SMA11

SMA5.0 MIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com Stand-off Voltage 5.0 to 170 Volts SMA5.0 THRU SMA170CA Peak Pulse Power 300 Watts

FEATURES

• For surface mounted applications in order to optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition Rate (duty cycle): 0.01%
• Fast response time: typical less than 1.0ps from 0 volts to BV for unidirectional types
• Typical ID less than 1μA above 10V
• High temperature soldering: 250℃/W seconds at terminals
• Plastic package has Underwriters Laboratory Flammability Classification 94V-O MECHANICAL DATA
• Cass: JEDEC DO-214 AC, low profile molded plastic
• Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
• Polarity: Indicated by cathode band except bi-directional types
• Weight: 0.002 ounces, 0.064 gram
• Standard Packaging: 12mm tape per (EIA-481) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified Symbols Value Unit Peak Pulse Power Dissipation at TA=25℃(NOTE1,2,5)Fig.1 PPPM Minimum 400 Watts Peak Forward Surge Current per Figure 5 (NOTE 3) I FSM 40.0 Amps Peak Pulse Current on 10/10000μs wave from (NOTE1,FIG.2) IPPM See Table 1 Amps Steady Stage Power Dissipation (Note 4) P M(AV) 1.0 Watts Operating Junction and Storage Temperature Range T J, TSTG 50 to + 150 ℃ Notes: 1. Non-repetitive current pulse, per Fog.3 and derated above TA=25℃ per Fig.2 2. mounted on 5.0mm2 copper pads to each terminal. 3. 8.3ms single half sine-wave duty cycle = 4 pulses per minutes maximum. 4. Lead temperature at 75℃ = TL. 5. Peak pulse power waveform is 10/1000μS. DO-214AC(SMA) Dimensions in inches and (millimeters)

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com Stand-off Voltage 5.0 to 170 Volts SMA5.0 THRU SMA170CA Peak Pulse Power 300 Watts Electrical Characteristic (TA =25℃ unless otherwise noted) Device Marking Code (Note 4) Breakdown Voltage V(BR) (Volts) at Test Current IT (Note 1&2) Device Type UNI BI MIN MAX IT(mA) Working Peak Reverse Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (μA) (Note 3) Maximum Peak Pulse Surge Current IPPM* (Amps) Maximum Clamping Voltage at IPPM* VC (Volts) SMA7.0A 7V0A 7V0CA 7.78 8.6 10 7.0 200 25 12 SMA8.0 8V0 8V0C 8.89 10.9 1 8.0 50 20 15 SMA10 10V 10VC 11.1 13.6 1 10.0 5 16 18.8 SMA10A 10VA 10VCA 11.1 12.3 1 10.0 5 17.6 17 SMA12 12V 12VC 13.3 16.3 1 12.0 5 13.6 22 SMA13A 13VA 13VCA 14.4 15.9 1 13.0 5 14 21.5 SMA16A 16VA 16VCA 17.8 19.7 1 16.0 5 11.5 26 SMA18 18V 18VC 20 24.4 1 18.0 5 9.3 32.2 SMA18A 18VA 18VCA 20 22.1 1 18.0 5 10.3 29.2 SMA24 24V 24VC 26.7 32.6 1 24.0 5 7 43 SMA28 28V 28VC 31.1 38 1 28.0 5 6 50 SMA33 33V 33VC 36.7 44.9 1 33.0 5 5.1 59 Notes: *Peak Pulse power waveform in 10/1000 us

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com Stand-off Voltage 5.0 to 170 Volts SMA5.0 THRU SMA170CA Peak Pulse Power 300 Watts Electrical Characteristic (TA =25℃ unless otherwise noted) Device Marking Code (Note 4) Breakdown Voltage V(BR) (Volts) at Test Current IT (Note 1&2) Device Type UNI VA BI MIN MAX IT(mA) Working Peak Reverse Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (μA) (Note 3) Maximum Peak Pulse Surge Current IPPM* (Amps) Maximum Clamping Voltage at IPPM* VC (Volts) SMA36 36V 36VC 40 48.6 1 36.0 5 4.7 64.3 SMA36A 36 VA 36 VCA 40 44.2 1 36.0 5 5.2 58.1 SMA45 45V 45 VC 50 61.1 1 43.0 5 3.7 80.3 SMA45A 45 VA 45 VCA 50 55.3 1 45.0 5 4.1 72.7 SMA54 54V 54 VC 60 73.3 1 54.0 5 3.1 96.3 SMA54A 54 VA 54 VCA 60 66.3 1 54.0 5 3.4 87.1 SMA58 58V 58 VC 64.4 78.7 1 58.0 5 2.9 103 SMA60 60V 60 VC 66.7 81.5 1 60.0 5 2.8 107 SMA64 64V 64 VC 71.1 86.4 1 64.0 5 2.6 114 SMA64A 64 VA 64 VCA 71.1 78.6 1 64.0 5 2.9 103 SMA70 70V 70 VC 77.8 95.1 1 70.0 5 2.4 125 SMA70A 70 VA 70 VCA 77.8 86 1 70.0 5 2.7 113 SMA75 75V 75 VC 83.3 102 1 75.0 5 2.2 134 SMA75A 75 VA 75 VCA 83.3 92.1 1 75.0 5 2.5 121 SMA78 78V 78 VC 86.7 106 1 78.0 5 2.2 139 SMA78A 78 VA 78 VCA 86.7 95.8 1 78.0 5 2.4 126 SMA85 85V 85 VC 94.4 115 1 85.0 5 2 151 SMA85A 85 VA 85 VCA 94.4 104 1 85.0 5 2.2 137 SMA90 90V 90 VC 100 122 1 90.0 5 1.9 160 SMA90A 90 VA 90 VCA 100 111 1 90.0 5 2.1 146 SMA100 100V 100 VC 111 136 1 100.0 5 1.7 179 SMA100A 100 VA 100 VCA 111 123 1 100.0 5 1.9 162 SMA110 110V 110 VC 122 149 1 110.0 5 1.5 196 SMA110A 110 VA 110 VCA 122 135 1 110.0 5 1.7 177 SMA120 120V 120 VC 133 163 1 120.0 5 1.4 214 SMA120A 120 VA 120 VCA 133 157 1 120.0 5 1.6 193 SMA130 130V 130 VC 144 176 1 130.0 5 1.3 231 SMA130A 130 VA 130 VCA 144 159 1 130.0 5 1.4 209 SMA150 150V 150 VC 167 204 1 150.0 5 1.1 268 SMA150A 150 VA 150 VCA 167 185 1 150.0 5 1.2 243 SMA160 160V 160 VC 178 218 1 160.0 5 1 287 SMA160A 160 VA 160 VCA 178 197 1 160.0 5 1.2 259 SMA170 170V 170 VC 189 231 1 170.0 5 0.99 304 SMA170A 170VA 170VCA 189 209 1 170.0 5 1.09 275 Notes: (1) Suffix A denotes 5% tolerance device, no suffix A denotes 10% tolerance device (2) V(BR) measured after IT applied for 300μs IT=square wave pulse or equivalent (3) For bidirectional type having VWM of 10 volts and less, the ID limit is doubled (4) For bidirectional use C or CA suffixs for all types, electrical characteris apply in both directions

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com Stand-off Voltage 5.0 to 170 Volts SMA5.0 THRU SMA170CA Peak Pulse Power 300 Watts RATING AND CHARACTERISTIC CURVES SMA5.0 THRU SMA170CA CJ, CAPACITANCE, pF AMPERES PEAK FORWARD SURGE CURRENT,IFSM, PEAK PULSE CURRENT-%PPM,I DERATING IN PERCENTAGE % IPPPPP OR CURRENT( )PEAK PULSE POWER ( ) PEAK PULSE POWER, kWPPM,P NUMBER OF CYCLES AT 60Hz VOLTS(BR)V ,BREALDOWN VOLTAGE, AT ,AMBIENT TEMPERATURE (℃) dt ,PULSE WIDTH, SEC t, TIME, ms PEAK FOWARD SURGE CURRENT FIG.5- MAXIMUM NON-REPETITIVE FIG.4- TYPICAL JUNCTION CAPACITANCE FIG.3- PULSE WAVEFORM FIG.2- PULSE RATING CURVE FIG.1- PEAK PULSE POWER RATING CURVE JEDEC Method 8.3ms Single Half Since-Wave =T maxJJT MWVVoltage ( ) Stand-Off Measured at Zero Blas Measured at Vsig = 50mVp-p f = 1.0MHz TJ=25 ℃ e-kt td as Defined by R.E.A. 10/1000usec Waveform Half Value-lpp lppm Peak Value tf=10use Current Decays to 50% of lpp as the Point Where the Peak Pulse Width (td)is Defined TA=25 ℃ TA=25 ℃ Shown in Figure 3 Pulse Waveform Non-Repetitive Copper Land Areas Mounted on 5.0mm 100μs10μs1.0μs 100402010421 2001005020105.02.01.0 100 1,000 10,000 4.03.02.01.00 100 150 2001751501251007550250 100 10ms1.0ms0.1μs 0.1 1.0 100