SM712-02HTG

SM712 LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

• RoHS compliant and lead-free
• ESD, IEC 61000-4-2, ±30kV contact, ±30kV air
• EFT , IEC 61000-4-4, 50A (5/50ns)
• Lightning, IEC 61000- 4-5 2nd edition, 19A P=8/20μs)
• Working Voltages: -7V to 12V
• Low clamping voltage
• Low leakage current
• AEC-Q101 Qualified
• Moisture Sensitivity Level (MSL -1)
• RS-485
• Fieldbus
• Modbus
• Profibus
• DMX512
• Security Systems
• AutomatedT eller Machines (ATMs)
• Lighting Control - DALI
• Communication Equipments Pinout and Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. RoHS Pb GREENSM712 Series 600W Asymmetrical TVS Diode Array 12V 12V IC A B RS-485 Port Receiver SM712 GND Additional Information Datasheet SamplesResources

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/09/17 TVS Diode Arrays (SPA® Diodes)TVS Diode Arrays (SPA ® Diodes)TVS Diode Arrays (SPA® Diodes) General Purpose ESD Protection - SM712 Notes: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units PPk Peak Pulse Power (tp=8/20μs) 600 W IPP Peak Pulse Current (tp=8/20μs) 19 A TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR≤1μA, Pin 3 to Pin 1 or Pin 2 7. 0 V IR≤1μA, Pin 1 or Pin 2 to Pin 3 12.0 V Reverse Breakdown Voltage VR IR=1mA, Pin 3 to Pin 1 or Pin 2 7. 5 V IR=1mA, Pin 1 or Pin 2 to Pin 3 13.3 V Leakage Current ILEAK VR=7V 20 μA VR=12V 1 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Pin 1 or Pin 2 to Pin 3 19 V IPP=1A, tp=8/20µs, Pin 3 to Pin 1 or Pin 2 11 V IPP=19A, tp=8/20µs, Pin 1 or Pin 2 to Pin 3 31 V IPP=19A, tp=8/20µs, Pin 3 to Pin 1 or Pin 2 19 V Dynamic Resistance1 RDYN (VC2 - VC1) / (IPP2 - IPP1) 0.5 Ω ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-GND Reverse Bias=0V , f=1MHz; Pin 1 or Pin 2 to Pin 3 75 pF Capacitance vs. Reverse Bias 02468 10 12 Bias Voltage (V) Capacitance (pF) Clamping Voltage vs. IPP 02468 10 12 14 16 18 20 Clamp Voltage (VC) Peak Pulse Current-IPP (A) Pin 3 to Pin1 or Pin 2 Pin 1 or Pin 2 to Pin 3 Notes : 1 . Parameter is guaranteed by design and/or device characterization.

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/09/17 TVS Diode Arrays (SPA® Diodes)TVS Diode Arrays (SPA® Diodes)TVS Diode Arrays (SPA® Diodes) General Purpose ESD Protection - SM712 Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Power Derating Curve 100 110 02 55 07 51 00 1251 50 Ambient Temperature - TA (oC) % of Rated Power I PP Non-Repetitive Peak Pulse Power vs. Pulse Time Pulse Duration - tp (µs) Peak Pulse Power - P pk (kW) 0.01 0.1 0.11 10 100 1000

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/09/17 TVS Diode Arrays (SPA® Diodes)TVS Diode Arrays (SPA ® Diodes)TVS Diode Arrays (SPA® Diodes) General Purpose ESD Protection - SM712

Ordering Information

Part Number Package Marking Min. Order Qty. SM712-02HTG SOT23-3 712 3000 Part Numbering SystemPart Marking System SM 02 T G Series Number of Channels Package T= Tape & Reel G= Green TVS Diode Arrays (SPA Diodes) H: SOT23-3 H712 Working Voltage 712 Pe E 1 2 b A D C N M 502B Pins 3 JEDEC TO-236 Millimeters Inches Min Max Min Max A 0.89 1. 12 0.035 0.044 A1 0.01 0.1 0.0004 0.004 b 0.3 0.5 0.012 0.020 c 0.08 0.2 0.003 0.008 D 2.8 3.04 0.110 0.120 E 2.1 2.64 0.083 0.104 E1 1. 2 1. 4 0.047 0.055 e 0.95 BSC 0.038 BSC e1 1 .90 BSC 0.075 BSC L1 0.54 REF 0.021 REF M – 2.29 – .090 N – 0.95 – 0.038 O – 0.78 – .030TYP P – 0.78 – .030TYP Recommended Pad Layout Pe E 1 2 b A D C N M 502B

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/09/17 TVS Diode Arrays (SPA® Diodes)TVS Diode Arrays (SPA® Diodes)TVS Diode Arrays (SPA® Diodes) General Purpose ESD Protection - SM712 GENERAL INFORMATION 1. 3000 PIECES PER REEL. 2. ORDER IN MULTIPLES OF FULL REELS ONLY. 3. MEETS EIA-481 REVISION "A" SPECIFICATIONS. COVER TAPE USER DIRECTION OF FEED PIN 1 SOT23-3 (8mm POCKET PITCH) 8.4mm 180mm 14.4mm 13mm 60mm ACCESS HOLE 8mm TAPE AND REEL Embossed Carrier T ape & Reel Specification — SOT23-3 Symbol Millimetres Inches Min Max Min Max E 1 .65 1 .85 0.065 0.073 F 3.40 3.60 0.134 0.142 P2 1 .90 2.10 0.075 0.083 D 1 .40 1 .60 0.055 0.063 P0 3.90 4.10 0.154 0.161 W 7 .70 8.30 0.303 0.327 P 3.90 4.10 0.154 0.161 A0 3.05 3.25 0.120 0.128 B0 2.67 2.87 0.105 0.113 K0 1. 12 1 .32 0.044 0.052 t 0.22 0.24 0.009 0.009 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.