SMCJ JUXING | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Maximum Ratings and Thermal Characteristics (TA=25℃ unless otherwise noted) Parameter Symbol Value Unit PPPM 1500 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Superimposed on Rated Load(JEDEC method)(Note2,3)- Unidirectional only IFSM 200 Maximum Instantaneous Forward Voltage at 100A for Unidirectional only (Note 4) VF A V PINNING PIN

DESCRIPTION

Simplified outline SMC and symbol Unipolar Bipolar Operating Junction and Storage Temperature Range Tj TSTG -55 to 150 ℃ Peak Pulse Power Dissipation at =25 Tp=1mS TA (Note 1) 3.5/5.0 NOTES: Surface Mount Transient Voltage Suppressor Power 1500W SMCJ Series 1. Non-repetitive current pulse , per Fig. 3 and derated above TJ (initial) =25°C per Fig. 2. 2. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. 3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts. 5.For bidirectional type having VR of 10 volts and less, the IR limit is double 6.For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts terminal fnish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)

  • Pb-free E3 means 2nd level interconnect is Pb-free and the
  • RoHS compliant
  • Matte tin lead–free plated
  • Meet MSL level1, per J-STD-020, LF maximun peak of 260°C Laboratories
  • Plastic package is flammability rated V-0 per Underwriters Coeffcient, typical value is 0.1%)
  • VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature
  • High temperature to reflow soldering guaranteed: 260°C/40sec
  • Glass passivated chip junction
  • Fast response time: typically less than 1.0ps from 0V to BV min
  • EFT protection of data lines in accordance with IEC 61000-4-4
  • ESD protection of data lines in accordance with IEC 61000-4-2
  • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) per its table 4a and 4c
  • Whisker test is conducted based on JEDEC JESD201A
  • Typical failure mode is short from over-specifed voltage or current
  • Built-in strain relief
  • Low profle package
  • For surface mounted applications to optimize board space
  • Typical IR less than 1μA when VBR min>12V
  • Low incremental surge resistance
  • Excellent clamping capability repetition rate (duty cycles):0.01%
  • μs waveform, 1500W peak pulse power capability at 10/1000 (0.0077oz)
  • Approx. Weight: 0.22g MIL-STD-750, Method 2026
  • Terminals: Solderable per
  • Case: SMC

FEATURES

  1. The PPPM of stacked-die parts is 2000W and please contact littelfuse for the detail stacked-die parts. http://www.trr-jx.com version: 02

Characteristics at Ta = 25°C Type Reverse Stand-off Voltage Breakdown Voltage VRMW VBR @ IT Min(V) Max(V) A Test Current Max Clamping Voltage Peak Pulse Current IT mA VC @ IPP IPP UNI BI μA Marking SMCJ5.0A SMCJ6.0A SMCJ6.5A SMCJ7.0A SMCJ7.5A SMCJ8.0A SMCJ8.5A SMCJ9.0A SMCJ10A SMCJ11A SMCJ12A SMCJ13A SMCJ14A SMCJ15A SMCJ16A SMCJ17A SMCJ18A SMCJ20A SMCJ22A SMCJ24A SMCJ26A SMCJ28A SMCJ30A SMCJ33A SMCJ36A SMCJ40A SMCJ43A SMCJ45A SMCJ48A SMCJ51A SMCJ54A SMCJ58A SMCJ60A SMCJ64A SMCJ70A SMCJ75A SMCJ78A SMCJ85A SMCJ90A SMCJ100A SMCJ110A SMCJ120A SMCJ130A SMCJ150A SMCJ160A SMCJ170A SMCJ180A SMCJ200A SMCJ220A SMCJ250A SMCJ300A SMCJ350A SMCJ400A SMCJ440A SMCJ5.0CA SMCJ6.0CA SMCJ6.5CA SMCJ7.0CA SMCJ7.5CA SMCJ8.0CA SMCJ8.5CA SMCJ9.0CA SMCJ10CA SMCJ11CA SMCJ12CA SMCJ13CA SMCJ14CA SMCJ15CA SMCJ16CA SMCJ17CA SMCJ18CA SMCJ20CA SMCJ22CA SMCJ24CA SMCJ26CA SMCJ28CA SMCJ30CA SMCJ33CA SMCJ36CA SMCJ40CA SMCJ43CA SMCJ45CA SMCJ48CA SMCJ51CA SMCJ54CA SMCJ58CA SMCJ60CA SMCJ64CA SMCJ70CA SMCJ75CA SMCJ78CA SMCJ85CA SMCJ90CA SMCJ100CA SMCJ110CA SMCJ120CA SMCJ130CA SMCJ150CA SMCJ160CA SMCJ170CA SMCJ180CA SMCJ200CA SMCJ220CA SMCJ250CA SMCJ300CA SMCJ350CA SMCJ400CA SMCJ440CA GDE GDG GDK GDM GDP GDR GDT GDV GDX GDZ GEE GEG GEK GEM GEP GER GET GEV GEX GEZ GFE GFG GFK GFM GFP GFR GFT GFV GFX GFZ GGE GGG GGK GGM GGP GGR GGT GGV GGX GGZ GHE GHG GHK GHM GHP GHR GHT GHV GHX GHZ GJE GJG GJK GJM BDE BDG BDK BDM BDP BDR BDT BDV BDX BDZ BEE BEG BEK BEM BEP BER BET BEV BEX BEZ BFE BFG BFK BFM BFP BFR BFT BFV BFX BFZ BGE BGG BGK BGM BGP BGR BGT BGV BGX BGZ BHE BHG BHK BHM BHP BHR BHT BHV BHX BHZ BJE BJG BJK BJM Maximum Reverse Leakage UNI BI V IR V 6.5 7.5 8.5 100 110 120 130 150 160 170 180 200 220 250 300 350 400 440 6.4 6.67 7.22 7.78 8.33 8.89 9.44 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 22.2 24.4 26.7 28.9 31.1 33.3 36.7 44.4 47.8 53.3 56.7 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 201 224 246 279 335 391 447 492 7.37 7.98 8.6 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 92.1 95.8 104 111 123 135 147 159 185 197 209 222 247 272 309 371 432 494 543 9.2 10.3 11.2 12.9 13.6 14.4 15.4 18.2 19.9 21.5 23.2 24.4 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 292 324 356 405 486 567 648 713 163 145.7 134 125 116.3 110.3 104.2 97.4 88.3 82.5 75.4 69.8 64.7 61.5 57.7 54.4 51.4 46.3 42.3 38.6 35.7 33.1 28.2 25.9 23.3 21.7 20.6 19.4 18.2 17.3 16.1 15.5 14.6 13.3 12.4 11.9 10.3 9.3 8.5 7.8 7.2 6.2 5.8 5.5 5.1 4.6 4.2 3.7 3.1 2.6 2.3 2.1 800 800 500 200 100

Fig.3 Forward Current Derating Curve Fig.5 Maximum Non-Repetitive Peak Forward Surge Current 10 1001 120 200 160 240 I ,PEAK FORWARD SURGE CURRENT,FSM AMPERES Number of Cycles at 60Hz PEAK PULSE POWER(P )OR CURRENT(I )PP PP DERATINGIN PERCENTAGE% T ,AMBIENT TEMPERATURE,A °C 100 Fig.2 Pulse Waveform 1.0 2.0 3.0 4.0 150 I ,Peak Pulse Current (%)ppm T,TIME,ms Peak Value Ippm Half Value-Ipp/2 10/1000usec Waveform as Defined bye R.E.A. Pulse Width (td) is Defined as the Point where the Peak. Current Decayst to 50% of Ipp TA=25 t =10us f TJ=TJmax 8.3ms Single Half Sinepwave JEDEC Method Fig.1 Peak Pulse Power Rating Curve 10.1 100 10 100 1000 10000 P ,PEAK PULSE FORWARD ,kWPPM t ,PULSE WIDTH ,usd Non-Repetive Pulse.Wavefom Shown in Figure.3 T =25A °C 0.31x0.31" (80 x 80mm) Copper pad Area Uni-directional @ VR Uni-directional V=0V Bi-directional V= 0V Bi-directional @ VR Fig.4 Typical Junction Capacitance 1000 10000 100000 100 Cj (pF) 1 10 100 1000 V - Reverse Breakdown Voltage (V)BR td Tj=25℃ f=1MHz Vsig=mVp-p Surface Mount Transient Voltage Suppressor Power 1500W SMCJ Series Characteristic Curves A =25 ℃ unless otherwise noted) http://www.trr-jx.com version: 02

Plastic surface mounted package; 2 leads SMC D E1 V AM A C E A b UNIT mm max min A CE D E1 L 1.0 1.7 b 2.75 3.25 mil max min 0.21 0.05 103 280 244 319 79 260 220 307 5.9 32 108 1288.3 2.0 SMC mechanical data L The recommended mounting pad size 3.8 (150) 4.1 (160) 4.3 (170) Unit ：mm (mil) 4.1 (160) Surface Mount Transient Voltage Suppressor Power 1500W SMCJ Series http://www.trr-jx.com version: 02