SMCJ

SMCJ PACELEADER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS SMC/DO-214AB Dimensions in inches and (millimeters) .002(.051) .008(.203) .006(.152) .012(.305) .305(7.75) .320(8.13) .079(2.00) .103(2.62) .030(0.76) .050(1.27) .260(6.60) .280(7.11) .220(5.59) .245(6.22) .108(2.75) .128(3.25) www.paceleader.tw SMCJ Series PEAK PULSE POWER 1500 WATTS REVERSE VOLTAGE 6.8 to 520 Volts 1500W peak pulse power capability with a Low leakage Uni and Bidirectional unit Glass passivated chip Very fast response time Excellent clamping capability μ s waveform, repetitive rate (duty cycle):0.01% Case Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, method 2026 Polarity Color band denotes cathode end except Bipolar Mounting position: Any Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Rating at 25℃ ambient temperature unless otherwise speci f Note: Volts Amps. 6.5 200 P PP I PP I FSM Watts Value Minimum 1500 Parameter Amps. UNIT Symbol (2) VF= 3.5V on SMCJ5.0 thru SMCJ90A devices and VF= 5.0V onSMCJ100 thru SMCJ440A devices. Operating junction and storage temperature range °C WattsP D 3.5/5.0V F Peak forward surge current, 8.3 ms single half sine- wave unidirectional only (1) Maximum instantaneous forward voltage at 100 A for unidirectional only (2) Peak power dissipation with a 10/1000μs waveform Peak pulse current wih a 10/1000μs waveform (1) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. See Next Table –55 to +150 Power dissipation on infinite heatsink at T L = 75 °C T J , T STG

N AVERAGE FORWARD CURRENT, (A) 0 100 1 200 25 100 100 30 175 0 0 6.5 0.1 30 70 6.5 10000 0.45 175 0 0.2 100 0.5 76 15 0 1.5 33 22 3 31 3 41 0 Fig. 3 - Steady State Power Derating Curve Fig. 1 - Pulse Derating Curve Fig. 2 - Maximum Non-Repetitive Surge Current Fig. 4 - Peak Pulse Power Rating Curve Fig. 5 - Pulse Waveform TJ = TJ max. 8.3 ms Single Half Sine-Wave 120 160 200 1 10 100 Number of Cycles at 60 Hz Peak Forward Surge Current, (A) 100 0 25 50 75 100 125 150 175 200 Ambient Temperature ,Ta (℃) Peak Pulse Derating in % of Peak Power or Current, % 0.1 100 0.1 1 10 100 1000 10000 Pulse Width, td Peak Power (kW) 0.1μs 1μs 10μs 100μs 1ms 10ms 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 0 25 50 75 100 125 150 175 200 Lead Temperature , T L (℃) Steady State Power Dissipation, (W) 100 01234 Time , (ms) Peak Pulse Current , (% ) TJ = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM 10/1000 μsec. Waveform as de fin ed by R.E.A. Tr=10μs Peak Value , (Ipp) Half Value = Ipp td SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMCJ Series 2www.paceleader.tw

Uni-polar Bi-polar Uni Bi Min (V) Max (V) IT (mA) Maximum Clamping Voltage Vc (Volts) @Ipp Maximum Reverse Leakage IR(uA) @VRWM Working PeakRevers e Voltage VRWM (Volts) TECHNOLOGIES SMCJ SERIES Breakdown voltage VBR @ IT Device Marking Code Maximum Reverse Surge Current Ipp(A) @10x1000us sinewave SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMCJ Series www.paceleader.tw 3

Uni-polar Bi-polar Uni Bi Min (V) Max (V) IT (mA) Maximum Clamping Voltage Vc (Volts) @Ipp Maximum Reverse Leakage IR(uA) @VRWM Working PeakRevers e Voltage VRWM (Volts) TECHNOLOGIES SMCJ SERIES Breakdown voltage VBR @ IT Device Marking Code Maximum Reverse Surge Current Ipp(A) @10x1000us sinewave SMCJ58 SMCJ58C GGF BGF 64.4 78.7 1 5.0 58 14.6 103 SMCJ60 SMCJ60C GGH BGH 66.7 81.5 1 5.0 60 14.0 107 SMCJ64 SMCJ64C GGL BGL 71.1 86.9 1 5.0 64 13.2 114 SMCJ64A SMCJ64CA GGM BGM 71.1 78.6 1 5.0 64 14.6 103 SMCJ70 SMCJ70C GGN BGN 77.8 95.1 1 5.0 70 12.0 125 SMCJ70A SMCJ70CA GGP BGP 77.8 86.0 1 5.0 70 13.3 113 SMCJ75 SMCJ75C GGQ BGQ 83.3 102 1 5.0 75 11.2 134 SMCJ75A SMCJ75CA GGR BGR 83.3 92.1 1 5.0 75 12.4 121 SMCJ78 SMCJ78C GGS BGS 86.7 106 1 5.0 78 10.8 139 SMCJ78A SMCJ78CA GGT BGT 86.7 95.8 1 5.0 78 11.9 126 SMCJ80 SMCJ80C GGA BGA 89.0 109 1 5.0 80 10.5 143 SMCJ80A SMCJ80CA GGB BGB 88.8 97.6 1 5.0 80 11.6 130 SMCJ85 SMCJ85C GGU BGU 94.4 115 1 5.0 85 9.93 151 SMCJ85A SMCJ85CA GGV BGV 94.4 104 1 5.0 85 10.9 137 SMCJ90 SMCJ90C GGW BGW 100 122 1 5.0 90 9.38 160 SMCJ90A SMCJ90CA GGX BGX 100 111 1 5.0 90 10.3 146 SMCJ100 SMCJ100C GGY BGY 111 136 1 5.0 100 8.38 179 SMCJ100A SMCJ100CA GGZ BGZ 111 123 1 5.0 100 9.26 162 SMCJ110 SMCJ110C GHD BHD 122 149 1 5.0 110 7.65 196 SMCJ110A SMCJ110CA GHE BHE 122 135 1 5.0 110 8.47 177 SMCJ120 SMCJ120C GHF BHF 133 163 1 5.0 120 7.01 214 SMCJ120A SMCJ120CA GHG BHG 133 147 1 5.0 120 7.77 193 SMCJ130 SMCJ130C GHH BHH 144 176 1 5.0 130 6.49 231 SMCJ130A SMCJ130CA GHK BHK 144 159 1 5.0 130 7.18 209 SMCJ140 SMCJ140C GHA BHA 156 190 1 5.0 140 5.99 251 SMCJ140A SMCJ140CA GHB BHB 155 171 1 5.0 140 6.61 227 SMCJ150 SMCJ150C GHL BHL 167 204 1 5.0 150 5.60 268 SMCJ150A SMCJ150CA GHM BHM 167 185 1 5.0 150 6.17 243 SMCJ160 SMCJ160C GHN BHN 178 218 1 5.0 160 5.23 287 SMCJ160A SMCJ160CA GHP BHP 178 197 1 5.0 160 5.79 259 SMCJ170 SMCJ170C GHQ BHQ 189 231 1 5.0 170 4.93 304 SMCJ170A SMCJ170CA GHR BHR 189 209 1 5.0 170 5.45 275 SMCJ180 SMCJ180C GHS BHS 200 245 1 5.0 180 4.66 322 SMCJ180A SMCJ180CA GHT BHT 200 220 1 5.0 180 5.14 292 SMCJ190 SMCJ190C GHU BHU 211 258 1 5.0 190 4.41 340 SMCJ190A SMCJ190CA GHV BHV 211 232 1 5.0 190 4.87 308 SMCJ200A SMCJ200CA GHW BHW 224 247 1 5 200 4.63 324 SMCJ220A SMCJ220CA GHX BHX 246 272 1 5 220 4.21 356 SMCJ250A SMCJ250CA GHZ BHZ 279 309 1 5 250 3.70 405 SMCJ300A SMCJ300CA GJE BJE 335 371 1 5 300 3.09 486 SMCJ350A SMCJ350CA GJG BJG 391 432 1 5 350 2.65 567 SMCJ400A SMCJ400CA GJK BJK 447 494 1 5 400 2.31 648 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMCJ Series www.paceleader.tw 4

Uni-polar Bi-polar Uni Bi Min (V) Max (V) IT (mA) Maximum Clamping Voltage Vc (Volts) @Ipp Maximum Reverse Leakage IR(uA) @VRWM Working PeakRevers e Voltage VRWM (Volts) TECHNOLOGIES SMCJ SERIES Breakdown voltage VBR @ IT Device Marking Code Maximum Reverse Surge Current Ipp(A) @10x1000us sinewave SMCJ440A SMCJ440CA GJM BJM 492 543 1 5 440 2.10 713 Note: 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices. 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double . 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device. SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMCJ Series www.paceleader.tw 5