DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

www.anova-semi.com Revision: E Nov-19-2018 P. 1 Reverse Voltage: 5.0 to 120 V Peak Pulse Power: 1000 W Note: (3)VF<3.5V for devices of VBR<50V. (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Peak forward surge current, 8.3 ms single half sine-wave unidirectional only(2) IFSM 100 A Maximum instantaneous forward voltage at 25 A for unidirectional only(3) VF 3.5/5.0 V Operating junction and storage temperature range TJ, TSTG - 55 to +150 °C (1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1 Peak pulse current with a 10/1000μs waveform(1) IPP See Next Table A Power dissipation on infinite heatsink at TL = 75 °C PD 5.0 W Parameter Symbol Value Unit Peak power dissipation with a 10/1000μs waveform(1) PPP 1000 W Maximum Ratings(TA=25℃ unless otherwise noted) Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end except Bipolar Mounting position: Any RoHS compliant Mechanical Data Case: Molded plastic Very fast response time Surface Mount Transient Voltage Suppressors Features SMB/ DO-214AA Glass passivated chip

1000 W peak pulse power capability with a

10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability 0.148 [3.75] 0.130 [3.30] 0.191 [4.85] 0.171 [4.35] 0.087 [2.20] 0.078 [1.96] 0.096 [2.44] 0.084 [2.13] 0.012 [0.30] 0.006 [0.15] 0.059 [1.51] 0.030 [0.75] 0.008 [0.20] 0 [0.00] 0.217 [5.50] 0.201 [5.10]

www.anova-semi.com Revision: E Nov-19-2018 P. 2 AMBIENT TEMPERATURE , (℃)AVERAGE FORWARD CURRENT, (A) 0 100 1 100 25 100 100 22 175 0 0 5 0.1 20 75 5 1000 1 ## 0 5 150 0 0 7000 420 0.2 100 5 150 0.5 76 4300 250 1 50 5 150 1.5 33 4500 70 2 23 5 150 3 13 4100 50 4 10 Fig. 5 - Pulse Waveform Fig. 6 - Typical Junction Capacitance Ratings and Characteristics Curves (TA=25℃ unless otherwise noted) Fig. 1 - Pulse Derating Curve Fig. 2 - Maximum Non-Repetitive Surge Current Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 0.0 1.0 2.0 3.0 4.0 5.0 0 25 50 75 100 125 150 175 200 Steady State Power Dissipation, (W) Lead Temperature , TL (℃) 100 1 10 100 Peak Forward Surge Current, (A) Number of Cycles at 60 Hz TJ = TJ max. 8.3 ms Single Half Sine-Wave 100 0 25 50 75 100 125 150 175 200 Peak Pulse Derating in Percentage of Peak Power or Current, (%) Ambient Temperature ,TA (℃) 100 0 1 2 3 4 Peak Pulse Current , (% ) Time , (ms) TJ = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50 % of Ipp 10/1000 μsec. Waveform as defined by R.E.A. Peak Value (Ipp) Half Value = Ipp td Tr=10μs 0.1 100 0.1 1 10 100 1000 Peak Power (kW) Pulse Width ,td (μs) 100 1000 10000 1 10 100 1000 Junction Capacitance,CJ (pF) Reverse Breakdown Voltage,VBR (V) Bi-directional @VRWM Uni-directional @VRWM TJ=25 °C f=1.0MHz Bi-directional @zero bias Uni-directional @zero bias

www.anova-semi.com Revision: E Nov-19-2018 P. 3 Uni Bi Min (V) Max (V) IT (mA) Note: Maximum Clamping Voltage VC @IPP (V) 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics(TA=25℃ unless otherwise noted) Part Number (Uni) Part Number (Bi) Device Marking Code Breakdown Voltage VBR @IT Maximum Reverse Leakage IR @VRWM (uA) Working Peak Reverse Voltage VRWM (V) Maximum Reverse Surge Current IPP (A)