SMCJ

SMCJ UNIOHM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATINGS SYMBOL VALUE UNITS Peak Power Dissipation at TA=25 C, TP=1ms(NOTE 1) PPK Minimum 1500 Watts

FEATURES

Peak Forward Surge Current at 8.3ms Single Half Sine-Wave Maximum Instantenous Forward Voltage at 35.0A for superimposed on rated load (JEDEC method) (NOTE 3) Unidirectional only Operating and Storage Temperature Range TJ, TSTG -55 to +150 C * For surface mount application 1.0ps from 0 volt to BV min. * High temperature soldering guaranteed:

260 C / 10 seconds at terminals

• Typical IR less than 1 A above 10V * Fast response time: Typically less than * Built-in strain relief * Excellent clamping capability * Low profile package * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end except Bidirectional * Mounting position: Any Weight: 0.21 grams SMCJ SERIES VOLTAGE RANGE 5.0 to 170 Volts

1500 Watts Peak Power

VF 3.5 Volts NOTES: 1. Non-repetitive current pulse per Fig. 3 and derated above TA=25 C per Fig. 2. 2. Mounted on Copper Pad area of 8.0mm (.013mm Thick) to each terminal. 3. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum. DEVICES FOR BIPOLAR APPLICATIONS 1. For Bidirectional use C or CA Suffix for types SMCJ5.0 thru SMCJ170. 2. Electrical characteristics apply in both directions. DO-214AB Dimensions in inches and (millimeters) .320(8.13) .305(7.75) .280(7.11) .260(6.60) .012(0.31) .006(0.15) .124(3.15) .108(2.75) .103(2.62) .079(2.00) .050(1.27) .030(0.76) .245(6.22) .220(5.59) .008 (.203)MAX.

RATING AND CHARACTERISTIC CURVES (SMCJ SERIES) PPPM, PEAK PULSE POWER, KWIPPM, PEAK PULSE CURRENT, % FIG.1-PEAK PULSE POWER DERATING CURVE 0.1ms 1.0ms 10ms 100ms 1.0ms 10ms 0.1 1.0 100 td, PULSE WIDTH, sec. Non-Repetitive Pulse Waveform Shown in Fig. 3 TA=25 C FIG.2-PULSE DERATING CURVE PEAK PULSE POWER(PPP) OR CURRENT(IPP) DERATING IN PERCENTAGE TA, AMBIENT TEMPERATURE ( C) 0 25 50 75 100 125 150 175 100 FIG.3-PULSE WAVE FORM 0 1.0 2.0 3.0 4.0 t, TIME, ms 100 150 td e-kt Tf=10 s Peak Value IPPM Half Value-IPPM TA=25 C Pulse Width (td) is defined as the point where the Peak Current Deacys to 50% of Ipp FIG.5-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz 100 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES TJ=TJmax 8.3ms Single Half Sine-wave JEDEC Method 5.0mm COPPER PAD AREAS FIG.4-TYPICAL JUNCTION CAPACITANCE 1.0 2.0 5.0 10 20 50 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS 100 200 500 1,000 2,000 5,000 10,000 Measured at Stand-Off Voltage(VMW) Measued at Zero Bias TJ=25 C f=1.0MHz Vsig=50mVp-p CJ, CAPACITANCE, pF 10/1000 sec Waveform as Defined by R.E.A.

SMCJ54(C) 54 60.0 76.00 1 96.3 15.6 5 GGD BGD SMCJ48(C) 48 53.3 67.50 1 85.5 17.5 5 GFW BFW SMCJ43(C) 43 47.8 60.50 1 76.7 19.6 5 GFS BFS SMCJ36(C) 36 40.0 50.70 1 64.3 23.3 5 GFN BFN SMCJ30(C) 30 33.3 42.20 1 53.5 28.0 5 GFH BFH SMCJ26(C) 26 28.9 36.60 1 46.6 32.2 5 GFD BFD SMCJ22(C) 22 24.4 30.90 1 39.4 38.1 5 GEW BEW SMCJ18(C) 18 20.0 25.30 1 32.2 46.6 5 GES BES SMCJ16(C) 16 17.8 22.60 1 28.8 52.1 5 GEN BEN SMCJ14(C) 14 15.6 19.80 1 25.8 58.1 5 GEH BEH SMCJ12(C) 12 13.3 16.90 1 22.0 68.2 5 GED BED SMCJ10(C) 10 11.1 14.10 1 18.8 79.8 5 GDW BDW SMCJ54(C)A 54 60.0 69.00 1 87.1 17.2 5 GGE BGE SMCJ48(C)A 48 53.3 61.30 1 77.4 19.4 5 GFX BFX SMCJ43(C)A 43 47.8 54.90 1 69.4 21.6 5 GFT BFT SMCJ36(C)A 36 40.0 46.00 1 58.1 25.8 5 GFP BFP SMCJ30(C)A 30 33.3 38.30 1 48.4 31.0 5 GFK BFK SMCJ26(C)A 26 28.9 33.20 1 42.1 35.6 5 GFE BFE SMCJ22(C)A 22 24.4 28.00 1 35.5 42.2 5 GEX BEX SMCJ18(C)A 18 20.0 23.30 1 29.2 51.4 5 GET BET SMCJ16(C)A 16 17.8 20.50 1 26.0 57.7 5 GEP BEP SMCJ14(C)A 14 15.6 17.90 1 23.2 64.7 5 GEK BEK SMCJ12(C)A 12 13.3 15.30 1 19.9 75.3 5 GEE BEE SMCJ10(C)A 10 11.1 12.80 1 17.0 88.2 5 GDX BDX SMCJ58(C)A 58 64.4 74.10 1 93.6 16.0 5 GGG BGG SMCJ51(C)A 51 56.7 65.20 1 82.4 18.2 5 GFZ BFZ SMCJ45(C)A 45 50.0 57.50 1 72.7 20.6 5 GFV BFV SMCJ40(C)A 40 44.4 51.10 1 64.5 23.2 5 GFR BFR SMBJ33(C)A 33 36.7 42.20 1 53.3 28.1 5 GFM BFM SMCJ28(C)A 28 31.1 35.80 1 45.4 33.0 5 GFG BFG SMCJ24(C)A 24 26.7 30.70 1 38.9 38.6 5 GEZ BEZ SMCJ20(C)A 20 22.2 25.50 1 32.4 46.3 5 GEV BEV SMCJ17(C)A 17 18.9 21.70 1 27.6 53.3 5 GER BER SMCJ15(C)A 15 16.7 19.20 1 24.4 61.5 5 GEM BEM SMCJ13(C)A 13 14.4 16.50 1 21.5 69.7 5 GEG BEG SMCJ11(C)A 11 12.2 14.00 1 18.2 82.4 5 GDZ BDZ SMCJ58(C) 58 64.4 81.60 1 103 14.6 5 GGF BGF SMCJ51(C) 51 56.7 71.80 1 91.1 16.5 5 GFY BFY SMCJ45(C) 45 50.0 63.30 1 80.3 18.7 5 GFU BFU SMCJ40(C) 40 44.4 56.30 1 71.4 21.0 5 GFQ BFQ SMCJ33(C) 33 36.7 46.50 1 59.0 25.2 5 GFL BFL SMCJ28(C) 28 31.1 39.40 1 50.0 30.0 5 GFF BFF SMCJ24(C) 24 26.7 33.80 1 43.0 34.9 5 GEY BEY SMCJ20(C) 20 22.2 28.10 1 35.8 41.9 5 GEU BEU SMCJ17(C) 17 18.9 23.90 1 30.5 49.2 5 GEQ BEQ SMCJ15(C) 15 16.7 21.10 1 26.9 55.8 5 GEL BEL SMCJ13(C) 13 14.4 18.20 1 23.8 63.0 5 GEF BEF SMCJ11(C) 11 12.2 15.40 1 20.1 74.6 5 GDY BDY

1500 Watt Surface Mount TVS

PART NUMBER REVERSE BREAKDOWN BREAKDOWN TEST MAXIMUM PEAK REVERSE MARKING ADD C FOR BI- STAND-OFF VOLTAGE VOLTAGE CURRENT CLAMPING PULSE LEAKAGE CODE DIRECTIONAL VOLTAGE VBR (V) VBR (V) IT VOLTAGE CURRENT @ VRWM See Note 1 VRWM (V) MIN. @IT MAX. @IT (mA) @Ipp Vc (V) Ipp (A) IR( A) UNI BI

SMCJ60(C) 60 66.7 84.5 1 107 14.0 5 GGH BGH SMCJ160(C) 160 178 226.0 1 287 5.2 5 GHN BHN SMCJ130(C) 130 144 182.5 1 231 6.5 5 GHH BHH SMCJ110(C) 110 122 154.5 1 196 7.7 5 GHD BHD SMCJ90(C) 90 100 126.5 1 160 9.4 5 GGW BGW SMCJ78(C) 78 86.7 109.8 1 139 10.8 5 GGS BGS SMCJ70(C) 70 77.8 98.6 1 125 12.0 5 GGN BGN SMCJ60(C)A 60 66.7 76.7 1 96.8 15.5 5 GGK BGK SMCJ160(C)A 160 178 205.0 1 259 5.8 5 GHP BHP SMCJ130(C)A 130 144 165.5 1 209 7.2 5 GHK BHK SMCJ110(C)A 110 122 140.5 1 177 8.4 5 GHE BHE SMCJ90(C)A 90 100 115.5 1 146 10.3 5 GGX BGX SMCJ78(C)A 78 86.7 99.7 1 126 11.4 5 GGT BGT SMCJ70(C)A 70 77.8 89.5 1 113 13.3 5 GGP BGP SMCJ64(C)A 64 71.1 81.8 1 103 14.6 5 GGM BGM SMCJ170(C)A 170 189 217.5 1 275 5.5 5 GHR BHR SMCJ150(C)A 150 167 192.5 1 243 6.2 5 GHM BHM SMCJ120(C)A 120 133 153.0 1 193 7.9 5 GHG BHG SMCJ100(C)A 100 111 128.0 1 162 9.3 5 GGZ BGZ SMCJ85(C)A 85 94.4 108.2 1 137 10.4 5 GGV BGV SMCJ75(C)A 75 83.3 95.8 1 121 12.4 5 GGR BGR SMCJ64(C) 64 71.1 90.1 1 114 13.2 5 GGL BGL SMCJ170(C) 160 189 239.5 1 304 4.9 5 GHQ BHQ SMCJ150(C) 150 167 211.5 1 268 5.6 5 GHL BHL SMCJ120(C) 120 133 169.0 1 214 7.0 5 GHF BHF SMCJ100(C) 100 111 141.0 1 179 8.4 5 GGY BGY SMCJ85(C) 85 94.4 119.2 1 151 9.9 5 GGU BGU SMCJ75(C) 75 83.3 105.7 1 134 11.2 5 GGQ BGQ PART NUMBER REVERSE BREAKDOWN BREAKDOWN TEST MAXIMUM PEAK REVERSE MARKING ADD C FOR BI- STAND-OFF VOLTAGE VOLTAGE CURRENT CLAMPING PULSE LEAKAGE CODE DIRECTIONAL VOLTAGE VBR (V) VBR (V) IT VOLTAGE CURRENT @ VRWM See Note 1 VRWM (V) MIN. @IT MAX. @IT (mA) @Ipp Vc (V) Ipp (A) IR( A) UNI BI