SMD-C5

SMD-C8 SYNERGY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

[ 76 ] MIXERS TRIPLE-BALANCED MIXERS TRIPLE-BALANCED

201 McLean Boulevard • Paterson, New Jersey 07504  Tel: (973) 881-8800  Fax: (973) 881-8361

E-Mail: sales@synergymwave.com  World Wide Web: http://www.synergymwave.com 10 - 1000 5 - 500 6/7.5 7/8 50/40 40/30 30/20 40/25 30/18 25/15 102 4 CLP-2P4 0.05 - 1500 0.05 - 500 6/7.5 7/9 25/20 35/25 30/20 25/20 35/25 25/15 102 3 CLP-2H5 0.05 - 2000 0.05 - 500 6/8 7/9 25/20 40/30 30/20 25/20 40/30 25/15 102 3 CLP-2B6 10 - 2500 10 - 1000 7/8 7.5/8.5 55/35 45/30 35/25 35/20 35/20 27/20 103 3 CLP-205 500 - 3700 500 - 1000 --/-- 9.5/11.5 45/25 45/25 45/25 40/20 40/20 40/20 103 3 CLP-210 10 - 2000 10 - 1000 6/8 6.5/8 32/25 35/25 35/25 33/20 30/20 30/20 105 5 CLP-3E6 10 - 2500 10 - 1000 7/8 7.5/8.5 55/35 45/30 35/25 35/20 30/20 27/20 105 6 CLP-305 10 - 3000 10 - 800 6.3/8 6.5/8.5 35/25 35/25 35/25 30/20 30/20 30/20 105 5 CLP-3B8 500 - 3700 500 - 1000 --/-- 9.5/11.5 45/25 45/25 45/25 40/20 40/20 40/20 105 6 CLP-310 1 - 2500 1 - 2000 6.5/8.5 8.0/9.5 45/35 35/25 28/20 40/30 26/20 22/16 133 2 SMD-C8 5 - 1000 5 - 1000 6.5/8 7.5/9.5 35/20 40/30 30/23 30/20 30/20 25/20 159 1 SLD-K5 25 - 1800 25 - 1000 7.5/8.5 8/9 50/30 45/25 35/20 30/15 25/15 23/15 133 2 SMD-C5 IMPROVED DYNAMIC RANGELO = +10 dBm THROUGH H OLE (RELAY) NOTES: 1. 1dB Compression Point = +5 dBm (Typ) 2. IP3 (Input) = +18 dBm (Typ) 3. As IF frequency decrease below LF towards DC, conversion loss increases up to 8 dB higher than maximum. 4. Maximum Input Power without damage = 250 mW ave. cw /lozenge6 LO Frequency is specified from 600 to 2595 MHz ** UB identifies the full bandwidth specification SURFACE M OUNT FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) RF/LO IF XMB TYP/MAX FULL BAND TYP/MAX LB TYP/MIN MB TYP/MIN UB TYP/MIN LB TYP/MIN MB TYP/MIN UB TYP/MIN LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) PACKAGE MODELPIN OUT FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) RF/LO IF XMB TYP/MAX FULL BAND TYP/MAX LB TYP/MIN MB TYP/MIN UB TYP/MIN LB TYP/MIN MB TYP/MIN UB TYP/MIN LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) PACKAGE MODELPIN OUT ALL MODELS MODEL SMD-C7 XMB= 2LF to HF/2 XMB = 750 - 1000 MHz FULL BAND = LF to HF LB = 750 - 1200 MHz LB= LF to 10LF UB =1200 - 2500 MHz MB = 10LF to HF/2 UB= HF/2 to HF # 5 4 1 233 - - # 6 1 4 233 - - RF LO IF GND CASE GND NO CONN. PIN-OUT TABLE GND = Ground externally For pin location and package outline drawings, see back pages. *Connect pins together externally. 159 133 103102 105

[ 77 ]

201 McLean Boulevard  Paterson, New Jersey 07504  Tel: (973) 881-8800  Fax: (973) 881-8361

E-Mail: sales@synergymwave.com  World Wide Web: http://www.synergymwave.com MIXERS TRIPLE-BALANCED MIXERS TRIPLE-BALANCED IMPROVED DYNAMIC RANGELO = +10 dBm THROUGH H OLE (TO -CAN) 10-2500 10-1000 7/8 7.5/8.5 55/35 45/30 35/25 35/20 30/20 27/20 104 1 CLP-505 10-2500 10-1000 7/8 7.5/8.5 55/35 45/30 35/25 35/20 30/20 27/20 122 2 CLP-605 500-3700 500-1000 --/-- 9.5/11.5 45/25 45/25 45/25 40/20 40/20 40/20 122 2 CLP-610 10 - 2500 10 - 1000 7/8 7.5/8.5 55/35 45/30 35/25 35/20 30/20 27/20 101 3 CLF-105 500 - 3700 500 - 1000 --/-- 9.5/11.5 45/25 45/25 45/25 40/20 40/20 40/20 101 3 CLF-110 10 - 2000 10 - 1000 6/8 6.5/8.5 32/25 35/25 35/20 33/20 30/20 25/20 110 4 CLK-7A6S /square6 10 - 2500 10 - 1000 7/8 7.5/8.5 55/35 45/30 35/20 35/20 30/20 27/20 110 4 CLK-705S 10 - 3000 10 - 800 6.3/8 6.5/8.5 35/25 35/25 35/25 30/20 30/20 30/20 110 4 CLK-7B8S 500 - 3700 500 - 1000 --/-- 9.5/11.5 45/25 45/25 45/25 40/20 40/20 40/20 110 4 CLK-710S NOTES: 1. 1dB Compression Point = +5 dBm (Typ) 2. IP3 (Input) = +18 dBm (Typ) 3. As IF frequency decrease below LF towards DC, conversion loss increases up to 8 dB higher than maximum 4. Maximum Input Power without damage = 250 mW ave. cw GND = Ground externally For pin location and package outline drawings, see back pages. F LAT PACK C OAXIAL * Connector style: "B" = BNC, "T" = TNC, "N" = Type N, "S" = SMA /square6 Double Balanced Model (IP3 & 1dB comp. pt. 3 dB lower than specified.) FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) RF/LO IF XMB TYP/MAX FULL BAND TYP/MAX LB TYP/MIN MB TYP/MIN UB TYP/MIN LB TYP/MIN MB TYP/MIN UB TYP/MIN LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) PACKAGE MODELPIN OUT FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) RF/LO IF XMB TYP/MAX FULL BAND TYP/MAX LB TYP/MIN MB TYP/MIN UB TYP/MIN LB TYP/MIN MB TYP/MIN UB TYP/MIN LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) PACKAGE MODELPIN OUT FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) RF/LO IF XMB TYP/MAX FULL BAND TYP/MAX LB TYP/MIN MB TYP/MIN UB TYP/MIN LB TYP/MIN MB TYP/MIN UB TYP/MIN LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) OUTLINE DRAWING MODELPIN OUT XMB= 2LF to HF/2 FULL BAND = LF to HF LB= LF to 10LF MB = 10LF to HF/2 UB= HF/2 to HF 123 #1 2 5 11 All Others All Others -- #2 1 3 2 4 4 -- #3 1 4 5 All Others All Others -- # 4 132 - - - - RF LO IF GND CASE GND NO CONN. PIN-OUT TABLE 104 122