AMPERES AT 20°C AMPERES AT 70°C SECONDS AT 20°C, 2.5A OHMS AT 20°C WATTS AT 20°C HOLD TRIP HOLD TRIP HOLD TRIP MAX MIN MAX* MAX *Maximum resistance is measured 1 hour after reflow **Values specified were determined using PCB's with 0.030"x1.5ounce copper traces Reference Documents: PS300, E.N. SMD 1.0x Precedence: This specification takes precedence over documents referenced herein. Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid. CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.