SMCJ1.5KE36CA-TP MCC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

For surface mount applicationsin in ordertooptimize board space Fast response time: typical less than 1.0ps from 0 volts to Mechanical Data /circle6 Terminals: solderable per MIL-STD-750, Method 2026 /circle6 Polarity: Color band denotespositive end (cathode) except Bidirectional /circle6 Maximum soldering temperature: 260oC for 10 seconds Maximum Ratings @ 25oC Unless Otherwise Specified Peak Pulse Current on 10/1000us waveform IPP See Table 1 Note: 2 Peak Pulse Power Dissipation PPP 1500W Note: 2 Peak Forward Surge Current I FSM) 200A Note: 4 Operation And Storage Temperature Range TJ, TSTG -55oC to +175oC NOTES: 2.Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig.2. 3.Mounted on 8.0mm 2 copper pads to each terminal. 4.8.3ms, single half sine wave duty cycle=4 pulses per. Minute maximum. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Transient Voltage Suppressor 6.8 to 550 Volts

1500 Watt

Excellent clamping capability /G01/G02/G03/G04/G05/G06/G07/G05/G08/G08/G09/G04/G03/G02/G0A/G0B/G06/G07omponents

20736 Marilla Street Chatsworth

/G07/G18/G06/G19/G0F/G1A/G0F/G0F /G1B/G15/G05/G1C/G09/G1D/G06/G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G1A /G24/G0A/G25/G1D/G06 /G06 /G06 /G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G19 Revision: D 2013/01/01 DIMENSIONS INCHES MM DIM MIN MAX MIN MAX NOTE A .079 .103 2.00 2.62 B .108 .128 2.75 3.25 C .002 .008 0.051 0.203 D .006 .012 0.152 0.305 E .030 .050 0.76 1.27 G .260 .280 6.60 7.11 H .220 .245 5.59 6.22 0.070” 0.190 0.125” SUGGESTED SOLDER PAD LAYOUT G H E D F Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Typical Thermal Resistance Junction RthJL 15 oC/W A B C DO-214AB (SMCJ) (LEAD FRAME)UL Recognized File # E331408 www.mccsemi.com 1 of 5 Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. to Lead Typical Thermal Resistance Junction RthJA 75oC/W to Ambient MCC TM Micro Commercial Components

  • Halogen free available upon request by adding suffix "-HF" VBR minimum Low inductance
  • Low profile package

ELECTRICAL CHARACTERISTICS @25°C MCC PART NUMBER REVERSE STAND-OFF VOLTAGE VWM BREAKDOWN VOLTAGE V(BR) @ IT (VOLTS) MAXIMUM CLAMPING VOLTAGE @ IPP PEAK PULSE CURRENT IPP MAXIMUM REVERSE LEAKAGE @V WM ID MARKING CODE (VOLTS) MIN MAX I T (mA) (VOLTS) (AMPS) (µA) SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A MC C For bi-directional type having Vrwm of 10 volts and less, the IR limit is double. The available parts are “A” type only, the parts without A (VBR is /g10210%) is not available. Revision: D 2013/01/01 TM Micro Commercial Components www.mccsemi.com 2 of 5

ELECTRICAL CHARACTERISTICS @25°C MCC PART NUMBER REVERSE STAND-OFF VOLTAGE VWM BREAKDOWN VOLTAGE V(BR) @ IT (VOLTS) MAXIMUM CLAMPING VOLTAGE @ IPP PEAK PULSE CURRENT IPP MAXIMUM REVERSE LEAKAGE @V WM ID MARKING CODE (VOLTS) MIN MAX I T (mA) (VOLTS) (AMPS) (µA) SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A MC C For bi-directional type having Vrwm of 10 volts and less, the IR limit is double. The available parts are “A” type only, the parts without A (VBR is /g10210%) is not available. Revision: D 2013/01/01 TM Micro Commercial Components www.mccsemi.com 3 of 5

Revision: D 2013/01/01 SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A MC C TM Micro Commercial Components www.mccsemi.com 4 of 5 C J — Junction Capacitance (pF) Fig. 4 – Typical Junction Capacitance Uni-Directional 100 0 7525 50 100 125 150 175 200 Peak Pulse Power (PPP ) or Current (IPP ) Derating in Percentage, % TA — Ambient Temperature (°C) 100 1,000 10,000 20,000 101 100 400 VWM — Reverse Stand-Off Voltage (V) Fig. 2 – Pulse Derating Curve PPPM — Peak Pulse Power (kW) Fig. 1 – Peak Pulse Power Rating Curve 0.1 100 0.1µs 1.0µs1 0 µs td — Pulse Width (sec.) 100µs 1.0ms 10ms Copper Pad Areas TJ = 25°C f = 1.0MHz Vsig = 50mVp-p Measured at Zero Bias VR , Measured at Stand-Off Voltage, VWM Fig. 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Use Only 1 10 100 100 200 Peak Forward Surge Current, Amperes Number of Cycles at 60Hz 8.3ms Single Half Sine-Wave (JEDEC Method) T J = TJ max. Uni-Directional Bi-Directional tp — Pulse Duration (sec) Transient Thermal Impedance (°C/W) Fig. 5 – Typical Transient Thermal Impedance 0.1 1.0 100 0.001 0.01 0.1 1 10 100 1000 100 150 IPPM — Peak Pulse Current, % IRSM Fig. 3 – Pulse Waveform TJ = 25°C Pulse Width (td) is defined as the point where the peak current decays to 50% of I PPM tr = 10µsec. Peak Value IPPM Half Value — IPP IPPM 2 td 10/1000µsec. Waveform as defined by R.E.A. 0 1.0 2.0 3.0 4.0 t — Time (ms) Ratings and Characteristic Curves(TA = 25°C unless otherwise noted)

Revision: D 2013/01/01 TM Micro Commercial Components www.mccsemi.com 5 of 5 Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Ordering Information : Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF