SMD030 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025 Phone: 800-227-4856 Fax: 800-227-4866 PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: SMD030 DOCUMENT: SCD 21827 PCN: 068731 REV LETTER: I REV DATE: MAY 31, 2002 PAGE NO.: 1 OF 1 Specification Status: Released Maximum Electrical Ratings Operating Voltage / Interrupt Current 60V / 10A 12V / 60A 5V / 125A Marking: Manufacturer’s Mark Part Identification 030 Notes: 1. All metal surfaces are tin plated. 2. Devices cannot be wave soldered. 3. Drawing not to scale. H D A E B C G F TABLE I. DIMENSIONS: A B C D E F G H MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN *Rounded off approximation TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS TIME TO TRIP RESISTANCE VALUES TRIPPED-STATE POWER DISSIPATION** AMPS AT 0°C AMPS AT 20°C AMPS AT 60°C SECONDS AT 20°C, 1.5 A OHMS AT 20°C WATTS AT 20°C HOLD TRIP HOLD TRIP HOLD TRIP MAX MIN MAX* MAX * Maximum resistance is measured 1 hour after reflow. ** Values specified were determined using PCB’s with 0.070”X1.5 ounce copper traces. Reference Documents: PS300, E.N. SMD 1.0x Precedence: This specification takes pr ecedence over documents referenced herein. Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid. CAUTION: Operation beyond the rated volt age or current may result in rupture, electrical arcing or flame.