SMCJ_V01 HY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

  • For surface mounted applications in order to RoHS
  • Low profile space COMPLIANT
  • Glass passivated chip
  • Fast response time: typically less than 1.0ns for Uni-direction,less than 5.0ns fo Bi-direction,from 0 Volts to BV min Mechanical Data
  • Case: SMC molded plastic
  • Polarity: Color band denotes cathode Note: Products with logo or are made by HY Electronic (Cayman) Limited.

Applications

  • Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs,MOSFET。 Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol Unit Peak pulse power dissipation with a 10/1000μs waveform PPPM W Peak pulse current with a waveform IPPM W Peak Forward Surge Current, 8.3mS Single Half Sine-Wave, Superimposed on Rated Load (JEDEC Method) Typical Thermal Resistance Junction to Lead (Note 1) RθJL ℃/W Typical Thermal Resistance Junction to Ambient (Note 1) RθJA ℃/W Operating Junction Temperature Range TJ ℃ Storage Temperature Range TSTG ℃ 2. 8.3ms single half sine-wave duty cycle= 4 pulses per minutes maximum (uni-directional units only) 3. The typical data above is for reference only . SMCJ*-13-99-00/01 Rev. 11, 18-May-2020 SMCJ SERIES Surface Mount Unidirectional and Bidirectional Transient Voltage Suppressors Reverse Voltage 5.0 - 440 Volts Power Dissipation - 1500 Watts Pb optimize board space
  • Typical IR less than 1µA above 10V www.hygroup.com.tw Package Outline Dimensions in Inches (Millimeters) Value 1500 See Next Table -55 to + 150 -55 to + 150 IFSM 200 A All d ata sheet.com

Rating and Characteristic Curves SMCJ SERIES The curve above is for reference only. SMCJ*-13-99-00/01 Rev. 11, 18-May-2020 100 150 200 250 1 10 100 Peak Forward Surge Current (A) Fig. 2 - Maximum Non-Repetitive Surge Current Number of Cycles at 60Hz TJ=TJmax 8.3mS Single Half Sine-Wave (JEDEC Method) 100 0 25 50 75 100 125 150 Fig. 1 - Maximum Non-Repetitive Peak Forwaed Surge Current Peak Forward Surge Current (A) Fig. 5 - Pulse Rating Curve PP, Peak Power (KW) 0.1 100 0.1 1 10 100 1000 10000 TA=25℃ Non-Repetive Pulse Wave Form Shown in Fig. 3 TP, Pulse Waveform 100 1000 10000 1 10 100 1000 Fig.4- Typical Junction Capacitance Capacitance, (pF) Stand-off voltage (V) 100 110 120 0 0.5 1 1.5 2 2.5 3 3.5 4 Fig. 3 - Pulse Waveform IP, Peak Pulse Current.(%) T, Time (ms) Pulse With (Tp) is Defined as that Point Where the Peak Current Decays to 50% of IRSM. 10/1000 us Waveform as Defined by R.E.A TJ=25℃ TP Peak value(IRSM) Half value = IRSM TR=10us TJ=25℃ Ambient Temperature (℃) Bi-directional Uni-directional All d ata sheet.com

Current(3) Maximum Reverse Leakage at VWM (4) UNI BI VWM (V) Min(V) Max(V) @ IT(mA) VC (V) IPPM (A) ID (µ A) SMCJ85A SMCJ85CA 85 94.4 104 1.0 137 10.9 1.0 SMCJ90A SMCJ90CA 90 100 111 1.0 146 10.3 1.0 SMCJ100A SMCJ100CA 100 111 123 1.0 162 9.3 1.0 SMCJ110A SMCJ110CA 110 122 135 1.0 177 8.5 1.0 SMCJ120A SMCJ120CA 120 133 147 1.0 193 7.8 1.0 SMCJ130A SMCJ130CA 130 144 159 1.0 209 7.2 1.0 SMCJ150A SMCJ150CA 150 167 185 1.0 243 6.2 1.0 SMCJ160A SMCJ160CA 160 178 197 1.0 259 5.8 1.0 SMCJ170A SMCJ170CA 170 189 209 1.0 275 5.5 1.0 Notes :1.Pulse test : Tp ≦ 50ms. 2.Surge current waveform Per Fig. 3 and derate Per Fig. 1. 3.For bi-directional types with VWM of 10 V and less, the ID limit is doubled 4.VF = 3.5 V at IF = 25 A (uni-directional only) SMCJ*-13-99-00/01 Rev. 11, 18-May-2020 SMCJ SERIES Breakdown Voltage at IT2 V(BR) (V) Part number with C donoteo Bi- Directional All d ata sheet.com

Current(3) Maximum Reverse Leakage at VWM (4) UNI BI VWM (V) Min(V) Max(V) @ IT(mA) VC (V) IPPM (A) ID (µ A) SMCJ188A SMCJ188CA 188 209 231 1.0 328 4.6 1.0 SMCJ200A SMCJ200CA 200 224 247 1.0 324 4.6 1.0 SMCJ220A SMCJ220CA 220 246 272 1.0 356 4.2 1.0 SMCJ250A SMCJ250CA 250 279 309 1.0 405 3.7 1.0 SMCJ300A SMCJ300CA 300 335 371 1.0 486 3.1 1.0 SMCJ350A SMCJ350CA 350 391 432 1.0 567 2.6 1.0 SMCJ400A SMCJ400CA 400 447 494 1.0 648 2.3 1.0 SMCJ440A SMCJ440CA 440 492 543 1.0 713 2.1 1.0 Notes :1.Pulse test : Tp ≦ 50ms. 2.Surge current waveform Per Fig. 3 and derate Per Fig. 1. 3.For bi-directional types with VWM of 10 V and less, the ID limit is doubled 4.VF = 3.5 V at IF = 25 A (uni-directional only) SMCJ*-13-99-00/01 Rev. 11, 18-May-2020 SMCJ SERIES Breakdown Voltage at IT2 V(BR) (V) Part number with C donoteo Bi- Directional All d ata sheet.com

ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require- ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi- lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet- ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers- onnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of HY. Product names and markings noted herein may be trademarks of their respective owners. Rev. 11, 18-May-2020 Disclaimer All d ata sheet.com