SMC15002URM TRIPPLITE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
Protects Mission-Critical Electronic Equipment Provides fully regulated pure sine wave AC output compatible with active PFC power supplies● Audible alarm signals loss of utility power, overload and low battery●
8 NEMA 5-15R outlets●
10-ft. (3.05 m) power cord with 120V NEMA 5-15P input● 570-joule surge suppression rating● Highlights Corrects under- and overvoltages from 83V to 147V Monitoring of power conditions via POWERALERT12 Interactive LCD monitoring screen 17.7 min. runtime at half load; 6.5 min. at full load Package Includes SMC15002URM SmartPro 120V 1.5kVA 1kW Line-Interactive Sine Wave UPS USB cable● UPSHDEARKIT mounting hardware Owner’s manual●
Supports half load up to 17.7 min. and full load up to 6.5 min.● Internal batteries designed for hot-swap field replacement● 94% line-power efficiency rating saves money in energy costs● Automatic Voltage Regulation (AVR) Maintains 120V nominal output over input range of 83V-147V without using battery power● EMI/RFI Line Noise Filtering Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance Interactive LCD Screen Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes● Supports multiple advanced user setup and operating preferences● Rotates for easy viewing in rack-mount or tower configurations● Communications Ports USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert EPO port supports emergency shutdown in large facilities● Versatile Installation Options UPSHDEARKIT 2- and 4-post hardware included for front-vertical-rail mounting in 2U of EIA-standard 19 in. rack Mounts on wall with optional 2POSTRMKITWM● Mounts in upright tower position with optional 2-9USTAND● Mounts with extra front-to-rear support in 4-post racks with optional 4POSTRAILKIT● OVERVIEW UPC Code 037332186249 UPS Type Line-Interactive INPUT Rated input current (Maximum Load)12A Nominal Input Voltage(s) Supported120V AC UPS Input Connection Type 5-15P Input Circuit Breakers 15A UPS Input Cord Length (ft.) 10
UPS Input Cord Length (m) 3.1 Recommended Electrical Service 15A 120V Input Phase Single-Phase OUTPUT Output Volt Amp Capacity (VA) 1500 Output Capacity (kVA) 1.5 Output Watt Capacity (Watts) 1000 Output kW Capacity (kW) 1.0 Nominal Voltage Details 120v nominal output in battery mode Frequency Compatibility 60 Hz Output Voltage Regulation (Line Mode) -21%, +8% Output Voltage Regulation (Battery Mode) +/- 5% Output AC Waveform (AC Mode) Sine wave Output AC Waveform (Battery Mode) Pure Sine wave Nominal Output Voltage(s) Supported 110V; 115V; 120V Output Receptacles (8) 5-15R Individually Controllable Load BanksNo BATTERY Battery Type Valve Regulated Lead Acid (VRLA) Full Load Runtime (min.) 6.5 min. (1000w) Half Load Runtime (min.) 17.7 min. (500w) Expandable Runtime No DC System Voltage (VDC) 36 Battery Recharge Rate (Included Batteries) Less than 4.5 hours from 10% to 90% (typical, full load discharge) Battery Access Front panel battery access door Internal UPS Replacement Battery Cartridge <a class="productLink" href="//www.tripplite.com/2U-UPS-Replacement-36VDC-Battery-Cartridge-1-set-3- select-Tripp-Lite-SmartPro-UPS~RBC93-2U">RBC93-2U</a> Battery Replacement Description Hot-swappable, user replaceable batteries VOLTAGE REGULATION Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 Overvoltage Correction Input voltages between 128 and 147 are reduced by 12%
Undervoltage Correction Input voltages between 83 and 107 are boosted by 14% USER INTERFACE, ALERTS & CONTROLS Front Panel LCD Display Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) Switches 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions Alarm Cancel Operation Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions SURGE / NOISE SUPPRESSION UPS AC Suppression Joule Rating 570 UPS AC Suppression Response Time Instantaneous EMI / RFI AC Noise Suppression Yes PHYSICAL Primary Form Factor Rackmount Cooling Method Fan Included Mounting Accessory
Description
Includes UPSHDEARKIT for 2 point front-mount and 2 point center-mount rackmount installation in 2 and 4 post racks, plus wallmount installation; For additional stability in 4 post racks, consider optional 4 post mounting accessories 4POSTRAILKIT and 4POSTRAILKITWM Installation Form Factors Supported with Included Accessories 2 post 19 inch rackmount; 2 post front mount; 4 post 19 inch rackmount Installation Form Factors Supported with Optional Accessories 4 post rackmount full-depth ( <a class="productLink" href="//www.tripplite.com/4-Post-Rack-Mount-Installation- Kit-select-Rack-Mount-UPS-Systems~4POSTRAILKIT">4POSTRAILKIT</a> ); Tower ( <a class="productLink" href="//www.tripplite.com/2U-9U-Tower-Stand-Kit-select-Rack-Mount-UPS-Systems~2- 9USTAND">2-9USTAND</a> ); Wallmount ( <a class="productLink" href="//www.tripplite.com/2-Post- Rack-Mount-Wall-Mount-Adapter-Kit-select-Rack-Mount-UPS- Systems~2POSTRMKITWM">2POSTRMKITWM</a> ) Minimum Required Rack Depth (cm)41.91 Minimum Required Rack Depth (inches) 16.5 Optional Mounting Accessory NotesOptional <a class="productLink" href="//www.tripplite.com/2U-9U-Tower-Stand-Kit-select-Rack-Mount-UPS- Systems~2-9USTAND">2-9USTAND</a> enables upright tower UPS placement; <a class="productLink" href="//www.tripplite.com/4-Post-Rack-Mount-Installation-Kit-select-Rack-Mount-UPS- Systems~4POSTRAILKIT">4POSTRAILKIT</a> enables installation in 4-post standard depth racks from 20.5 to 36 inches (521 to 914mm); <a class="productLink" href="//www.tripplite.com/4-Post-1U-Universal- Adjustable-Rack-Mount-Shelf-Kit-for-Wall-Mount-Racks~4POSTRAILKITWM">4POSTRAILKITWM</a> enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm) Primary UPS Depth (mm) 342 Primary UPS Height (mm) 88 Primary UPS Width (mm) 439 Rack Height 2U Shipping Dimensions (hwd / cm) 22.10 x 50.80 x 59.44
Shipping Dimensions (hwd / in.) 8.70 x 20.00 x 23.40 Shipping Weight (kg) 23.95 Shipping Weight (lbs.) 52.80 UPS Housing Material Steel UPS Power Module Dimensions (hwd, cm) 8.76 x 43.94 x 34.16 UPS Power Module Dimensions (hwd, in.) 3.45 x 17.3 x 13.45 UPS Power Module Weight (kg) 21.09 UPS Power Module Weight (lbs.) 46.5 ENVIRONMENTAL Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Relative Humidity 0 to 95%, non-condensing AC Mode BTU / Hr. (Full Load) 223 Battery Mode BTU / Hr. (Full Load)650 AC Mode Efficiency Rating (100% Load) 94% Operating Elevation (ft.) 0-3000M (0-10,000 Ft) Audible Noise 45 dBA maximum, front side 1m Operating Elevation (m) 0 - 3000 m COMMUNICATIONS Network Monitoring Port DescriptionSupports detailed monitoring of UPS and site power conditions PowerAlert Software For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at https://www.tripplite.com/poweralert Communications Cable USB cabling included WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications Network UPS Tools Compatibility NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite Network Management Card Description Network management not supported Communications Interface DB9 Serial; EPO (emergency power off); USB (HID enabled) LINE / BATTERY TRANSFER Transfer Time 5 milliseconds (AC to battery), 1 milliseconds (Battery to AC) Low Voltage Transfer to Battery Power (Setpoint) 83 High Voltage Transfer to Battery Power (Setpoint) 147
© 2022 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: https://www.tripplite.com/products/product-certification-agencies FEATURES & SPECIFICATIONS Grounding Lug Back panel grounding lug Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported High Availability UPS Features Automatic Voltage Regulation (AVR); Hot swappable batteries; Sine wave output; Surge/noise protection STANDARDS & COMPLIANCE UPS Certifications Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA) WARRANTY Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note: <a class="insuranceLink" href="//www.tripplite.com/support/product-warranty-registration">Registration is required</a> for 3-year warranty. Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000 <a class="insuranceLink" href="//www.tripplite.com/support/insurance-policy">Ultimate Lifetime Insurance</a>