SM800 POWERBOX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

L A B O R A T O R Y P O W E R S U P P LY

FEATURES

  • 800W Laboratory S upply
  • R anges 0- 7.5 V to 0- 400V and 0- 80A to 0 - 4A
  • D esigned for long life at full pow er
  • Excellent dynam ic response to load changes
  • P rotected against all overload and short circuit conditions
  • EM C surpasses C E requirem ents for low em ission & high Im m unity O ptional H igh speed program ing. Interfaces O ptional
  • Extra Isolation. S equencer. D igital Encoders. P ow er S ink Low audible noise - fans are tem perature controlled
  • M aster/S lave parallel and series operation w ith voltage and current sharing
  • H igh pow er system configuration from m ultiple units
  • 19" rack m ounting for for laboratory use (feet included)
  • S tacking is allow ed & space betw een units is not required SPECIFICATIO NS w w w .pow erbox.co.nz - 0800 104 480 IN PU T Input voltages 90 - 265Vac Input Frequency 4 8 - 62H z Pow er Factor B etter than 0.99 at full load Input Current 1.0A @ 230Vac Inrush current 22A at 230VAC Internal Fuse 12.5AT Standby Input Current 14 W w hen Vo = Io= 0 O U TPU T Output Voltage Range 0-7 .5V to 0-4 00V Auto ranging m odels See Selection Table Output Current Range 0-8 0A to 0-4 A Auto ranging m odels See Selection Table Output Pow er Range 0 to 8 00W See Selection Table EN VIR O N M EN TAL Operating Tem perature -20°C to +50°C (100% load) D erate output to 7 5% at 60°C Tem perature coefficient 0.02% ./°C Storage tem perature -4 0°C to 8 5°C. Therm al Protection Output shuts dow n in case of insufficient cooling H um idity m ax 95% RH , non condensing, up to 4 0°C m ax 7 5% RH , non condensing, up to 50°C STAN D AR D S & APPR O VALS Pow er supply standard EN61204 -3, CISPR22-Class B General Em ission EN61000-6-3 (EN55022-B ) General Im m unity EN61000-6-2 Safety EN60950/EN61010 M EC H AN IC AL M ounting Stacking of units allow ed, air flow is from left to right. Input Connector IEC320/C20, EN60320/C20 Output Term inals M 5 bolts Program m ing Connector 15 pole D -connector at rear panel (FEM ALE) Enclosure IP20 Protection D im ensions 8 6 x 221 x 4 06m m B ehind front panel (feet rem oved) 8 9 x 222m m , Front panel (1/2 19" 2U) W eight 5.4 kg

w w w .pow erbox.com .au - 1800 25 1 3 80 w w w .pow erbox.co.nz - 0800 104 480 SM 800 Series L A B O R A T O R Y P O W E R S U P P LY SPECIFICATIO NS D oc. No. SM 8 00 Rev.D 3-12-15 SELECTIO N TABLE AN ALO G PR O G R AM M IN G Program m ing Inputs: CV Input Range: 0 - 5V Accuracy: +/-0.2% Tem p. coeff. offset:: 10uV/C Input Im pedance: > 1M ohm Program m ing Inputs: CC Input Range: 0 - 5V Accuracy: +/-0.5% Offset: 0...+2.2m V (on 5V) Tem p. coeff. offset:: 50uV/C Input Im pedance: > 1M ohm M onitoring Outputs: CV Input Range: 0 - 5V Accuracy: +/-0.2% Offset: -1.1..0m V (on 5V) Tem p. coeff. offset:: 3uV/C Output Im pedance: > 2 ohm / m ax 4 m A M onitoring Outputs: CC Input Range: 0 - 5V Accuracy: +/-0.5% Offset: -1.1..0m V (on 5V) Tem p. coeff. offset:: 60uV/C Output Im pedance: > 2 ohm / m ax 4 m A Reference voltage Vref: 5.114 V +/-15m V (Ro = 2ohm , m ax 4 m A) TC: 20ppm +12V output Vo: 12V+/-0.23V Im ax: 0.2A Ro: 3ohm O PER ATIN G Relay Outputs ACF: AC-Fail, both NOP and NC contact D CF: D C-Fail,both NO and NC contact output voltages +/-5% beyond set point Status Outputs CC operation: 5V = logic1, (Ro = 500 Ohm ) CV or CC lim it: 5V = logic1, (Ro = 500 Ohm ) OT: Over Term p: 5V = logic1, (Ro = 500 Ohm ) PSOL, Pow ersink Overload: 5V = logic1, (Ro = 500 Ohm ) ACF , AC Fail: 5V = logice1, (Ro = 500 Ohm ) D CF D C Fail 5V = logice1, (Ro = 500 Ohm ) Rem ote ShutD ow n > w ith +5V, 1m A or relay contact Interlock Contact at rear of panel Indicators Voltage m eter, Am p m eter, AC-Fail, D C-Fail, Over Tem perature, Pow er Sink Overload, Rem ote Shutdow n,, Rem ote-CV, Rem ote-CC, Output On,CV-lim ite, CV- and CC- m ode Controls M ains on/off sw itch, CV and VV potm eter, CV and CC lim it potm eter, D ispllay Settings button, D isplay lim its button, Rem ote/Local button, Output On/off button, Fron panel lock button Series Operation M ax total voltage 600V M aster / Slave oeration yes Parallel Operation M ax total current - No lim it M aster / Slave operation - m ax 4 units (including m aster) Rem ote Sensing M ax volt, drop per load lead: 2V Lim its Voltage adjust range: 0 - 102% Current adjust range: 0 - 102% Potentiom eters & Encoders From front panel: Standard .03% Screw driver adj: Option P001 (at front panel) D igital Encoders: Option P220 Efficiency 8 7 % Typical Isolation Input - Output: 37 50Vrm s(1 m in) Creepage clearance; 8 m m Input - Case: 2500Vrm s Output - Case: 600VD C M TB F 500,000hrs O U TPU T SM 7.5 - 80 SM 18- 5 0 SM 70- AR - 24 SM 400- AR - 4 Output Voltage Range 0 - 7 .5V 0 - 18 V 0 - 7 0V 0 - 4 00V Output Current Range 0 - 8 0A 0 - 50A 0 - 24 A 0 - 4 A Autoranging (2 Ranges) No No Yes Yes M ax Output Current/Voltage - - 24 A / 0-35V 4 A / 0-200V - - 12A / 35 - 7 0V 2A / 200 - 4 00V M eters 3.5 digit 3.5 digit 3.5 digit 3.5 digit Scale voltage 0 - 7 .500 V 0 - 18 .0 V 0 - 7 0.0 V 0 - 4 00.0 V Scale current 0 - 8 0 A 0 - 50.0 A 0 - 24 .0 A 0 - 4 .0 A Accuracy 0.5% + 2 digit 0.5% + 2 digit 0.5% + 2 digit 0.5% + 2 digit

L A B O R A T O R Y P O W E R S U P P LY w w w .pow erbox.co.nz - 0800 104 480 TECHNICAL ILLUSTRATIO NS PR O G R AM M IN G SPEED STAN D AR D VER SIO N SM 7.5 - 80 SM 18- 5 0 SM 70- AR - 24 SM 400- AR - 4 Rise tim e (10 - 90% ) Output voltage step Tim e, (100 % load) Tim e, (10 % load) 0 - 7 .5 V 6.5 m s 2.5 m s 0 - 16 V 12 m s 5 m s 0 - 35 V 6 m s 2.5 m s 0 - 200 V 4 m s 2 m s Output voltage step Tim e, (100 % load) Tim e, (10 % load) - - 0 - 7 0 V 10 m s 7 m s 0 - 4 00 V 8 m s 5 m s Fall tim e (90 - 10% ) Output voltage step Tim e, (100 % load) Tim e, (10 % load) 7 .5 - 0 V 6.5 m s 62 m s 16 - 0 V 12 m s 120 m s 35 - 0 V 6 m s 60 m s 200 - 0 V 4 m s 4 2 m s Output voltage step Tim e, (100 % load) Tim e, (10 % load) - - 7 0 - 0 V 25 m s 250 m s 4 00 - 0 V 15 m s 155 m s SELECTIO N TABLE

L A B O R A T O R Y P O W E R S U P P LY w w w .pow erbox.co.nz - 0800 104 480 TECHNICAL ILLUSTRATIO NS